And (b=y) And (c=x), "A4",If(a=x) And (b=y) And (c=y), "A3",If((a=y) And (b=x) And (c=y), "B1",If((a=y) And (b=y) And (c=x), "B3",If((a=y) And (b=y) And (c=y), "B2","Erreur"))))))
…
are the final stage of the Wetlands regeneration that will add over 30 hectares of marsh habitat to the reserve. The studio is honoured to have been be part of the project, and the fantastic work done by Environment Agency, BAM Nuttal and Mott Macdonald.
Seal Hide Design
Greatham Creek is known for its growing population of Seals, (Harbour and Grey Seals). The location of the Seal Hide looks over a favoured haul-out location for the Harbour seals. Up to 98 seals have been counted moulting on the sand banks at high tide.
The Hide design is a bold icon to represent this ambitious regeneration project. Aiming to appeal to both the serious enthusiasts while also attracting casual visitors. A functional sculpture.
Abstract Machines
Abstract Machines is an experimental design studio, that explores fabrication through innovative computational design methodologies and CAD/CAM technologies. These ideas are explored through a mix of academic teaching and live projects. The studio has taught a specialist architecture unit on the Masters course at Leeds Beckett for six years. Student involvement is a core tenet, offering a range of experiences; from design through fabrication to construction. Abstract Machines Studio is led by Architects Keith Andrews, Jak Drinnan and Nick Tyrer.
www.abstractmachines.co.uk…
ty lots as extrusions with their height depending on perimeter length. Then I added a 'Cull Duplicates' group to avoid properties that had duplicate 'Area' centroid points. That reduced the number of properties from 364 down to 331, though five of those have 'Area' values between 88 and 205, ten have values less than 500 while the average is ~1.3 million!
So the data is still suspect. Some appear to be nested inside of others? But using those 331 properties, I now find 32 that intersect the 'Zoning Districts'. But that's not the same as a list of properties that span two or more 'Zoning Districts'... Not having fun anymore. :)
…
Added by Joseph Oster at 10:40am on January 14, 2016
ts. Ideally, I'd like to set the exact number of points populating the region, ie 211 in GH = 211 visible in rhino.
(I was able to achieve the exact number of points using populate2d instead of sdivide, but could only get this to work with a simple rectangular region)
2) After I have exactly 211 points, I'd like to populate each of the points with a block made in rhino (for example: the stick figure man seen in the view)
(One idea is that I build a dummy geometry and replace later with my block in rhino. But how do I make this change universally over the 211 points?)
…
up structural systems in the parametric environment of Grasshopper. Participants will be guided through the basics of analysing and interpreting structural models, to optimisation processes and how to integrate Karamba3D into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba3D however advanced users are also encouraged to apply. It is open to both professional and academic users.
Earlybird (until May 10):
Professional EUR 750 (+VAT)
Educational EUR 375 (+VAT)
Course Fee:
Professional EUR 825 (+VAT)
Educational EUR 415 (+VAT)
Course Outline
Introduction & Presentation of project examples
Optimization of cross sections of line based and surface based elements
Geometric Optimization
Topological Optimization
Structural Performance Informed Form Finding
Understanding analysis algorithms embedded in Karamba and visualising results
Complex Workflow processes in Rhino3d, Grasshopper3d and Karamba3d
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 places are required for the workshop to take place.
The workshop will be cancelled should this quota not be filled by May 31st.
The workshop will be taught in English. Basic Rhino and Grasshopper knowledge is recommended. No knowledge of Karamba3D is needed.
Participants should bring their own laptops with either Rhino5/Rhino6 and Grasshopper3d installed. A 90 day trial version of Rhino can be downloaded from Rhino3d.
Karamba3D ½ year licenses for non-commercial use will be provided to all participants.
…
e and i get it. If you have time check the attached papers we published a while ago in relation to the contribution of thermal mass in the reduction of temperature in residential buildings. See the nice contribution of the heavy TM or the lower one for light TM.
As for the solarHeatCapacity, your description (of the 50W) is derived on a 1 Facade/Floor ratio and fully glazed. The only way to reduce it is to increase the ratio (bigger facade area). Which is not recommended (energy losses), but this is a different issue. So, roughly, we can say that 50 is the lower value. If i have less glazing area this number will be higher (right?)
I want to define a value list of "architectural situations", so it is easy to explain and understand. One situation can be:
"Ratio facade/floor 1 & Fully glazed" = 50
"Ratio facade/floor 1 & Half glazed" = 75
"Ratio facade/floor 1.5 & Fully glazed" = 30
"Ratio facade/floor 1.5 & Half glazed" = 50
"Ratio facade/floor 0.75 & Fully glazed" = 70
"Ratio facade/floor 0.75 & Half glazed" = 90
Makes sense for you something like this?
I also defined a value list for the timeConstant like this:
Light Building (Mobile home) = 1Medium-light building (Cement tiles on floor) = 4Semi Heavy Building (Concrete floor + Tiles) = 8Heavy Building (Concrete floors/ceilings + Heavy external and internal walls) = 12
As for the first 5-10 cm effective TM in general my assumption is that you take half of the mass to your space and half to the space above/below you. Will be interesting to do a parametric study on just the thermal mass, uninsulated and insulated to see what the depth limits effectivity will be. Interested in doing such a study together? Can be a nice work even for publishing.
Thanks a lot ... again,
-A.…
393&xg_source=activity
In this case we see a geometrically approach, which doesn’t works efficient, because it required knowing how they behaviors together before, and I think it is not the ‘really behaves’.
To make the structure ‘really behaves’ I tried use kangaroo and the result works very well! As you can see I simply give the 2-set reverse UForce, and then they start to rotate until they found their equilibrium. That means 90 degree rotation. I was wondering what we can do to make a endless-rotation. I am mean 360 degree or more like this:
https://www.youtube.com/watch?v=4owFczeqqMQ
By the way, I try to give supports which allow a horizontal movement only (Just curious how we could keep the anchor-movement horizontally and in the same layer, for example like usual supports for compression ring…). I use the AnchorXYZ, but Kangaroo-Engine seems don’t accept its output.
So maybe some one knows a better solution?
…
Added by Jon to Kangaroo at 7:40am on March 11, 2014
problem later) to fit more shapes that are otherwise won't fit in.
On the example below horizontal rectangle couldn't fit in but its rotated analog could and thus was placed in.
Later, when placed shapes are used to generate frames, because of this rotation, the position of the starting points changes and because of the approach I use to generate the frames some angle values are attached to the wrong corners, this brakes the frame shape and looks like this (on the left the frame of sick shape and on the right the frame of the healthy shape):
Again, this happens because the angle values are assigned to the specific corners (points) and previously rotated shapes get these all messed up:
Easy fix, don't rotate the shapes, problem is, I've already baked a good number of them for later use. I'd like to avoid regeneration because it takes a lot of time and without rotation I constrict the algorithm even more.
Better fix, use a different approach, this is where I'd like to hear suggestions and kicks in a right direction. Please take a look at my definition. It works but I have a feeling like giving an amputee a job of sweeping the floor.
…
Profesor de Proyectos Francisco Arqués Soler, experto en la materia; Una vez exploradas y programadas las decisiones generativas del proyecto, el grupo servirá de laboratorio para investigar mutaciones del mismo.
http://dpa-etsam.com/iam/iam-cursos
https://www.facebook.com/iamadridETSAM?fref=ts
Trabajaremos en la plataforma de programación visual Grasshopper, reventaremos los principios de su estructura (mediante Millipede , exploraremos las condiciones bioclimáticas (mediante Ladybug+Honeybeey navegaremos por procesos de form finding y variaciones generativas (mediante Galapagos y Octopus y su conversión a BIM (mediante Chamaleon, Lyrebird, Visualarq, puesto que el dia final programaremos la salida del prototipo a Revit).
NOTA: el curso tendra lugar la segunda mitad de este OCTUBRE, aunque el CALENDARIO aun esta abierto de manera asamblearia al maravilloso grupo reducido de elegidos que se apunten al final, aunque suele ser MARTES Y JUEVES, DE 16:00 A 18:00 HORAS.
Título Oficial de Experto en Programacion Visual por la UPM, y los creditos respectivos (en este caso 2,5)
iAM | Instituto de Arquitectura de Madrid <iamadrid.arquitectura@upm.es> +34 91 336 6537 / 6589…