ions are probably reflective of the prevailing humidity conditions (I just had a chat about this with my advisor, who incidentally also happens to be on the committee for LM-83).
The Tregenza sky patches considered in daylighting calculations don't do a good job of incorporating the correct size of the sun into calculations. In the figure below, the sun on the right is the one considered for calculations in Daysim. You can get a more accurate answer by considering a more discretized sky, however, I am not aware if that is possible with Daysim (and therefore HB) right now. Therefore, your direct sun calculations are likely to be off somewhat depending on how much of it there is(I'd say overestimated).
The calculations with humid sky, which are on account of the sky itself (and not the sun alone) are likely to be more relevant.
Regarding your questions about studying weathering effects with LB/HB, I have no idea as that is something that I haven't looked into before. I am sure someone else on this list has a more informed opinion on this issue than I do.
Your project, and your approach to it, seems really interesting and I am glad to be having this discussion :).
Sarith
…
p; 3D Urban ModelingOn the topography subject I get the next message: "One or more boundaries may be outside the bounds of the topo dataset" I'm not sure if it's the .IMG file I'm loading since I found so many IMG files nearing my polyline area (Miami Lat:26 Lon:-81 aprox.) or maybe my polygon doesn't match the topo area? I have no idea why it isn't working :(On the Shapefile subject, haven't been able to find a Building Height SHP File, so far have downloaded around 8 SHP files which only contain Polylines, my solution is to meanwhile randomize Z heights, but of course this data is not "technically" correct.P.S.: I've already tried all example links and also the ones posted by you and Benjamin in this video.Been strugling last few days, hope you can help me, thanks in advance!!…
try now to integrate Geco in an interdisciplinary architectural engineering studio: hoping we can show you some nice applications of your tool, I'll keep you update and sending now details by e-mail. Here the file (very welcome to be shared). It most probably contais trivial errors by me, thanks for helping and giving some tip! Gr. Michela
FILE:
Ok, right, I see the outputs update correctly. Origin of problems must be in some different mistake I do:
- Incident radiation: I am not sure I understand what is going on: why I get so many 'not a number' ? (The Galapagos report is full of NaNs).
Bio-Diversity: 0.887 Genome[0], Fitness=NaN, Genes [89% · 44%] { Record: Too many fitness values supplied } ...
Genome[7], Fitness=NaN, Genes [74%] { Record: No fitness value was supplied } ....
Genome[9], Fitness=NaN, Genes [37% · 11%] { Record: Genome was mutated to avoid collision Record: Too many fitness values supplied }
- Daylight calculations: the geometry accumulates withouth deleting the previous models. As a consequance, results almost do not change after few varations (so, outputs get updated but do not vary). In current daylight definition: the first object being imported is the one where the grid has to fit; its setting makes it cancelling all the other objects during import. All the others, do not delete anything when imported. When running loops (manual or GA) that vary parameters, the entire geometry do not get cancelled - so I guess the loop does not pass back by the cancelling step, but imports only the geometry which has been varied by the parameters using the setting of that import component only? I will then try again by changing the order of the operations, but if you have specfic tips, let me know.
THANKS!
…
Simpsons episode were Bart goes into a mall and in the time he goes in and out of a shop all others have been turned into Starbucks.
I personally don't like it but you can't say they are crushing all competitors because, as far as i know, all owners of those software packages voluntarily sold their property for a good price. I would actually be more worried that an antitrust lawsuit was filed against Autodesk.
For example, this is what happened with Rockefeller's Standard Oil:
The antitrust case against Standard Oil also seems absurd because its share of the petroleum products market had actually dropped significantly over the years. From a high of 88 percent in 1890, Standard Oil's market share had fallen to 64 percent by 1911, the year in which the US Supreme Court reaffirmed the lower court finding that Standard Oil was guilty of monopolizing the petroleum products industry.[32]
The court argued, in essence, that Standard Oil was a "large" company with many divisions, and if those divisions were in reality separate companies, there would be more competition. The court made no mention at all of the industry's economic performance; of supposed predatory pricing; of whether industry output had been restrained, as monopoly theory holds; or of any other economic factors relevant to determining harm to consumers. The mere fact that Standard Oil had organized some thirty separate divisions under one consolidated management structure (a trust) was sufficient reason to label it a monopoly and force the company to break up into a number of smaller units.
To economists, "predatory pricing" is theoretical nonsense and has no empirical validity, either.
In other words, the organizational structure that was responsible for the company's great efficiencies and decades-long price cutting and product improving was seriously damaged. Standard Oil became much less efficient as a result, to the benefit of its less efficient rivals and to the detriment of consumers.
From: http://mises.org/daily/2317
(Beware, that site is very ideologically charged)…
points within the bounds of the site boundary and use each location as an attractor point controlling a variable at each point in the grid (radius of a circle/height of a cube/colour based on a gradient etc.).This would be based on proximity to the attractor points with the effect of each attractor point essentially scaled by the percentage associated with it. For example a location with 88% visitor rates would have a more dramatic effect than a location with 26% visitor rates.
I've had a bit of a play around but can't seem to get beyond the point of what is shown in basic point attractor tutorials online. I'm definitely a novice.
Here's how I figured it would be done:
1) Create a grid of source points within a boundary curve.
2) Select 18 pre-defined attractor points.
2) Measure the distance between the source points and the attractor points.
3) Invert this data so that variables increase with proximity rather than decrease.
4) Give each of the attractor points a strength value from 1-100% based on the visitor rates.
5) Use the scaled data to control a variable at each of the source points.
6) Create some way to control the drop-off rate of the effect from each point.
It is at step 3 that I get completely lost.
I hope my description is clear. Any help would be greatly appreciated,
Adam
…
nowledge, tools, materials and machines. The Clusters provide a focus for workshop participants working together within a common framework.
Clusters provide a forum for the exchange of ideas, processes and techniques and act as a catalyst for design resolution. The Workshop is made up of ten Clusters that respond in diverse ways to the sg2012 Challenge Material Intensities. The Call for Clusters is now open to proposals which respond in innovative ways to this year's challenge.
Deadline: September 19 2011
More information can be found here:
http://smartgeometry.org/index.php?option=com_content&view=article&id=129&Itemid=146
sg2012 takes place from 19-24 March 2012 at EMPAC (http://empac.rpi.edu/) and is hosted by Rensselaer Polytechnic Institute in Troy, upstate New York USA. The Workshop and Conference will be a gathering of the global community of innovators and pioneers in the fields of architecture, design and engineering.
The event will be in two parts: a four day Workshop 19-22 March, and a public conference beginning with Talkshop 23 March, followed by a Symposium 24 March. The event follows the format of the highly successful preceding events sg2010 Barcelona and sg2011 Copenhagen.
sg2012 Challenge Material Intensities
Simulation, Energy, Environment
Imagine the design space of architecture was no longer at the scale of rooms, walls and atria, but that of cells, grains and vapour droplets. Rather than the flow of people, services, or construction schedules, the focus becomes the flow of light, vapour, molecular vibrations and growth schedules: design from the inside out.
The sg2012 challenge, Material Intensities, is intended to dissolve our notion of the built environment as inert constructions enclosing physically sealed spaces. Spaces and boundaries are abundant with vibration, fluctuating intensities, shifting gradients and flows. The materials that define them are in a continual state of becoming: a dance of energy and information.Material potential is defined by multiple properties: acoustical, chemical, electrical, environmental, magnetic, manufacturing, mechanical, optical, radiological, sensorial, and thermal. The challenge for sg2012 Material Intensities is to consider material economy when creating environments, micro-climates and contexts congenial for social interaction, activities and organisation. This challenge calls for design innovation and dialogue between disciplines and responsibilities.sg2010 Working Prototypes strove to emancipate digital design from the hard drive by moving from the virtual to the actual in wrestling with the tangible world of physical fabrication. sg2011 Building the Invisible focused on informing digital design with real world data. sg2012 Material Intensities strives to energise our digital prototypes and infuse them with material behaviour. They have the potential to become rich simulations informed by the material dynamics, chemical composition, energy flows, force fields and environmental conditions that feed back into the design process.
More information can be found at http://www.smartgeometry.org…
next level.
This Parametric Design course will provide the participants with the necessary knowledge and ability to use Grasshopper, a free visual programming plugin in Rhinoceros; you will be guided through a series of hands-on exercises that highlight NURBS modeling and its concepts. We will introduce Grasshopper as a graphical algorithm editor tightly integrated with Rhino’s 3D modeling tools. You will also learn how Rhino is used to render models for visualization, translate 3D models for prototyping, and export 3D models into 2D CAD or graphics programs.
English is the course main language.
Location: Düsseldorf city center
Registration and buying Tickets
www.digitalparametrics.eventbrite.de
Course Calendar:
4 Days 6 hours each
Total duration 24h
2 weekends
Date:
Sat. 17 - Sun. 18 June
Sat. 24 - Sun. 25 June
10:00 - 17:00
Getting Started in Rhino. 2 days (17 - 18 June)
Getting Started in Grasshopper. 2 days (24 - 25 June)
-----------------------------------------------------------------------
Participants will be given a certificate of participation at the end of the course.
-----------------------------------------------------------------------
Course fees:
Professionals: 600€ (excl. MwSt.) Students: 500€ (excl. MwSt.) Students need to provide: Copy of current student ID or proof of student enrollment at University/School.
Group discounts:
Group of 3 professionals: 3x500 = 1500€ (excl. MwSt.)
Group of 3 Students: 3x400 = 1200€ (excl. MwSt.)
Participants are kindly asked to bring their own laptops and have pre-installed Rhino + Grasshopper.
Useful Resources:
Rhinoceros Installation (90 days full version trial available): http://www.rhino3d.com/download
Rhinoceros for Mac (includes Grasshopper) http://www.rhino3d.com/download/rhino-for-mac/5/wip
Grasshopper Free Installation: http://www.grasshopper3d.com/page/download-1
Grasshopper Free Plugins: http://www.food4rhino.com/app/lunchbox http://www.giuliopiacentino.com/weaverbird
Main Tutor:
Rihan
M.A. Dipl.Ing. Architect
Architect at RKW Architektur + Düsseldorf
For any questions about the course, please email: info@immersive-studio.com…
ll geometry.
The difference with programs like Inventor is that they are made for production, regardless of the fabrication method. I won't go into detail about that, and instead focus on the modeling process.
In this little model, the starting point actually is a bit obvious, the foundation.
The only contents in the 3dm file are 27 lines. These indicate the location of each footing, and the direction of the tilt of each column. Everything else is defined in GH with the use of numbers as input parameters.
Needless to say, instead of those lines you could obviously generate lines and control the number of columns and panels, hence establish their layout, with any algorithmic or non-algorithmic criteria you please. That marks a major difference between GH and Inventor.
You can generate geometry with Inventor via scripting/customization (beyond iLogic), with transient graphics for visual feedback similar to GH's red-default previews. However Inventor's modeling functions are not set to input and output data trees. I won't go into detail on that, but suffice to say that the data tree associativity of GH was for me the first major difference I noticed. I've used other apps with node diagram interfaces like digital fusion for non-linear video editing since the late 90's, so the canvas did not call my attention when I first started using GH.
Anyways, here's a screen capture of the foundational lines:
In the first group of components, the centerlines of the rear columns are modeled:
And the locations in elevation for connection points are set. Those elevations were just numbers I copied from Excel, but you can obviously control that any way you please. I was just trying to model this quickly.
The same was done for the rear columns:
The above, believe it or not, took me the first 5 hours to get.
Here's a screen capture of what the model and definition looked like after 4 hours, not much:
If you're interested, next post I can get into the sketching part you mentioned, which is a bit cumbersome with GH, but not really.
I wouldn't say that using GH to do this little model was cumbersome, it just needed some thinking at the beginning. You do similar initial thinking when working with a feature-based modeler.…
Added by Santiago Diaz at 12:44am on February 24, 2011
ce issue with Rhino and shouldn't make an issue with EnergyPlus but just to have cleaner geometries, I untrimmed base surfaces so zones are closed brep now.
I also noticed that when you are adding multiple openings to a surface, the surface doesn't show-up in the output of createHBZoneFromHBSurfaces. The surfaces are there though and show up once you explode the zone! Again should be a tolerance issue for join. I need to take a closer look to both of these.
Also, in a number of the zones you had wall surfaces connected to createZoneFromHBSurfaces both before and after adding glazing. I removed parent surfaces so you don't end up having duplicate surfaces.
Back to adjacency which was your question, the issue happens since you have couple of zones with the same name so component was assuming them to be the same zone so it wouldn't solve the adjacency (Yes! it shouldn't. That was a bug which is fixed now). I changed the names and now it should find the surfaces that you are looking for.
Moreover, once you solve the adjacency, next solveAdjacency won't overwrite the BC unless you set remCurrentAdj to True.
Mostapha…
greatly appreciate it!!
You can write the number of the question and write your answer next to it, example:
1) a
2) c
3) a) Washington University in St. Louis
4) 2 weeks (1week+1week shipping)
5) 130
6) b
7) b
The survey questions are as follows:
1)
Did you 3D print before?
5)
How much did it cost (in dollars)?
a.
Yes, for a school project
a.
Between 20 & 50
b.
Yes, for a personal project
b.
Between 50 & 80
c.
Between 80 & 120
2)
Print size
d.
Please specify if otherwise: _____ dollars
a.
Between 2 & 6 cubic inches
b.
Between 6 & 12 cubic inches
6)
Do you think the price was expensive?
c.
Between 12 & 20 cubic inches
a.
Not at all
d.
Please specify if otherwise: ____cubic inches
b.
A little bit expensive
c.
Very expensive
3)
Where did you print your object?
a.
School
7)
Were you satisfied with the printed object?
b.
Outside school: _________________
a.
Yes, it was a great print without problems
b.
Not bad, some issues
4)
How long did it take to print?
c.
I was not satisfied, very bad quality
a.
___ days
b.
___ weeks
Thank you very much to all!!
PS: If you did many 3D prints, you can post multiple answers.
Wassef…