eventually found out about genetic algorithms on which I found extensive researches, projects,... ! I looked into it and ended up on a few papers which I believe are the jumpstart for my master thesis.
"Galapagos; on the logic and limitations of generic solvers" by David RuttenArticle in Architectural Design 83(2) March 2013
"Black-box optimisation methods for architectural design" by Thomas Wortmann and Giacomo NanniciniConference Paper: CAADRIA 2016, At Melbourne, AU, Volume: 177-186
So I started looking into alternatives to genetic algorithms in architectural design.So far, I've ended up on :
Thomas Wortmann's work with the surrogate(or model) based optimization approach!You can check out the tool he developped for GH (Opossum):http://www.food4rhino.com/app/opossum-optimization-solver-surrogate-models
Judyta Cichocka's work, specially with the Swarm approachYou can check out the tool she developped for GH (Silvereye):http://www.food4rhino.com/app/silvereye-pso-based-solver
And that's it !!! I've been researching through article references (mainly on "researchgate") but I'm now stuck in a loop of references I already visited!That probably means the litterature on the subject is not (yet) extended but I might probably be missing something.The keywords make it difficult to search : "optimisation", "algorithms", "architecture", send me most of the time to computational engineering and deep mathematics papers I unfortunately do not have the background knowledge to comprehend ! So there it is ! If you have any clue of where (or how ! ) I should be looking, please tell me :)I know Mr Rutten is pretty active on the forum so hopefully... (fingers crossed :p) !Also if you have any good tips for getting into algorithms in general (you think could help), I'd be glad to hear(read) it ! A book, tutorials maybe ?!So, autors, architects, projects books, articles, conferences I should go to,specialized architecture offices/studios (I'm also looking for an internship so ...).If you know about a more appropriate forum please let me know !If you want to get deeper into this, you can contact me at :
e1635331@student.tuwien.ac.at
tdissaux@student.ulg.ac.be
My master thesis is due for may 2018 but I have a paper to write for January 2018 in order to be elligible for a PHD program afterwards.What I mean by that is that if you read this message in 6 month, I'll still be open to discussion !
I am right now an erasmus student at TUWien (Vienna) but my main university is The university of Liège in Belgium.I can handle French, English, Italian litterature and eventually Dutch if really you think it's worth it ! I have access to most online libraries via my university's portals so access shouldn't be an issue !I'm very excited to hear from you I wish you all a great day,Cheers,Thomas
…
onents (radiation, sunlight-hours and view analysis) which let you study the effect of the orientation of your building and the analysis result. When you come to a question similar to "what is the orientation that the building receives the most/least amount of radiation?" is probably the right time to use this component.
HOW?
I'll try to explain the steps using a simple example. Here is my design geometries. The building in the center is the building to be designed and the rest of the buildings are context. I want to see the effect of orientation on the amount of the radiation on the test building surfaces from the start of Oct. to the end of Feb. for Chicago.
First I need to set up the normal radiation analysis and run it for the building as it is right now. [I'm not going to explain how you can set up this since you can find it in the sample file (Download the sample file from here)]
Now I need to set up the parameters for orientation study using orientationStudyPar component. You can find it under the Extra tab:
At minimum I need to input the divisionAngle, and the totalAngle and set runTheStudy to True. In this case I put 45 for divisionAngle and 180 for the totalAngle which means I want the study to be run for angles 0, 45, 90, 135 and 180.
[Note1: The divisionAngle should be divisible by totalAngle.]
[Note 2: If you don't provide any point for the basePoint, the component will use the center of the geometry as the center of the rotation.]
[Note 3: You can also rotate the context with the geometry! Normally you don't have the chance to change the context to make your design work but if you got lucky the rotateContext input is for you! Set it to True. The default is set to False.]
You're all set for the orientation study, just connect the orientationStudyPar output to OrientationStudyP input in the component and wait for the result!
The component will run the study for all the orientations and preview the latest geometry. To see the result just grab a quick graph and connect it to totalRadiation. As you can see in the graph 135 is the orientation that I receive the maximum radiation. Dang!
If you want to see all the result geometries set bakeIt to True, and the result will be baked under LadyBug> RadaitionStudy>[projectname]> . The layer name starts with a number which is the totalRadiation.
Mostapha…
her people) a tremendous amount of time creating them by hand. Dog Treat was far from perfect, however it was good enough to use almost daily.
Three years is a long time. Since 2016 my Gh knowledge has expanded and I’ve seen how dodgy some of the scripting is. With this in mind I started work on a new build. Many things have been tweaked and some things have been rebuilt from the ground up.
Everything has been designed to be leaner and be a general solution to the problem of creating dog bone corners on geometry for quick, efficient and safe CNC fabrication.
Some of these things are:
Adding prompts about user geometry to make them aware about open curves, varying curve heights and if their geometry had been altered (mostly removing unnecessary points on curves).
Smooth Transfers. If you’re in a rush and need to speed through cutting, smooth transfers mean that a lead in geometry is now created alongside the actual dog bone arc. This means the router bit doesn’t have to come to a minute stop at every corner. This is turned on by default.
Acute Angle Condition If the angle between the two curves adjacent to a dog bone point is acute, previously the dog bone corner was useless. This was because the distance between the end points of the dog bone arc were less than the diameter of the router bit. There are many ways this condition could be addressed. I chose to circumscribe a larger arc based on the original angle between the adjacent curves. While it removes more material from the corner, it minimises tool wear and any potential for material to burn.
Single Curve A single curve can now be input into Dog Treat. It will be output with both internal and external treatments.
I’ll continue to update Dog Treat as the need arises, it’s become somewhat of a hobby now. Maybe one day it will become part of a Plug-in… once I learn to code it though!
Happy Treating!
Hi Everyone,
Here's a tool I've been working on for the past 4 months or so in my free time. It's a dog bone corner generator, however it's a little different to some of the existing ones. It's designed to be used for large amounts of geometry and as such, it avoids using any curve boolean operations that are computationally taxing. You don't have to split your curves up into internal and external lots either, it works it all out so you can be lazy. I've also incorporated Lunch Box's Object Bake Component for a one click operation that bakes geometry back out to Internal and External profile layers.
Let me know how it goes, will update where necessary.
Best,
Darcy
Change Log
06/11/19 - Version 2.0 SECOND DINNER - Rebuild
29/09/17 - Version 1.3 - Now with smooth corners option, True for smooth default/False for original
18/05/17 - Version 1.2 - Now includes variable angle domain input (defaults at 90°) for angled corners
13/11/16 - slight change to enable acceptance of very large interior curves
…
Added by Darcy Zelenko at 8:44pm on November 9, 2016
string may contain any number of curly bracket pairs with non-negative integers in them:
"When {0} brings back {1} days and {2}"
The number inside the brackets refers to the data to insert in that location. In effect, {x} is a placeholder for actual data. The data inserted into a specific bracket pair is the data supplied in the latter part of the function. {0} refers to the first item, {1} to the second, {2} to the third and so on ad infinitum.
If I supply some data the entire expression may look like this:
Format("When {0} brings back {1} days and {2}", "Spring", "blue", "fair")
which will result in the string "When Spring brings back blue days and fair".
If the data you're inserting is a number (or a date) then you have additional formatting flags that you can use. These additional flags appear behind the placeholder index integer separated by a colon.
Format("Pi = {0:0.00} ({0:0.000000})", Pi)
The :0.00 means the number will be formatted using two digits. The other flag will enforce six digits, resulting in: "Pi = 3.14 (3.141593)"
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
Added by David Rutten at 3:00pm on February 3, 2013
n the inability to be a real-life member within a parametric workflow (same kind of issue with Evolute Tools Pro).
As regards strictly AEC matters the main problem with GH is Rhino itself (not feature/constrain driven, not a solid modeler, not AEC oriented by any means and not biased towards assembly/component modeling). Other than that and due to the known GH inability to handle/manage blocks/nested blocks at bake time ... well... I hardly can see how "to set up work flows between different tools such as ..."
I'll post soon 5 - rather "trivial" - AEC cases that are totally undoable (shop drawing level) with anything other than CATIA (or NX).
BTW: since international practices grow and grow in numbers these days (and individuals are dead) I can't see any realistic limitation for creating dedicated teams (kinda like Frank Gerhy did) that can easily deal with the "extremely heavy" nature of the beast.
BTW: this is a job ad (Project Architect role) from one of the biggest US AEC practices (rather a corporation, he he)
How things change these days ... don't you agree?
best, Peter
…
nette for years.. but without the nice GUI. It also allows combining constraints solving to be part of the DAG.
What is parameterics? Or parametric associative as GC has been described. Can't remember. History or procedural modeling? Even constraints solving or rules based solving all use parameters. Is it generative or merely parametric? I guess the difference is a parametric door doe not generate other parameteric doors?
BIM has opened the door to a more data centric view and manipulation of the design model. To old skoolers a wall is a linear construct that can be abstracted into parameters... beginning and end points of wall in plan + height and thickness. But start adding other stuff and need to ineteroperate with others and things get problematic.
Pretty soon, all those abstractions (parametric or otherwise) need to be structured and you end up talking about schemas etc to control the format of the parameters using rules as checks or constraints..so that your parameters can interface with parameters from others without causing data quality issues. It all gets very database thinking like.
So, I would say parametrics as GH does it is more free form and ad hoc and at some point if it goes BIM, the parametrics will be need to be (re)structured..
BIM is dependent on IFC development which is not very fast. IFC4 is only beginning to think about parametrics and 'Design Transfer'.
…
humacher (Zaha Hadid) and in fact most issues of AD (Architecture Design)
The Politics of Parametricism: Digital Technologies in Architecture by Matthew Poole, which is kind of a follow up
In my opinion learning Grasshopper will be enough and there is no need to learn Python to use it successfully. Best to have a deep understanding of Grasshopper and what it can do then to try and learn too many things at once. It will help you in applying the principles to other code and not the other way round (ie. learning the concepts first and then going into grasshopper). The best way to learn the concepts is by applying and trying them in a tool like Grasshopper.
I absolutely recommend that you visit a Grasshopper workshop, as that will teach you a lot more than Youtube videos. If you cant visit a workshop, then I recommend the rese.arch video series on Grasshopper. They're really indepth and go from simple introduction to very advanced. You should ideally buy and complete all of them.
Also there is of course Dynamo and its integration with Revit and BIM, which is something to look at, although Grasshopper covers all of that as well, at least with the integration with ArchiCad. Autodesk products are more common around the world though.
Be aware that a lot of the power of Grasshopper is also in the plugins you can get for it, like Kangaroo (physics simulation), Ladybug&Honeybee (environmental analysis), Karamba (finite element analysis), Hoopsnake or Anemone (looping) and many, many more. You can find them at food4rhino.com.
Good luck!…
y case. Here's the thing. There is this subject at my university where we are assigned a famous building and we need to recreate it in Rhino. We're given bonus points if we manage to code some interesting part of it in Grasshopper. So far so good, I'm doing pretty well with Rhino and by far I am happy with the results I've achieved with modelling the given building. Harbin Opera House by MAD is the building I'm trying to model. There is one particular surface:I've built this surface in Rhino and now I'm trying to map pyramids on it. Not only have the pyramids to be different in height, but their height has to be dependent on the curvature of the surface. I'm getting some results but it seems to be exactly the opposite of what I need. I want to have higher/spikier pyramids where my curvature analysis shows red/blue and lower/slopier pyramids where the analysis shows green colour.At the moment I'm not really sure how the code I have works, but it seems that the height of the pyramids is dependent on a distance from a point in space to the projection of the cap-point of a pyramid.Here're my Rhino and Grasshopper files:surface1.3dm
surface1.ghI'd be grateful if someone of you guys could handle my problem. I've got one more issue with this surface, but once I get a solution to the first 1 will let know what the second one is.Thanks in advance and keep well!…
te some implications and questions so I will go one by one:
"Now I would like to use a single VRay material as a template for creating multiple identical materials"I hope this will work, but as VRay does not expose any SDK, I would not guarantee any specific result.
"Now I need to add them to the document material table"This is done with a reference to a document instance, such as the one you get with the code doc.Materials (both in C# and Vb.Net).
"I'm not going to learn C# to modify his script"That's a pity, it would be nice to pass on this troublemaker to somebody else! :)Btw, C# and Vb.Net are very very similar. This script could be written in Vb.Net too.
"Reference to a non-shared member requires an object reference. (line 96)"This only means that you need to access the Materials property on an instance, not on the type (class) name. Change that line using what is written at point 2.
"Do I understand that the material has to be assigned to a particular object in order to enter the Material Table?"No it does not. But if you call the _Purge command it will be removed if it does not have an object that references it.
"Can I assign it to a Layer instead?"You do not need to. But this would be achieved with doc.Layers[whichLayer].RenderMaterialIndex = materialIndex; in C# or doc.Layers(whichLayer).RenderMaterialIndex = materialIndex in Vb.Net.
"Any ideas? A better way to do this?"If you found a way to bypass the VRay SDK not being there, this should work.
"Giulio's component has a type hint defined as a Material"It does not any longer. The hint was there in earlier versions of Grasshopper, but now the hint has disappeared. This is not so bad, and it is also the only way you would be able to use either a Material instance already or a string for a material name.
"How was that done?"Probably it was done in an older version of Grasshopper. But which version are you using?
"I can't figure out how to cast the input as a Rhino.DocObjects.Material, so you can see that I have cast it as a compatible type in the first 2 lines... is there a cleaner way?"That sounds like a good way actually. Be sure your component responds properly when something wrong is inputted, though.Dim mTemp As Rhino.DocObjects.Material = CType(M, Rhino.DocObjects.Material)in one line might also work. See msdn for more conversion operators and functions.
I hope this helps,
- Giulio_______________giulio@mcneel.com…