aching my skill set here, but bare with me.
I want to create an animated facade of squares which rotate depending on a sequence of grey-scale images. I've got pretty far thanks to many discussions here, but have hit a blank with exporting my animated model to 3ds max.
Here's my GH script - it's a botch of 3 or 4 various things incorporating centipede at the start and end to get the animation.
All good and it works! It produces animations which I can sequence for presentations too thanks to it's bmp export, which is sort of a side-product.
What I have a problem is that the OBJs it produces error wildly when imported to max. eg in rhino it looks like
But when I've imported them to max it looks like
and as it animates it just gets longer and smaller.
NOW I reckon it might be because my model in grasshopper is 100 separate geometries and it'd like it to be a single one - but I've not achieved that.
Does anyone have any ideas how to solve this? My end result I would like to look like this rendered still from max, but animated.
Thankyou all! This also uses Firefly, so you might need that installed to see how my file works.
…
Added by chris parrott at 10:34am on September 11, 2015
ectly in grasshopper (drawing a curve on top of a line with different angles), i did the curve shape in rhino and import it into grasshopper.
i'm having a problem where some of the sine curve shape can orient or map onto the triangle surfaces nicely, but some of them do not. whenever i try to orient the shape onto the bottom portion of the icosahedron, the shape becomes 'negative', forcing me to flip the lines before offsetting and patch (i am using loft method) or else it will become a weird loft (image 3).
i have tried several different ways to orient the ones that worked (orient 3d in rhino, rotate 3d etc.) and still could not get them to work.
the reason that i want them to face in the same direction is so that i can use WB thicken and make sure they extrude in the same direction. i have tried to unify the normal faces in grasshopper and still it is not working.
does anyone have any idea why or how can i do this? your help will be greatly appreciated. i am fairly a beginner in GH so if there is any other easier method to do this will also be great :)
…
ed pygeoj.py It must be in your script's folder by Karim Bahgat https://github.com/karimbahgat ----------------------------------- TODO : use something like : https://github.com/karimbahgat/PyCRS ----------------------------------- Copyright (c) 2015, Guillaume Meunier <alliages@gmail.com> GEOJSON_export is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. GEOJSON_export is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. GNU General Public License <http://www.gnu.org/licenses/>. @license GPL-3.0+ <http://spdx.org/licenses/GPL-3.0+> - Args: path: path where to export filename: filename of your JSON without its extension (GEOJSON added) using_keys: which key attributes to export, 'id' by default s_names: values of 'id' key s_keys: normally each surfaces user attributes' keys s_values: normally each surfaces user attributes' values s_vertex: vertex of each surfaces run: do the export Returns: out: various information coordiantes: coordinates in JSON format properties: properties in JSON format
VER 1.3
few bugfixes
31_5_2016
VER 1.2
create multipolygon (with holes and multiple objects)
23_3_2016
-----
VER 1.1
resolved problem with geometry check in qgis by closing completely polygon
5_1_2016
---
VER 1.0
3_12_2015
In Extra category
code is here : https://gist.github.com/Alliages/8dbfce7cdd24383342b0
…
o be used for the subsequent energy simulation by using customized csvSchedule, as shown in Fig.1.
For each lighting group, there is a separate lighting Power Density (i.e. 14.57, 14.57, 9.7619 W/m2 respectively), as show in Fig.2.
Fig.1
Fig.2
Fig.3
My question is:
What is the correct way to plug the "three lighting schedules and lighting Power Densities" to the "setEPZoneLoads" and "setEPZoneSchedules" components, making sure Energy+ can recognize and use these schedules and LPDs for calculation correctly?
As indicated by the panel in Fig.1, three csv files should be generated, but I can only see one csv file (in attachment) generated in the indicated path. It was generated based on the third branch data (i.e. the third 8760 list) of the input "tree" data, instead of the data in all three branches.
As indicated by the panel in Fig.2 and 3, there is only one LPD value (i.e. 14.57) or lighting schedule shown in the yellow panels, instead of three. Is that normal?
Thank you in advance for your kind help!
Best,
Ding…
ree-form surface or polysurface.
As mentioned in the discussion title, I would like to create a look, similar to the beijing water cube, but not on a planar surface. And also the bubbles should only be very slightly tensioned.
I have tried 3 methods, they are all in the .gh file and best result ( smoothness of bubble) gives the "extrude to point" method. The problem is, the resulting mesh borders are not even close to the original surface, because of u,v setting to 1. I want the bubbles to have the original outline as border line. I don´t know if this is even possible.
The other methods are not very satisfying. ( I tried "inflate mesh" and third method was to patch the surface and point)
If somebody took a look in the file, I would be very glad.
Also there is another problem with the offset of the voronoi curves. Depending on the offset distance, the algorythm gives bad results. I used the clipper plugin, and have currently seen also pics of lines sticking out of the offset. Is there any solution for this?
For the bubbles, I have also seen similar solutions in the forum, but don´t know how to achieve them.Here is the pic of this solution, also posted in this forum and the discussion is here:http://www.grasshopper3d.com/forum/topics/non-planar-voronoi-definition?commentId=2985220%3AComment%3A832079The result I see here, has rounded borders of the voronoi extrusion, which I would not like to get. So I hope this is enough information.thx a lot.
Merken…
nd the challenge "Building the Invisible: Informing Digital Design with Real World Data". Information about each Workshop Cluster can be found here:
Cyber GardensUse the ForceUrban FeedsSuspended DreamsInteracting with the CityAgent ConstructionAuthored SensingPerforming SkinsResponsive Acoustic SurfacingHybrid Space Structure Typologies
The SmartGeometry 2011 Workshop will take place at CITA http://cita.karch.dk/
Applications to attend the SmartGeometry 2011 Workshop in Copenhagen will close on 31st January 2011. General Conference registration will open within 1 month.
We hope to see you there!
****************************************************
Workshop 28th-31st March
Shop Talk 1 April
Symposium 2 April
Reception 2 April
These events follow the highly successful previous SG events in Barcelona 2010, San Francisco 2009, Munich 2008, New York 2007, Cambridge/London, UK 2006 and multiple preceding events.
Click here for more info...
This year's Challenge is entitled:BUILDING THE INVISIBLEInforming Digital Design with Real World Data
THE PREMISEVast streams of data offer a rich resource for designers. By incorporating external information into our design processes the autonomy of the design is challenged. User data, energy calculations, embedded sensing, material and structural simulation, human behaviour and perception, particle flows and force fields allows design to be situated and responsive. From the simulation of megacities to the solid modelling of material systems, design has the potential to be informed by the real. Design sits not separate from is environment but inhabits an ecological system, open, dynamic and interdependent, diverse, partially self-organising, adaptive, and fragile. Across scale and within time we now have the chance to instil architecture with an immanent intelligence creating new relationships between the user, the built and its ecosphere.THE OPPORTUNITYSystems theorists suggest that data is only a raw material. It can be differentiated from information, knowledge and wisdom. Understanding is multi-levelled: understanding of relations, understanding of patterns, understanding of principles. As digital designers our challenge is in harnessing the power of computation to assist us in informing our design process. Computers help us collect, manage and analyse the environment and inform us about an abundance of data. Our challenge is to use these inputs in a meaningful way to help us make better informed design decisions.THE AIMSG 2011 explores how the incorporation of real world data challenges existing design thinking. The SG 2011 workshop aim is to create physical prototypes of design systems to be exhibited in the SG2011 exhibition.
The SmartGeometry Group is a not-for-profit educational organization dedicated to the use of computational tools in architecture and engineering. SG brings professionals, academics, and industry together to explore the next generation of digital design. SG Workshops are non-platform specific, believing it is the methodology, not the tool, that matters.
…
Added by Shane Burger at 11:23am on January 6, 2011
make quad mesh usable with Kangaroo and with limited inputs parameters in order to simulate funicular structures like "Vaulted Willow" or "Pleated Inflation" from Marc Fornes and the Verymany.
Here is a first attempt script.
As inputs there are :
Lines_in, just lines, no duplicates, on XY plane could have Z values, but the algorithm works on a , on XY plane could have Z values, but the algorithm works on a flat representation.
Tolerance is used to glue lines when points are closer than tolerance
Width is the half width of the “roads” going through the network
Angle is the shape of the ends of the roads, 0° means flat end, 180° a totally rounded end
Deviation is the shift generating spikes or enabling to generate pleated geometry
N_u is the number of subdivision along the “roads”, image above with 3 subdivisions on the roads
N_u is the number of subdivision across the “roads”
Zbool if false everything is flat, if true the mesh is in 3d, best with angle = 180° or -180°
For the outputs there is the topology of the network (like Sandbox)
As outputs geometry are put on datatree, each branch represent a path on the road, above 3 paths, which are brep output.
Adding a diagonal there are now 4 paths so 4 branches
The mesh M goes with F which are fixed points, anchor in Kangaroo.
U and V are lines in datatree, there will be used as spring in Kangaroo, U above
This script could be used to draw sort of roads, like in here https://codequotidien.wordpress.com/2013/03/22/hemfunction/
But the primary purpose is to do that.
…
looked at autodesk simulation cfd 2015 and was optimistic because it had an export plugin from revit, which i use anyway for material takeoffs and etc, but found that it did not take solar radiation into account. This was a downer because I have heard that solar radiation could effect indoor airflow - convection - as much as 50 percent at a time.
Then I searched again and found that Hyperworks, a software by altair technology can be coupled with a radiation software. So I went through the trouble of obtaining an educational license of Hyperworks. However, though some email exchange I have found that the coupling is a one-way. The radiation analysis software was used, I think, for understanding the solar loading for a SOM project called church of light.
The support guy said : "Unfortunately our coupling with Hyperworks is really a one way coupling. We can accept H coefficients from their software in RadTherm, but they will not read in our wall temps. That said, it still can be a useful coupling in the sense that you can run the analysis in Hyperworks, send H coefficients to RadTherm, and run the analysis to better understand radiation and conduction. Most importantly, that analysis can be done for longer transient analysis, but will require much less compute time and resources."
Not only did I not understand what he means by the H coefficients, my wanting to get a CFD understanding coupled with solar radiation was again, unsatisfied. In the mean while I had to finish a presentation so I haven't had the time to try to get some result on the natural ventilation. I would probably need to look into how their solutions work before I can understand if their software would "do the job"
Thank you for letting me know about your work on this. I downloaded the Honeybee_Set EP Natural Ventilation component and made sure that it is allowed, but it does not show up in grasshopper.
You pointed out that "The component (and the corresponding equation) is mostly meant for cases where you have zones with windows that are NOT connected by an air wall (or a larger airflow network)." I wondered if you are suggesting it would be a code violation for zones to be connected by an air wall for fire safety reasons. It would be a violation I guess, like not putting an fiber insulation or some kind of smoke stop between Spandrel panels and the edge of a floor plate would be a code violation for a typical office building.
There is a project by kevin daly architects where you can see a section drawing with what seems like a cfd analysis (could be an illustration)
it was my initial visualization/simulation goals were for a facade design I am working on
1) an average air velocity across a zone at noon, for example, if a passive design strategy like this was used. for this I am guessing cfd is not entirely necessary. probably means that it could be used earlier in a design process, too. This would be more about user comfort.
2) at a later phase, like in detailing facade components, if airflow is indeed as expected for a zone that is connected to an air wall / chimney like feature (and to see if there is a proper mixing of air)
3) and a projection of energy savings, of course.
After seeing a video of simulation cfd I was optimistic, but like I said sim cfd does not take account of solar loading. I think I would probably go ahead start with one zone with sim cfd first, try three zones stacked on top of each other, then try hyperworks and try to factor in solar radiation.
For analyzing multiple zones on different levels, being able to add a chimney would be especially useful, I think. Having said that, I don't have a lot of experience of using honeybee except for the daylight component so it would take some time for me to understand the components.
I hope some of the information here is useful for you. after all, both sim cfd and hyperworks are commercial softwares and somewhat different than the e plus project you are working on, I guess but still trying to address a similar problem.
so.. in cased you missed it I was asking I downloaded the Honeybee_Set EP Natural Ventilation component and made sure that it is allowed and placed in the user object foler, but it does not show up in grasshopper. what could be the reason?
…
option, after downloading check if .ghuser files are blocked (right click -> "Properties" and select "Unblock"). Then paste them in File->Special Folders->User Object Folder. You can download the example files from here. They act in similar way, Ladybug Photovoltaics components do: we pick a surface, and get an answer to a question: "How much thermal energy, for a certain number of persons can my roof, building facade... generate if I would populate them with Solar Water Heating collectors"? This information can then be used to cover domestic hot water, space heating or space cooling loads:
Components enable setting specific details of the system, or using simplified ones. They cover analysis of domestic hot water load, final performance of the SWH system, its embodied energy, energy value, consumption, emissions... And finding optimal system and storage size. By Dr. Chengchu Yan and Djordje Spasic, with invaluable support of Dr. Willian Beckman, Dr. Jason M. Keith, Jeff Maguire, Nicolas DiOrio, Niraj Palsule, Sargon George Ishaya and Craig Christensen. Hope you will enjoy using the components! References: 1) Calculation of delivered energy: Solar Engineering of Thermal Processes, John Wiley and Sons, J. Duffie, W. Beckman, 4th ed., 2013. Technical Manual for the SAM Solar Water Heating Model, NREL, N. DiOrio, C. Christensen, J. Burch, A. Dobos, 2014. A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015
2) Domestic hot water load: Modeling patterns of hot water use in households, Ernest Orlando Lawrence Berkeley National Laboratory; Lutz, Liu, McMahon, Dunham, Shown, McGrue; Nov 1996. ASHRAE 2003 Applications Handbook (SI), Chapter 49, Service water heating
3) Mains water temperature Residential alternative calculation method reference manual, California energy commission, June 2013. Development of an Energy Savings Benchmark for All Residential End-Uses, NREL, August 2004. Solar water heating project analysis chapter, Minister of Natural Resources Canada, 2004.
4) Pipe diameters and pump power: Planning & Installing Solar Thermal Systems, Earthscan, 2nd edition
5) Sun postion and POA irradiance, the same as for Ladybug Photovoltaics (Michalsky (1988), diffuse irradiance by Perez (1990), ground reflected irradiance by Liu, Jordan (1963))
6) Optimal system and storage tank size: A simplified method for optimal design of solar water heating systems based on life-cycle energy analysis, Renewable Energy journal, Yan, Wang, Ma, Shi, Vol 74, Feb 2015.…
e chosen to dive into Grasshopper. I’m about 6 months in. If some of my comments are completely off, please take that to mean that a feature is too inaccessible to a newish user rather that it’s just missing, as I may have stated.
One of my primary pain points is this. Things that can be done in other programs are invariably easier in other programs. This is a big enough issue that I doubt there’s an easy solution that an armchair qb like myself can offer up.
The interface:
I’ve used a lot of 3D programs. I’ve never encountered one as difficult as grasshopper. What in other programs is a dialog box, is 8 or 10 components strung together in grasshopper. The wisdom for this I often hear among the grasshopper community is that this allows for parametric design. Yet PTC (Parametric Technology Corp.) has been doing parametric design software since 1985 and has a far cleaner and more intuitive interface. So does SolidWorks, Inventor, CATIA, NX, and a bunch of others.
In the early 2000's, when parametric design software was all the rage, McNeel stated quite strongly the Rhino would remain a direct modeler and would not become a parametric modeler. Trends come. Trends go. And the industry has been swinging back to direct modeling. So McNeel’s decision was probably ok. But I have to wonder if part of McNeel’s reluctance to incorporate some of the tried and proven ideas of other parametric packages doesn't have roots in their earlier declaration to not incorporate parametrics.
A Visual Programming Language:
I read a lot about the awesomeness and flexibility of Grasshopper being a visual programming language. Let’s be clear, this is DOS era speak. I believe GH should continue to have the ability to be extended and massaged with code, as most design programs do. But as long as this is front and center, GH will remain out of reach to the average designer.
Context sensitivity:
There is no reason a program in 2014 should allow me to make decisions that will not work. For example, if a component input is in all cases incompatible with another component's output, I shouldn't be able to connect them.
Sliders:
I hate sliders. I understand them, but I hate ‘em. I think they should be optional. Ya, I know I can r-click on the N of a component and set the integer. It’s a pain, and it gives no feedback. The “N” should turn into the number if set. AAAnd, sliders should be context sensitive. I like that the name of a slider changes when I plug it into something. But if I plug it into something that'll only accept a 1, a 2, or a 3, that slider should self set accordingly. I shouldn't be able to plug in a “50” and have everything after turn red.
Components:
Give components a little “+” or a drawer on the bottom or something that by clicking, opens the component into something akin to a dialog box. This should give access to all of the variables in the component. I shouldn't have to r-click on each thing on a component to do all of the settings.
And this item I’m guessing on. I’m not yet good enough at GH to know if this may have adverse effects. Reverse, Flatten, Graft, etc.; could these be context sensitive? Could some of these items disappear if they are contextually inappropriate or gray out if they're unlikely?
Tighter integration with Rhino:
I'm not entirely certain what this would look like. Currently my work flow entails baking, making a few Rhino edits, and reinserting into GH. I question the whole baking thing, btw. Why isn't it just live geometry? That’s how other parametric apps work. Maybe add more Rhino functionality to GH. GH has no 3D offset. I have to bake, offsetserf, and reinsert the geometry. I’m currently looking at the “Geometry Cache” and “Geometry Pipeline” components to see if they help. But I haven't been able to figure it out. Which leads me to:
Update all of the documentation:
I'm guessing this is an in process thing and you're working toward rolling GH from 0.9.00075 to 1.0. GH was being updated nearly weekly earlier this year. Then it suddenly stopped. If we're talking weeks before a full release, so be it. But if we're looking at something longer, a documentation update would help a lot. Geometry Cache and Geometry Pipeline’s help still read “This is the autogenerated help topic for this object. Developers: override the HtmlHelp_Source() function in the base class to provide custom help.” This does not help. And the Grasshopper Primer 2nd Ed. was written for GH 0.60007.
Grasshopper is fundamentally a 2D program:
I know you'll disagree completely, but I'm sticking to this. How else could an omission like offsetsurf happen? Pretty much every 3D program in existence has this. I’m sure I can probably figure out how to deconstruct the breps, join the curves, loft, trim, and so forth. But does writing an algorithm to do what all other 3D programs do with a dialog box seem reasonable? I'm sure if you go command by command you'll find a ton on such things.
If you look at the vast majority of things done in GH, you'll note that they're mostly either flat or a fundamentally 2D pattern on a warped surface.
I've been working on a part that is a 3D voronoi trimmed to a 3D model. I've been trying to turn the trimmed voronoi into legitimate geometry for over a month without success.
http://www.grasshopper3d.com/profiles/blogs/question-voronoi-3d-continued
I’ve researched it enough to have found many others have had the exact same problem and have not solved it. It’s really not that conceptually difficult. But GH lacks the tools.
Make screen organization easier:
I have a touch of OCD, and I like my GH layout to flow neatly. Allow input/output nodes to be re-ordered. This will allow a reduction in crossed wires. Make the wire positions a bit more editable. I sometimes use a geometry component as a wire anchor to clean things up. Being able to grab a wire and pull it out of the way would be kinda nice.
I think GH has some awesome abilities. I also think accessing those abilities could be significantly easier.
~p…