ion, extract structural data, produce 2d drawings, and exchange data with other external software. Nemo also includes free tools to create parametric shapes, such as Naca profiles, hydrofoils, keels, rudders, blade propellers, and sail plans.
Born in 2018 as an academic research project at ENSTA Bretagne, Nemo grew up since, immersed in professional naval architecture practice with L2Onaval.
From 2021, Nemo is now available for purchase with commercial or educational licenses. Following license levels are provided to fit every needs depending of user activity :
Free (Designer)
Level 1 (Section + Hydrostatics + Visualization)
Level 1 + 2 (Section + Hydrostatics + Visualization + Resistance + Structure)
We can also help you make best use of our software, provide project guidance, establish specific workflow and create custom tools.
Requirements
Microsoft Windows 10 or Apple Mac OS 12 Monterey :
McNeel Rhinoceros 7 SR26
(Other Rhinoceros, Windows and Mac OS versions have not been tested but may work)
Additional info
Food4Rhino Download
Discourse Forum
Facebook Page
Linkedin Page
Nemo Website
Credits
Authors : Mathieu VENOT
Contributors : Paul POINET, Laurent DELRIEU
…
ace Syntax." eCAADe 2013 18 (2013): 357.
http://www.sss9.or.kr/paperpdf/mmd/sss9_2013_ref048_p.pdf
The measure Entropy is newer. I hereby explain it (from my PhD dissertation):
Entropy values, as described in (Hillier & Hanson, The Social Logic of Space, 1984) and specified in (Turner A. , “Depthmap: A Program to Perform Visibility Graph Analysis, 2007), intuitively describe the difficulty of getting to other spaces from a certain space. In other words, the higher the entropy value, the more difficult it is to reach other spaces from that space and vice-versa. We compute the spatial entropy of the node as using the point depth set:
(11)
“The term is the maximum depth from vertex and is the frequency of point depth *d* from the vertex” (ibid). Technically, we compute it using the function below, which itself uses some outputs and by-products from previous calculations:
Algorithm 4: Entropy Computation
Given the graph (adjacency lists), Depths as List of List of integer, DepthMap as Dictionary of integer
Initialize Entropies as List(double)
For node as integer in range [0, |V|)
integer How_Many_of_D=0
double S_node=0
For depth as integer in range [1, Depths[node].Max()]
How_Many_of_D=DepthMap.Branch[(node,depth)].Count
double frequency= How_Many_of_D/|V|
S_node = S_node - frequency * Math.Log(frequency, 2)
Next
Entropies [node] = S_node
Next
…
occur more than once in the same list, and different elements with identical values can occur more than once. Also, a list may contain lack of elements, referred to as "nulls".
Sets. Strictly speaking a Set is a mathematical construct which adheres to a strict collection of rules and limitations. Basically, a Set is the same as a List, with the exception that it cannot contain the same element more than once, or indeed two or more different elements with the same values. You see, in mathematics there is no difference between a value and an instance of that value, they are the same thing. In programming however it is possible to store the number 7 in more than one spot in the RAM. Grasshopper does not enforce this rule very strongly though, you can use a lot of Set components on lists that have multiple occurrences of the same value. The big difference between Lists and Sets in Grasshopper is that Sets are only defined for simple data types that have trivial equality comparisons. Basically: booleans, integers, numbers, complex numbers, strings, points, vectors, colours and intervals. Lists can contain all kinds of data.
Strings. Strings are text. There's nothing more to it. I don't know why early programmers chose to call them strings, but I suppose it's a better description of the memory representation of them. Strings are essentially sequences of individual characters.
Trees. Trees are the way all data is stored in Grasshopper. Even when you only have a single item, it will still be stored in a tree. A tree is a sorted collection of lists, where each list is identified by a path. A specific path can only occur once in a tree, when you merge two trees together, lists with identical paths are appended to each other. Trees are an attempt to losslessly represent not just the data itself, but also the history of that data. Imagine you have 4 curves {A,B,C,D} and you divide each into 3 points {X,Y,Z}. Then, for each of those points you create a new line segment {X',Y',Z'} and then divide each of those line segments again into 5 points each {K,L,M,N,O}. The way data is stored in trees, it should be possible to figure out whether a point M belongs to X' or to Z', and whether that X' or Z' came from A, B, C or D. This is why paths are often quite long after a while, because they encode a lot of history.
Paths. A Path is nothing more than a list of integers. It's denoted using curly brackets and semi-colons: {A;B;...;Z}. A Path should never be empty {} or have negative integers {0;-1}, but it is certainly possible to create a path like this and it probably won't even crash Grasshopper. Paths are 'grown' by components that (potentially) create more than one output value for a single input value. For example Divide Curve. It creates N points for every single input curve. In cases like this a new integer is appended to the end of the path.
In the next release the Path logic in Grasshopper is somewhat different. I fixed a number of obscure bugs (hopefully without introducing new fresh bugs) and special cased certain operations to somewhat reduce the speed at which paths grow. This may well break files that rely on a specific tree layout, but I hope the temporary sacrifice will be worth the long-term benefits.
--
David Rutten
david@mcneel.com
Poprad, Slovakia…
http://www.pilkington.com/) dominates the planar market. Charges "around" 1K Euros per m2 for a "plain" system. Personally in bespoke projects I design my own stuff but due to economies of scale ... they cost a bit more (but they look far more sexier, he he) . On the other hand only in a bespoke project I could dare to suggest such a solution (for a large scale building we are talking lots and lots of dollars).
3. Several scales below (aesthetics) you can find static alu systems (either structural or semi-structural):
Or hinged systems (either structural or semi-structural) capable to adapt in contemporary double curvature facades/roofs/envelopes/cats/dogs etc etc ... pioneered worldwide many years ago by my best friend Stefanos Tampakakis (everybody in UAE knows that genius man: http://www.alustet.gr/company.html):
4. With the exception of some paranoid things that Guru Stefanos does for Zaha these days we are talking about planar "facets" (obviously a triangle is such a planar facet). The current trend is: the more edges the better (humans excel in vanity matters). But achieving planarity in, say, quads (like yours) it adds another "restriction" on what you are doing. Until recently Evolute Tools Pro was the only answer. But right now ... well let's say that in short time you'll be greatly surprised by some WOW things in this Noble Forum, he he.
5. MERO (and obviously custom systems) can adapt (at almost no extra charge) in anything imaginable. But in a bespoke building ... well.. you know ultra rich people: they don't want MERO anymore since "everybody" does MERO solutions. Vanity, what else?
6. Smart Glass would become a must in the years to come: Eco-Architecture MUST dominate everything you do. On the other hand spending millions to do some extra WOW stuff (Vanity) ... it doesn't look to me very Eco-Friendly/Whatever ... but let's pretend so, he he.
7. I'm Architect but a bit different from the norm: for instance I smoke cigars (highly politically incorrect stuff) I always talk openly (ditto) and I ride lethal bikes (ditto).
may the Force (as always the Dark Option) be with you: go out there and kill them all.
best, Peter
…
Introduction to Grasshopper Videos by David Rutten.
Wondering how to get started with Grasshopper? Look no further. Spend an some time with the creator of Grasshopper, David Rutten, to learn the
onsidered period.
Even if the end of July for the mediterranean climate is not the best period to perform an adaptive comfort analysis (it's just a pretest to define a LB model) I want to refine the Adaptive comfort Chart (AC) by changing the external air temperature data imported from the .epw file with that of monitored data as reported here below:
Where the monitored ext air temperature are in this form (green panel below):
I have used the comfortPar component to set the following parameters:
Adaptive chart as defined by EN 15251
90% of occupants comfortable
the prevailing outdoor temperature from a weighted running mean of the last week
fully conditioned space (even if it is not properly in line with AC as already discussed)
The question is this: the AC component could correctly apply the code below if there is only a list of external temperature data for a restricted period (without indication about the limits of this period) and not for an entire year?
else: #Calculate a running mean temperature. alpha = 0.8 divisor = 1 + alpha + math.pow(alpha,2) + math.pow(alpha,3) + math.pow(alpha,4) + math.pow(alpha,5) dividend = (sum(_prevailingOutdoorTemp[-24:-1] + [_prevailingOutdoorTemp[-1]])/24) + (alpha*(sum(_prevailingOutdoorTemp[-48:-24])/24)) + (math.pow(alpha,2)*(sum(_prevailingOutdoorTemp[-72:-48])/24)) + (math.pow(alpha,3)*(sum(_prevailingOutdoorTemp[-96:-72])/24)) + (math.pow(alpha,4)*(sum(_prevailingOutdoorTemp[-120:-96])/24)) + (math.pow(alpha,5)*(sum(_prevailingOutdoorTemp[-144:-120])/24)) startingTemp = dividend/divisor if startingTemp < 10: coldTimes.append(0) outdoorTemp = _prevailingOutdoorTemp[7:] startingMean = sum(outdoorTemp[:24])/24 dailyRunMeans = [startingTemp] dailyMeans = [startingMean] prevailTemp.extend(duplicateData([startingTemp], 24)) startHour = 24
…
nd improvements. Many of the new features and components announced in the last release have become stable and have emerged from their WIP section. Additionally, after two years of work, we are happy to announce that we finally have full support of an OpenStudio connection within Honeybee, which has ushered in a whole host of new features, notably the modelling of detailed HVAC systems. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
LADYBUG
1 - Solar Hot Water Components Out of WIP
After much beta-testing, bug-fixing, and general development, all of the Photovoltaic and Solar Hot Water components are now fully out of WIP! The main component is based on a Chengchu Yan's publication. Components have been added to Ladybug thanks to the efforts of Chengchu Yan and Djordje Spasic.. See Djorje’s original release post of the solar hot water components for more information on the components that just made it out of WIP.
2 - New Terrain Shading Mask Released in WIP
In addition to Djordje’s prolific addition of renewable energy components, he has also contributed a widely-useful component to generate terrain shading masks, which account for the shading of surrounding mountains/terrain in simulations. While initially added to assist the solar radiation radiation and renewable energy components, the component will undergo development to optimize it for energy and daylight simulations over the next few months. Another new component called Horizon Angles can be used to visualize and export horizon angles. You can test them out now by accessing them in the WIP section. For more information, see Djordje’s release post on the GH forum here.
3 - New Mesh Selector Component
After realizing that the Optimal Shade Creator component has applications to a whole range of analyses, it has now been re-branded as the Mesh Selector and has been optimized to work easily with these many analyses. Specifically, the component selects out the portion of a mesh that meets a given threshold. This can be the portion of a shade benefit analysis meeting a certain level of shade desirability, the portion of a radiation study meeting a certain level of fulx, the portion of a daylight analysis meeting a certain lux threshold, and much more!
4 - Solar Adjusted Temperature Now Includes Long Wave Radiation
Thanks to a question asked by Aymeric and a number of clarifications made by Djordje Spasic, the Solar Adjusted Temperature component now includes the ability to account for long-wave radiative loss to the sky in addition to it original capability to account for short wave radiation from the sun. As such, the component now includes all capabilities of similar outdoor comfort tools such as RayMan. The addition of this capability is also paralleled by the addition of a new horizontalInfraredRadiation output on the ImportEPW component. See the updated solar adjusted example file hereto see how to use the component properly.
5 - Support for both Log and Power Law Wind Profiles
In preparation for the future release of the Butterfly CFD-modelling insect, the Ladybug Wind Profile component now includes the option of either power law or log law wind profiles, which are both used extensively in CFD studies. Thanks goes to Theodoros Galanos for providing the formulas!
6 - New Radiant Asymmetry Comfort Components
Prompted by a suggestion from Christian Kongsgaard, Ladybug now includes components to calculate radiant asymmetry discomfort! For examples of how to use the components see this example file for spatial analysis of radiant asymmetry discomfort and this example for temporal analysis.
7 - Pedestrian Wind Comfort Component Released in WIP
In preparation for the impending release of the butterfly CFD-modelling insect, Djordje Spasic with assistance from Liam Harrington has contributed a component to evaluate outdoor discomfort and pedestrian safety. The component identifies if certain areas around the building are suitable for sitting, building entrances-exits, window shopping... based on its wind microclimate. Dangerous areas due to high wind speeds are also identified.You can check it out now in the WIP section.
HONEYBEE
1 - New HVAC Systems and Full OpenStudio Support
After a significant amount of development on the part of the OpenStudio team and two years of effort on the part of LB+HB developers, we (finally!) have full support for an OpenStudio connection within Honeybee. By this, we mean that any energy simulation property that can be assigned to a HBZone will be taken into account in the simulation run by the OpenStudio component. The connection to OpenStudio has brought with it several new capabilities. Most notably, you can now assign full HVAC systems and receive energy results in units of electricity and fuel instead of simple heating and cooling loads. This Honeybee release includes 14 built-in HVAC template systems that can be assigned to the zones, each of which can be customized:
0. Ideal Air Loads 1. PTAC | Residential 2. PTHP | Residential 3. Packaged Single Zone - AC 4. Packaged Single Zone - HP 5. Packaged VAV w/ Reheat 6. Packaged VAV w/ PFP Boxes 7. VAV w/ Reheat 8. VAV w/ PFP Boxes 9. Warm Air Furnace - Gas Fired 10.Warm Air Furnace - Electric 11.Fan Coil Units + DOAS 12.Active Chilled Beams + DOAS 13.Radiant Floors + DOAS 14.VRF + DOAS
Systems 1-10 are ASHRAE Baseline systems that represent much of what has been added to building stock over the last few decades while systems 11-14 are systems that are commonly being installed today to reduce energy use. Here is an example file showing how to assign these systems in Honeybee and interpret the results and here is an example showing how to customize the HVAC system specifications to a wide variety of cases. To run the file, you will need to have OpenStudio installed and you can download and install OpenStudio from here.
In addition to these template systems within Honeybee, the OpenStudio interface includes hundreds of HVAC components to build your own custom HVAC systems. OpenStudio also has a growing number of user-contributed HVAC system templates that have been integrated into a set of scripts called "Measures" that you can apply to your OpenStudio model within the OpenStudio interface. You can find these system templates by searching for them in the building components library. Here is a good tutorial video on how to apply measures to your model within the OpenStudio interface. Honeybee includes a component that runs these measures from Grasshopper (without having to use the OpenStudio interface), which you can see a demo video of here. However, this component is currently in WIP as OpenStudio team is still tweaking the file structure of measures and it is fairly safe to estimate that, by the next stable release of Honeybee, we will have full support of OpenStudio measures within GH.
2 - Phasing Out IDF Exporter
With the connection to OpenStudio now fully established, this release marks the start of a transition away from exporting directly to EnergyPlus and the beginning of Honeybee development that capitalizes on OpenStudio’s development. As such THIS WILL BE THE LAST STABLE RELEASE THAT INCLUDES THE HONEYBEE_RUN ENERGY SIMULATION COMPONENT.
The Export to OpenStudio component currently does everything that the Run Energy Simulation component does and, as such, it is intended that all GH definitions using the Run Energy Simulation component should replace it with the OpenStudio component. You can use the same Read EP Result components to import the results from the OpenStudio component and you can also use the same Energy Sim Par/Generate EP Output components to customize the parameters of the simulation. The only effective difference between the two components is that the OpenStudio component enables the modeling of HVAC and exports the HBZones to an .osm file before converting it to an EnergyPlus .idf.
For the sake of complete clarity, we should state that OpenStudio is simply an interface for EnergyPlus and, as such, the same calculation engine is under the hood of both the Export to OpenStudio component and the Run Energy Simulation component. At present, you should get matching energy simulation results between the Run Energy Simulation component and a run of the same zones with the OpenStudio component (using an ideal air system HVAC).
All of this is to say that you should convert your GH definitions that use the Run Energy Simulation component to have the OpenStudio component and this release is the best time to do it (while the two components are supported equally). Additionally, with this version of Honeybee you will no longer need to install EnergyPlus before using Honeybee and you will only need to install OpenStudio (which includes EnergyPlus in the install).
3 - New Schedule Generation Components
Thanks to the efforts of Antonello Di Nunzio, we now have 2 new components that ease the creation of schedule-generation in Honeybee. The new components make use of the native Grasshopper “Gener Pool” component to give a set of sliders for each hour of the day. Additionally, Antonello has included an annual schedule component that contains a dictionary of all holidays of every nearly every nation (phew!). Finally, this annual schedule component can output schedules in the text format recognized by EnergyPlus, which allows them to be written directly into the IDF instead of a separate CSV file. This will significantly reduce the size of files needed to run simulations and can even reduce the number of components on your canvas that are needed to add custom schedules. For more information, see Antonello’s explanatory images here and Antonello's example file here. You can also see a full example file of how to apply the schedules to energy simulations here.
4 - EnergyPlus Lookup Folder, Re-run OSM/IDF, and Read Result Dictionary
With the new capabilities of OpenStudio, we have also added a number of components to assist with managing all of the files that you get from the simulation. In particular, Abraham Yezioro has added a Lookup EnergyPlus Folder component that functions very similarly to the Lookup Daylight Folder component. This way, you can run an Energy simulation once and explore the results separately. Furthermore, we have added components to Re-Run OpenStudio .osm files or EnergyPlus .idf files within Grasshopper. These components are particularly useful if you edit these .osm or .idf files outside of Honeybee and want to re-run them to analyze their results in Grasshopper. Lastly, a component has been added to parse the .rdd (or Result Data Dictionary) file that EnergyPlus produces, enabling you to see all of the possible outputs that you can request from a given simulation.
5 - Electric Lighting Components Out of WIP
After Sarith Subramaniam’s initial components to model electric lights with Radiance in the last release, we are happy to report that they have been fully tested and are out of WIP. Improvements include support for all types of light fixture geometries and the ability to use the components in a more “Grasshoppery” list-like fashion. See Sarith’s original release post for more information and several example files showing how to use the components can be found here. 1 , 2 , 3 .
6 - Improvements to THERM Components
A number of bug fixes and improvements have been made to the THERM components in order to make their application more flexible and smooth. Special thanks is due to Derin Yilmaz , Mel King , Farnaz , Ben (@benmo1) , and Abraham Yezioro for all of the great feedback in the process of improving these components.
7 - HBObject Transform Components
After some demand for components that can ease the generation of buildings with modular zone types, two components to transform HBObjects with all of their properties have been added to the 00 | Honeybee section. The components allow you to produce copies of zones that are translated or rotated from the original position.
8 - Comfort Maps Supports PET and Integration of CFD Results
Thanks to the addition of the ‘Physiological Equivalent Temperature’ (PET) component by Djordje Spasic in the last stable release, it is now possible to make comfort maps of PET with Honeybee. PET is particularly helpful for evaluating OUTDOOR comfort with detailed wind fields at a high spatial resolution. As such, the new PET recipe has also been optimized for integration with CFD results. The windSpeed_ input can now accept the file path to a .csv file that is organized with 8760 values in each column and a number of columns that correspond to the number of test points. Components to generate this csv from Butterfly CFD results will be coming in later releases. Stay tuned!
As always let us know your comments and suggestions.
Enjoy!Ladybug Analysis Tools Development Team
…
noceros 3D, en caso de aprobar satisfactoriamente el examen, se les otorga un reconocimiento avalado por el CMJ y la Secretaría del Trabajo. Este workshop va dirigido principalmente a estudiantes de arquitectura; sin embargo, ya que la parametrización es una herramienta que abarca diferentes ámbitos del diseño, se pueden integrar estudiantes de diseño industrial, artistas o estudiantes que tengan relación con lo gráfico y lo formal. Al finalizar el curso, los asistentes serán capaces de manejar Rhinoceros y Grasshopper en un nivel medio, con el objetivo de que el alumno pueda continuar aprendiendo con alguno de nuestros workshops subsiguientes o de manera autodidacta.
Las personas inscritas deben tener conocimientos básicos de geometría y de preferencia utilizar algún programa de dibujo en 2D o modelación en 3d. Rhino.GetMe Rigid // Enfocado a construir un objeto de diseño parametrizado a cualquier escala, el workshop se divide en tres módulos: Módulo 1 // Rhinoceros 3D // Una sesión de cinco horas. Módulo 2 //Grasshopper // Una sesión de cinco horas. Módulo 3 // Ejercicios prácticos /Tres sesiones de diez horas c/u. Es necesario traer el equipo necesario para trabajar, se cuenta con equipos en caso de que algún alumno no cuente con laptop pero son limitados, por favor avísanos a la brevedad si lo requieres. Se les recomienda que traigan dispositivos de almacenamiento en caso de que necesitemos compartir información.
El costo del Workshop es de $6500.00 para profesionales y $5000 pesos para estudiantes.
Pre-venta únicamente para estudiantes, hasta el día viernes 29 de junio, con un costo de $3500.00 pesos.
El cupo del evento es limitado puedes apartar tu lugar y terminar de liquidar antes del 29 de junio en pre-venta, antes del 6 de junio en admisión general.
Para hacer tu registro al workshop por favor envía un correo a workshop@transformalab.com incluyendo:
Nombre
Universidad u oficina de procedencia
Teléfono móvil
En el caso de estudiantes por favor incluyan una copia escaneada de su Constancia de Estudios para hacer válido su descuento.
Una vez recibida su información se les enviará un correo con la información necesaria para realizar su pago mediante depósito bancario, y posteriormente un mail de confirmación de su participación en el Workshop.
www.transformalab.com…
is also takes place in own system. However, this action can be also carried out successfully by a foreign reference, if this considers the focused system as own. Hence, these two criteria are considered in my reflexions, to make your criticism handier for me.
First the question must be put up, how is it in your case? Of friendly manner you answer this question perpetually with the statement that you are not a partial of the system of the architecture.
Furthermore the question would be appropriate, whether an external reference (eg CAD) determined architecture. This can be answered with no, because determining and influencing are different things.
Because you stress now your criticism as a foreign criticism, within the architecture the assuption must be put up, that this criticism is not unusual new on the one hand (because this condition were also in other times like that, and presumably also always so remain) and further more a lack of goodwill in your criticism comes to light, which perhaps distinguishes an external reference.
Based on your critique, it would be also desirable in the system of the architecture if the academic rules become satisfyingly followed, even if this is no guarantor for good academic works. Nevertheless, there is an aspect which at least tolerates the evident lack in the Interdiziplinarität of the architecture. This is the classical and still valid determination of the architecture, presumably regulates not only the actions of the architects, but also those who want to become it.
Many who stand in your criticism (the students, as well as the teachers, ... ), live in the awareness that architecture is a profession that combines as many areas around the topic of Building, and the architect is even only one dilettante among the external specialists. In this determination dilettantism is revalued rather positively, because this state the architects enables to assess the facets of a complicated building project better and to form thereby the whole result positively. To be a good architect, you should have circumspect specialists around yourself. And exactly this knows the system of the architecture, because "THE ARCHITECT" helps himself with the logic of other systems (to repair on the one hand his own deficits), and to create an artificial complexity, which ultimately aims to be the complexity of human beeing.
Here "THE ARCHITECTS" becomes a quality-spoken, which currently seems the external reference (CAD, BIM) would like to take claim for themselves.
........
If would not thought about it, this might be helpful:http://www.amazon.com/The-Alphabet-Algorithm-Writing-Architecture/dp/0262515806/ref=sr_1_1?ie=UTF8&qid=1376920450&sr=8-1&keywords=mario+carpo"Finally, I’d like to restate my criticisms in general terms. If we are serious about moving architecture and urbanism away from purely artistic considerations and into a more rational arena, there has never been a better time than now. All of us have access to immense computational power which can be applied to problems that have been —until quite recently— intractable. But of course the garbage-in-garbage-out adage holds true; computation can be used to generate large amounts of complexity, but complexity does not equal worth. The only time when it makes sense to invoke computation in the design process is when there is some relevant data that needs to be computed" (David Rutton)I want to make it short, and just ask a few questions, and hope that the following questions are relevant also for you, and not be considered outside your system. i think that the weighting to such questions seem to be more valuable, not for the architects.1. What is wrong from a pure artistic intention?2. What is any sense in purely architectural discourse?3. strictly looked, can be determined sense generally in a purely architectural discourse?4. What is purely architectural discourse?5. What is Funktionalismus or Rationalismus without philosophical support? 6. Would not be the pure functional fulfilment empty ? 7. Would be not a critical position on the promise of purely rational algorithms applied?…