per bake commands to bake the connected geometry with the corresponding materials.
mxDiff is a simple diffuse material. Only reflectance color for 0° and 90° are exposed.
mxEmit is a basic emitter material. You can set light color, power and efficiacy of the emitter.
mxBasic is the most complex material for now. You can set all the properties of a single layer material including. Use this for transparent materials.
mList is your way if you don't want to create your own materials. This component returns a list of all the materials on the Maxwell scene manager. Make sure this is evaluated after you add your own materials if you want to see them in the list.…
diseño, construcción y entendimiento de nuestro entorno.
BIM está poniendo a disposición de los diseñadores y gestores auténticas bases de datos que pueden generarse, conectarse y editarse de forma paramétrica, proporcionando una sólida capa de realidad a los ejercicios de diseño generativo y computación que son objeto de estudio en Algomad, el seminario que busca popularizar la programación y la parametrización en el diseño y en la experiencia de nuestro entorno construido.
Tras un paréntesis en 2015, Algomad vuelve con el objetivo de demostrar cómo una visión computacional del BIM es una oportunidad para mejorar la forma de trabajar de ingenieros, arquitectos, constructoras y operadores de edificios e infraestructuras, tendiendo un puente entre las técnicas de diseño digital más avanzadas y la realidad de la construcción.
Algomad 2016 tendrá lugar en el centro de Madrid, en IE School of Architecture and Design, IE University, los días 3, 4 y 5 de Noviembre de 2016 y comprenderá 4 talleres así como ponencias a cargo de expertos de primer nivel.
Estructura de Algomad 2016
Algomad 2016 se estructura en torno a tres áreas temáticas principales:
BIM, como la metodología total específica para el sector de la construcción.
Computación, englobando las aplicaciones de programación y parametrización al diseño de edificios e infraestructuras.
Realidad, como marco de trabajo, buscando siempre resolver problemas reales a través de los dos puntos anteriores.
Público objetivo
Arquitectos, arquitectos técnicos, ingenieros y en general académicos, estudiantes de últimos cursos y profesionales del mundo inmobiliario y de la construcción que compartan un interés por la digitalización de nuestro sector. Se espera un nivel mínimo en el uso de herramientas BIM y de parametrización. Algomad proporcionará formación adicional y gratuita en las herramientas básicas a emplear en los talleres para asegurar un correcto desempeño.…
te some implications and questions so I will go one by one:
"Now I would like to use a single VRay material as a template for creating multiple identical materials"I hope this will work, but as VRay does not expose any SDK, I would not guarantee any specific result.
"Now I need to add them to the document material table"This is done with a reference to a document instance, such as the one you get with the code doc.Materials (both in C# and Vb.Net).
"I'm not going to learn C# to modify his script"That's a pity, it would be nice to pass on this troublemaker to somebody else! :)Btw, C# and Vb.Net are very very similar. This script could be written in Vb.Net too.
"Reference to a non-shared member requires an object reference. (line 96)"This only means that you need to access the Materials property on an instance, not on the type (class) name. Change that line using what is written at point 2.
"Do I understand that the material has to be assigned to a particular object in order to enter the Material Table?"No it does not. But if you call the _Purge command it will be removed if it does not have an object that references it.
"Can I assign it to a Layer instead?"You do not need to. But this would be achieved with doc.Layers[whichLayer].RenderMaterialIndex = materialIndex; in C# or doc.Layers(whichLayer).RenderMaterialIndex = materialIndex in Vb.Net.
"Any ideas? A better way to do this?"If you found a way to bypass the VRay SDK not being there, this should work.
"Giulio's component has a type hint defined as a Material"It does not any longer. The hint was there in earlier versions of Grasshopper, but now the hint has disappeared. This is not so bad, and it is also the only way you would be able to use either a Material instance already or a string for a material name.
"How was that done?"Probably it was done in an older version of Grasshopper. But which version are you using?
"I can't figure out how to cast the input as a Rhino.DocObjects.Material, so you can see that I have cast it as a compatible type in the first 2 lines... is there a cleaner way?"That sounds like a good way actually. Be sure your component responds properly when something wrong is inputted, though.Dim mTemp As Rhino.DocObjects.Material = CType(M, Rhino.DocObjects.Material)in one line might also work. See msdn for more conversion operators and functions.
I hope this helps,
- Giulio_______________giulio@mcneel.com…
ther math and logic. i can usually conceptualise what i want to do and cobble some semi working thing together but don't know which components to use and how to patch it. so i'm super happy to have someone who knows what he's doing to find this interesting.
and i'm glad you mention the fanned frets again, there is one input parameter that's still missing for the multiscale frets to be fully parametric, it's the angle of the nut or which fret should be straight. it depends a bit on personal preferences and playing posture what is more comfortable. so being able to adjust this easily would be cool. again i have no idea how the maths for that work or if you can just rotate each fret the same amount around it's middle point. The input either as fret number (for the straight fret) or as a simple slider from bridge to nut should do as input setting.
Here are the two extremes and the middle ground:
i've been thinkin today while analysing your patches and cleaning up my mess what exactly the monster should do.
Here are the input parameters needed, i think it's the complete list
scale length low E string
scale length high e string
fret angle/straight fret
string width at nut
string width at bridge
number of frets
fretboard overhang at nut (distance from string to fretboard bounds)
fretboard overhang at last fret
string gauges
string tensions
fretboard radius at nut (for compound radius fretboard radius at bridge is calculated with the stewmac formula)
fretwire crown width
fretwire crown height
action height at nut (distance between bottom of string and fretwire crown top)
action height at last fret
pickup 1 neck position
pickup 2 middle position
pickup 3 bridge position
nut width
the pickup positions should be used to draw circles for the magnet poles on each string so they are perfectly aligned and can be used for the pickup flatwork construction. ideally they would need a rotation control aligning the center line of the pickup so it's somewher between the last fret angle and bridge angle. personally i do this visually depending on the design i'm looking for, some people have huge theories on pickup positioning but personally i don't believe in it.
that should result in everything needed to quickly generate all the necessary construction curves or geometry for nut/fingerboard/frets/pickups. this is the core of what makes a guitar work, the more precise this dynamic system is the better the guitar plays and sounds.
i posted another thread trying to understand how i could use datasets form spreadsheets,databse, csv to organize the input parameters. What would make sense for the strings for example is hook into a spreadsheet with the different string sets, i attached one for the d'Addario NYXL string line which basically covers all combos that make sense.
The string tension is an interesting one, and implmenting it would sure be overkill albeit super interesting to try. it should be possible to extrapolate from the scale length of each string what the tension for a given string gauge of that string would be so that you could say 'i want a fully balanced set' or 'heavy top light bottom) and it would calculate which SKU from d'addario would best match the required tension. All the strings listed in the spreadsheet are available as single strings to buy.
i'm trying to reorganize everything which helps me understand it. i just discovered the 'hidden wires' feature which is great since once i understood what a certain block does or have finished one of my own, i can get the wires out of the way to carry on undistracted. a bit risky to hide so many wires but it makes it so much easier not to get completely lost :-)
btw, the 'fanned fret' term is trademarked, some guy tried to patent it in the 80's which is a bit silly since it has been done for centuries. there is a level of sophistication above this as well, check out http://www.truetemperament.com/ and that really is something else. it really is astounding how superior the tuning is on those wigglefrets, the problem is that it's rather awkward for string bending and also you can't easily recrown or level the frets when they are used. …
e matching with a dedicated component which creates combinations of items. You can find the [Cross Reference] component in the Sets.List panel.
When Grasshopper iterates over lists of items, it will match the first item in list A with the first item in list B. Then the second item in list A with the second item in list B and so on and so forth. Sometimes however you want all items in list A to combine with all items in list B, the [Cross Reference] component allows you to do this.
Here we have two input lists {A,B,C} and {X,Y,Z}. Normally Grasshopper would iterate over these lists and only consider the combinations {A,X}, {B,Y} and {C,Z}. There are however six more combinations that are not typically considered, to wit: {A,Y}, {A,Z}, {B,X}, {B,Z}, {C,X} and {C,Y}. As you can see the output of the [Cross Reference] component is such that all nine permutations are indeed present.
We can denote the behaviour of data cross referencing using a table. The rows represent the first list of items, the columns the second. If we create all possible permutations, the table will have a dot in every single cell, as every cell represents a unique combination of two source list indices:
Sometimes however you don't want all possible permutations. Sometimes you wish to exclude certain areas because they would result in meaningless or invalid computations. A common exclusion principle is to ignore all cells that are on the diagonal of the table. The image above shows a 'holistic' matching, whereas the 'diagonal' option (available from the [Cross Reference] component menu) has gaps for {0,0}, {1,1}, {2,2} and {3,3}:
If we apply this to our {A,B,C}, {X,Y,Z} example, we should expect to not see the combinations for {A,X}, {B,Y} and {C,Z}:
The rule that is applied to 'diagonal' matching is: "Skip all permutations where all items have the same list index". 'Coincident' matching is the same as 'diagonal' matching in the case of two input lists which is why I won't show an example of it here (since we are only dealing with 2-list examples), but the rule is subtly different: "Skip all permutations where any two items have the same list index".
The four remaining matching algorithms are all variations on the same theme. 'Lower triangle' matching applies the rule: "Skip all permutations where the index of an item is less than the index of the item in the next list", resulting in an empty triangle but with items on the diagonal.
'Lower triangle (strict)' matching goes one step further and also eliminates the items on the diagonal:
'Upper Triangle' and 'Upper Triangle (strict)' are mirror images of the previous two algorithms, resulting in empty triangles on the other side of the diagonal line:
…
lts.
In the visualization, points is an interesting option. It's a matter of aesthetics I guess, I go with surfaces :) Also what you can try is selecting Filters -> Slice (you can also find it in the icons above the pipeline viewer), in the Slice options below the pipeline press Z normal and on the Z coordinate press some height relevant to the buildings (e.g. 1.75m a typical human scale). That would show you the flow around the buildings on that height. Experiment with selecting other normals and values. Keep playing with the filters there's some cool things in there. Also you can check out the mailing list and extensive paraview documentation.
Concerning the errors I apologize because I just downloaded your case.
It appears that the decomposeParDict is not included in the system folder. I am not sure if this is due to BF not going through the whole workflow yet or an ommission on our side. Please feel free to add it in Github. I will also note it down and pass it to Mostaph to check. In the meantime please find attached a VERY detailed decomposeParDict file. I took the liberty to set it at 4 processors (the numberOfSubDomains value) and also selected (that is uncommented) the scotch decomposition method. It's the easiest method to use since it is automatic and doesn't require any more inputs on how the domain is decomposed on the x,y,z directions (which would require you to change values in the attached file).
Now, the different folders created are simply snapshots of the current solution at the specific timestep. To control how often the solver is saving change the writeInterval number in the controlDict file. You can also change almost all these values on the fly, while OF is running.
Finally, concerning the other errors of parafoam it seems somehow parafoam is reading the intial condition names instead of actual results from the solution files and it doesn't like it.
Does this happen only when you open the case (i.e. at 0 time) or does it also happen when you move to an other timestep?
Also, are you using paraFoam, paraview or the paraFoam -builtin method?
The extension of the paraFoam file seems to be .foam which means you are probably using the built in viewer. That might be the issue but I'm not sure.
Can you try running paraview, navigate to your case folder, open the .foam file and see if there is still an error?
Also, if it isn't much trouble can you zip one of the time folders and attach it here? I'd like to take a look at what's inside to check against what the error report says.
Once again thanks for testing!
Kind regards,
Theodore.…
radiance parameters to get rid of blotching. To add another level of complexity to my problem, I am running simulations with a translucent material with the following properties: void trans testTrans
0
0
7 0.478 0.478 0.478 0.000 0.010 0.178 0.635
I have had no issues with the renderings when I use clear glazing, as seen on this image:
However the blotching-issue becomes very noticeable when I introduce translucent glazing into the scene:
For the two above cases I used the following parameters:
_av_ is set to 0
xScale is set to 2
_ab_ is set to 6
_dc_ is set to 0.5
_aa_ is set to 0.2
_ad_ is set to 2048
_st_ is set to 0.5
yScale is set to 2
_ps_ is set to 4
_ar_ is set to 64
_as_ is set to 2048
_ds_ is set to 0.25
_pt_ is set to 0.1
_dr_ is set to 1
_pj_ is set to 0.9
_dp_ is set to 256
_dt_ is set to 0.25
_lr_ is set to 6
_dj_ is set to 0.5
_lw_ is set to 0.01
I ran another test with increased Radiance parameters and got the following output:
with the following parameters:
_av_ is set to 0
xScale is set to 6
_ab_ is set to 6
_dc_ is set to 0.75
_aa_ is set to 0.1
_ad_ is set to 4096
_st_ is set to 0.15
yScale is set to 6
_ps_ is set to 2
_ar_ is set to 128
_as_ is set to 4096
_ds_ is set to 0.05
_pt_ is set to 0.05
_dr_ is set to 3
_pj_ is set to 0.9
_dp_ is set to 512
_dt_ is set to 0.15
_lr_ is set to 8
_dj_ is set to 0.7
_lw_ is set to 0.005
Although the second blotching case is much better than the first, it is still very bad for hours when the sun is lower in the sky. The above images are rendered for a clear sky at 18:00 in Germany in a West-facing room.
Sorry for the long post! Can someone help? Kind regards, Örn
…
the space that you are designing and your design intent. Just think about an atrium vs a museum. And now think of the atrium in two different climate zones. As a [lighting] designer you make the decision on how do you want the space to be, how the climate is and then try to take advantage of skylight and/or direct sunlight to achieve your design goals.
2. Yes. There is a watchTheSky component next to sky types which let you visualize the sky. There is also an example file that you can check.
3. This one again depends on your model. For your model I would suggest a minimum number of 4 for your final analysis. -ab is only one of the parameters. Check this slides by John Mardaljevic if you want to have a better understanding of radiance parameters and their effect on the results.
I also added the link to "Tutorial on the Use of Daysim Simulations for Sustainable Design" by Christoph Reinhart to teaching materials. I encourage you to at least read chapters 1 and 2 of the tutorial. Check pages 25 and 27 have two examples about selecting the parameters.
Great questions. Keep them coming.
Mostapha…
the space that you are designing and your design intent. Just think about an atrium vs a museum. And now think of the atrium in two different climate zones. As a [lighting] designer you make the decision on how do you want the space to be, how the climate is and then try to take advantage of skylight and/or direct sunlight to achieve your design goals.
2. Yes. There is a watchTheSky component next to sky types which let you visualize the sky. There is also an example file that you can check.
3. This one again depends on your model. For your model I would suggest a minimum number of 4 for your final analysis. -ab is only one of the parameters. Check this slides by John Mardaljevic if you want to have a better understanding of radiance parameters and their effect on the results.
I also added the link to "Tutorial on the Use of Daysim Simulations for Sustainable Design" by Christoph Reinhart to teaching materials. I encourage you to at least read chapters 1 and 2 of the tutorial. Check pages 25 and 27 have two examples about selecting the parameters.
Great questions. Keep them coming.
Mostapha…
evel in which each final branch contains a list of one number from each list in all its variations with the other two lists.
12
AB
xy
Becomes eight possible combinations:
1Ax
1Ay
1Bx
1By
2Ax
2Ay
2Bx
2By
Either I could immediately break into 8 branches or branch twice from 2 items to 4 items then from those 4 items to 8 final items. I keep trying grafting with all manner of tree components and *never* obtain a simple dual branching fractal tree structure. I barely even need a tree actually, but I'd prefer each final branch to contain a list I can pull each final value individual value out of rather than dealing with string extraction. This is all to eventually plug all these variations into a parametric mesh model that now uses three sliders, and Python script also to bake them all as OBJ files.
Crucially I also need to obtain the numbers to use as part of my multiply exported OBJ files. I can so far only get a single range to export as a series of OBJ files automatically but not the whole three list array of them.
…