to run at full screen. I've gone as far as using an iPad to use as the second monitor via AirDisplay (which actually works really well) but have never been satisfied with any setup that required you to look back and forth as if at a tennis match all day long.
Not long after first using Grasshopper 3+ years ago I've had the desire for a "Live Viewport" component that would allow a live image of the 3d geometry being generated directly in the canvas. Every once in a while I search the forums with the hope of finding a solution, but always come up empty handed. Someday this might exist although for now I have found what might be the next best thing to a native "Live Viewport" component and its enabled with a small app named Sticky Previews. This app uses the task bar preview feature within Windows 7's aero interface to create custom, floating preview windows from any open window currently running. I've only just discovered the app, but it seems to do the trick and has been stable and problem free so far. -- I will post an update if I find out that I might have spoken too soon. The install allows for a 30 day trial and is $15 bucks to purchase. I just found the app and don't know anything about this group that created the app. If you happen to know of them, Id be curious to find out more.
divided windows, cramped and slow;
unified window with floating rhino model preview;
link to the apps webpage;
http://www.ntwind.com/software/sticky-previews.html
Also works with other apps;
and the about me page screen shot;
…
Added by Tyler Selby at 11:25pm on November 26, 2012
serveral questions:the first thing is in c++ i have to implement more methods than in my c# test project.
they are:
int MyGhComponent::MasterParameterIndex::get(){ return 0;}void MyGhComponent::MasterParameterIndex::set(int index){ }bool MyGhComponent::IsValidMasterParameterIndex::get(){ return 1;}
i found no hint for the implementation of that interfaces. could someone tell me that is correct ?OK, it works, but is it well writen ? What is the MasterParameterIndex?
the second "bigger" problem is, i want to have an output of an pointlist.X y Z 1.2 1.3 1.12.1 5.2 9.2...
my first approch was to use a
void MyGhComponent::RegisterOutputParams(GH_Component::GH_OutputParamManager^ pManager){pManager->Register_PointParam("Coordinate", "XYZ", "Node-Coordinate");}
and
void MyGhComponent::SolveInstance(IGH_DataAccess^ DA){Collections::Generic::List<GH_IO::Types::GH_Point3D>^ pnt = gcnew Collections::Generic::List<GH_IO::Types::GH_Point3D>(); for (int i = 0; i < 10; i++) { GH_IO::Types::GH_Point3D^ point = gcnew GH_IO::Types::GH_Point3D(i, i, i); pnt->Add(i); } DA->SetDataList(3, pnt);}
but this exampel doesn't work...i wirte a small workaround and use the following
pManager->Register_DoubleParam("X-Koordinate", "X", "X"); pManager->Register_DoubleParam("Y-Koordinate", "Y", "Y"); pManager->Register_DoubleParam("Z-Koordinate", "Z", "Z"); Collections::Generic::List<double>^ pntx= gcnew Collections::Generic::List<double>(); Collections::Generic::List<double>^ pnty= gcnew Collections::Generic::List<double>(); Collections::Generic::List<double>^ pntz= gcnew Collections::Generic::List<double>(); ... add .. ect.
this workaround do the job, but i want a better soulution. and i know somewhere out there sould be a better solution. i want to use 3D Points directly in GH without list conversation.
so somebody a familiar with c++ / cli ? and could give me some tipps or a soulution ?
the first thing is: what is the right RegisterOutputParams ?
and witch data type is the right ? Point3d doesn't work. so i try GH_IO::Types::GH_Point3D and Rhino::Geometry::Point3d ...
br Friedrich…
) Course Fee: Professional EUR 825,- (+VAT), Student EUR 415,- (+VAT)
Led by plug-in developer and structural engineer Clemens Preisinger, along with Zeynep Aksoz and Matthew Tam from the expert Karamba3D team, this three-day workshop will focus on methods of setting up structural systems in the parametric environment of Grasshopper. The participants will be guided through the basics of analyzing and interpreting structural models, to optimization processes, and how to integrate Karamba3D into C# scripts.
This workshop is aimed towards beginner to intermediate users of Karamba3D. However, advanced users are also encouraged to apply. It is open to both professional and academic users. For beginner users of Rhino and Grasshopper, there will be an optional introductory course one day before the Karamba3D course.
Karamba3D 1is a parametric structural engineering tool which provides accurate analysis of spatial trusses, frames, and shells. Karamba3D is fully embedded in the parametric design environment of Grasshopper, a plug-in for the 3D modeling tool Rhinoceros. This makes it easy to combine parameterized geometric models, finite element calculations, and optimization algorithms like Galapagos.
Course Outline
Introduction and presentation of project examples
Optimization of cross sections of line-based and surface-based elements
Geometric optimization
Topological optimization
Structural performance informed form finding
Understanding analysis algorithms embedded in Karamba3D and visualizing results
Complex workflow processes in Rhino, Grasshopper, and Karamba3D
Places are limited to a maximum of 10 participants with limited educational places. A minimum of 4 participants is required for the workshop to take place. The workshop will be canceled if this quota is not filled by October 28. The workshop will be taught in English.
Course Requirements
Basic Rhino and Grasshopper knowledge is recommended. An introductory course is offered.
No knowledge of Karamba3D is needed. Participants should bring their own laptops with Grasshopper and either Rhino 5 or Rhino 6 installed. You can download a 90-day trial version of Rhino. Karamba3D ½ year licenses for non-commercial use will be provided to all participants.
Please register here……
Added by Matthew Tam at 6:38am on September 13, 2019
bsp;
-Vehicle elements (3D objects and a component for custom vehicles; models from Google Warehouse)
-Traffic Velocity Graphs, drawn on every trajectory curve (allow custom graphs drawn)
-Traffic regulation elements (such as Traffic Lights and Stop Signals) and traffic density
-Particle Systems on trajectory curves, just to manage the traffic regulations and avoid collisions based on security distances
-Traffic Vehicle Animation Modes (Dots, Bounding Boxes or complex Meshes with attributes for final rendering (Giulio Piacentino´s Render Animation)
-Vehicle Lights and Vehicle Sights, to make visual studies
Team:
-Sergio del Castillo Tello (Doctor No, lead programmer)
-Everyone that wants to be involved, support.. these tools
The development of Roadrunner is planned to take part within a Research Group Program at ETSAM (University of Architecture in Madrid); This forum group is created just to test the interest of the community, while we keep on developing (it is still being tested), probably we will share the whole thing in the future. Cheers!
Traffic Cluster Scheme
Traffic Elements
Traffic Urban Systems
Vehicle Elements
Roadrunner - overview
Roadrunner 0 Basics
Roadrunner 1 Modes
Roadrunner 2 Elements
Roadrunner 3 Urban Systems…
heranno la maggior parte delle funzionalità di Rhino, tra cui i comandi più avanzati per la creazione di superfici.
Struttura Le lezioni tratteranno in maniera sistematica argomenti riguardanti l'interfaccia utente, i comandi, la creazione e modifica di curve, superfici e solidi.
Risultati attesi Dopo questo corso l’allievo deve essere in grado di:
• Muoversi agevolmente attraverso l’interfaccia di Rhino.
• Identificare quando è richiesto modellare in maniera free-form o di precisione.
• Creare e modificare curve, superfici e solidi anche di natura complessa.
• Utilizzare ausili di modellazione per la precisione.
• Produzione di facili rendering per la visualizzazione dei modelli di Rhino.
Destinatari Questo corso è rivolto a progettisti e studenti che vogliono imparare in modo efficace i concetti e le caratteristiche del software di modellazione Rhinoceros. Le lezioni saranno esposte da un docente ART qualificato dalla McNeel esperto di modellazione Nurbs.
Prerequisiti Per affrontare il corso sono richieste competenze di Windows, passione e volontà di modellazione; precedenti esperienze di modellazione, anche con altri software, sono utili ma non indispensabili.
Attestato Alla fine del corso verrà rilasciata l’attestato di partecipazione ad un corso qualificato McNeel valido anche per l’ottenimento di crediti formativi universitari.
Luogo Le lezioni si terranno in Via dei Valeri 1 int.9, 00184 ROMA
Pre-iscrizione Per garantire il numero di iscrizioni è necessaria una pre-iscrizione inviando una mail all'indirizzo 4planstudio@gmail.com il cui contenuto deve essere il seguente:
Nome:
Cognome:
Indirizzo di residenza:
mail:
telefono:
La preiscrizione dovrà avvenire entro il 30/11. A seguito di questa procedura verrà inviata dal tutor una mail di conferma con le procedure di iscrizione.
Quota di iscrizione
Il corso prevede le seguenti quote di iscrizione:
studenti: 400 Euro; (sarà necessario presentare in copia la ricevuta di pagamento dell’anno in corso)
non studenti: 470 Euro. Le quote sono considerate iva inclusa.
Info
Per ulteriori informazioni sono a disposizione i seguenti contatti:
Responsabile didattico: arch. Michele Calvano
Info mail: 4planstudio@gmail.com
tel: 340 3476330
…
a modélisation paramétrique avec Grasshopper pour Rhinoceros3D ainsi que démontrer plusieurs façons de l’appliquer à votre travail architectural.
Cette formation est conçue comme une expérience augmentée autour de l’architecture paramétrique et elle comprend aussi :
+ Une introduction au design paramétrique par Francesco Cingolani+ Une étude de cas d’un projet de l’agence de l’agence HDA Hugh Dutton Associés+ Acces gratuit 3 journées à l’espace de coworking SUPERBELLEVILLE
INSTRUCTEURS
FRANCESCO CINGOLANI . designer, enseignant en architecture paramétrique, co-fondateur deSUPERBELLEVILLE coworking, collaborateur de l’agence Hugh Dutton Associés. – voir le profil Linked-in
ŞULE ERTÜRK . Architecte diplômée de l’Université Yildiz Teknik à Istanbul, Master en architecture paramétrique, travaille actuellement aux Ateliers Jean Nouvel dans le département 3D. - voir le profil Linked-in
QUENTIN GAUCHER . Architecte DE-HMONP, diplômé de l’ENSA Paris La Villette, intervenant en architecture paramétrique sur divers projets - voir le profil Linked-in
DATES 25 mars 2013 . Annonce de la formation / Début des inscriptions5 avril 2013 . Fin des inscriptions13 – 14 avril 2013 . Formation
HORAIRES Samedi et Dimanche 13 et 14 avril . 10:00 > 13:00 – 14:00 > 19:00Total : 16 heures
TARIF700 € professionnels400 € étudiants
RÈGLEMENT50% est à régler lors de l’inscription (au plus tard le 5 avril)50% au début de la formation.Les règlements s’effectuent par carte bancaire via Paypal ou par virement bancaire.
NOMBRE DE PARTICIPANTSMinimum pour l’activation de la formation : 5Maximum : 7
CONTACTInscriptions et réglements : fr.cingolani@gmail.com . SUPERBELLEVILLE coworkingInformations : quentin.gaucher@gmail.comimmaginoteca.com/grasshopper
EN BONUSLe café italien et les plats faits maison de Claudia offerts aux participants :)…
lC_UtilEigenSystemSym (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilEigenSystemSym (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_Topostruct3D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_Topostruct3D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_FEASystem (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_FEASystem (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT1D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT1D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
Object: MillC_UtilFFT2D (level 1) { Exception has been thrown by the target of an invocation. TargetInvocationException }
Object: MillC_UtilFFT2D (level 2) { Could not load file or assembly 'Sawapansolversnet, Version=1.0.4490.29339, Culture=neutral, PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified. FileNotFoundException }
EDIT: Even with COFF disabled in GrasshopperDeveloperSettings this still happens (Thanks Jon)
Is millipede not compatible with Rhino version 5? Or is there a different .dll to use?
Having loaded some of the components:
I congratulate you on following Rutten's 3rd law of Grasshopper :)
Although I hope the Solver and especially the Stress lines get further refinement in order to differentiate them as I find it hard to read the small label at the bottom. Maybe the Chimney's can have different numbers 3 = 3D, 2 = 2D etc.
…
ion of both Ladybug and Honeybee. Notable among the new components are 51 new Honeybee components for setting up and running energy simulations and 15 new Ladybug components for running detailed comfort analyses. We are also happy to announce the start of comprehensive tutorial series on how to use the components and the first one on getting started with Ladybug can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O
A second one on how to use the new Ladybug comfort components can be found here:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sho45_D4BV1HKcIz7oVmZ8v
Here is a short list highlighting some of the capabilities of this current Honeybee release:
1) Run EnergyPlus and OpenStudio Simulations - A couple of components to export your HBZones into IDF or OSM files and run energy simulations right from the grasshopper window! Also included are several components for adjusting the parameters of the simulations and requesting a wide range of possible outputs.
2) Assign EnergyPlus Constructions - A set of components that allow you to assign constructions from the OpenStudio library to your Honeybee objects. This also includes components for searching through the OpenStudio construction/material library and components to create your own constructions and materials.
3) Assign EnergyPlus Schedules and Loads - A set of components for assigning schedules and Loads from the Openstudio library to your Honeybee zones. This includes the ability to auto-assign these based on your program or to tweak individual values. You can even create your own schedules from a stream of 8760 values with the new “Create CSV Schedule” component. Lastly, there is a component for converting any E+ schedule to 8760 values, which you can then visualize with the standard Ladybug components
4) Assign HVAC Systems - A set of components for assigning some basic ASHRAE HVAC systems that can be run with the Export to OpenStudio component. You can even adjust the parameters of these systems right in Grasshopper.
Note: The ASHRAE systems are only available for OpenStudio and can’t be used with Honeybee’s EnergyPlus component. Also, only ideal air, VAV and PTHP systems are currently available but more will be on their way soon!
5) Import And Visualize EnergyPlus Results - A set of components to import numerical EnergyPlus simulation results back into grasshopper such that they can be visualized with any of the standard Ladybug components (ie. the 3D chart or Psychrometric chart). Importers are made for zone-level results as well as surface results and surfaces results can be easily separated based on surface type. This also means that E+ results can be analyzed with the new Ladybug comfort calculator components and used in shade or natural ventilation studies. Lastly, there are a set of components for coloring zone/surface geometry with EnergyPlus results and for coloring the shades around zones with shade desirability.
6) Increased Radiance and Daysim Capabilities - Several updates have also been made to the existing Radiance and Daysim components including parallel Radiance Image-based analysis.
7) Visualize HBObject Attributes - A few components have been added to assist with setting up honeybee objects and ensuing the the correct properties have been assigned. These include components to separate surfaces based on boundary condition and components to label surfaces and zones with virtually any of their EnergyPlus or Radiance attributes.
8) WIP Grizzly Bear gbxml Exporter - Lastly, the release includes an WIP version of the Grizzly Bear gbXML exporter, which will continue to be developed over the next few months.
And here’s a list of the new Ladybug capabilities:
1) Comfort Models - Three comfort models that have been translated to python for your use in GH: PMV, Adaptive, and Outdoor (UTCI). Each of these models has a “Comfort Calculator” component for which you can input parameters like temperature and wind speed to get out comfort metrics. These can be used in conjunction with EPW data or EnergyPlus results to calculate comfort for every hour of the year.
2) Ladybug Psychrometric Chart - A new interactive psychrometric chart that was made possible thanks to the releasing of the Berkely Center for the Built Environment Comfort Tool Code (https://github.com/CenterForTheBuiltEnvironment/comfort-tool). The new psychrometric chart allows you to move the comfort polygon around based on PMV comfort metrics, plot EPW or EnergyPlus results on the psych chart, and see how many hours are made comfortable in each case. The component also allows you to plot polygons representing passive building strategies (like internal heat gain or evaporative cooling), which will adjust dynamically with the comfort polygon and are based on the strategies included in Climate Consultant.
3) Solar Adjusted MRT and Outdoor Shade Evaluator - A component has been added to allow you to account for shortwave solar radiation in comfort studies by adjusting Mean Radiant Temperature. This adjusted MRT can then be factored into outdoor comfort studies and used with an new Ladybug Comfort Shade Benefit Evaluator to design outdoor shades and awnings.
4) Wind Speed - Two new components for visualizing wind profile curves and calculating wind speed at particular heights. These allow users to translate EPW wind speed from the meteorological station to the terrain type and height above ground for their site. They will also help inform the CFD simulations that will be coming in later releases.
5) Sky Color Visualizer - A component has been added that allows you to visualize a clear sky for any hour of the year in order to get a sense of the sky qualities and understand light conditions in periods before or after sunset.
Ready to Start?
Here is what you will need to do:
Download Honeybee and Ladybug from the same link here. Make sure that you remove any old version of Ladybug and Honeybee if you have one, as mentioned on the Ladybug group page.
You will also need to install RADIANCE, DAYSIM and ENERGYPLUS on your system. We already sent a video about how to get RADIANCE and Daysim installed (link). You can download EnergyPlus 8.1 for Windows from the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/?utm_source=EnergyPlus&utm_medium=redirect&utm_campaign=EnergyPlus%2Bredirect%2B1).
“EnergyPlus is a whole building energy simulation program that engineers, architects, and researchers use to model energy and water use in buildings.”
“OpenStudio is a cross-platform (Windows, Mac, and Linux) collection of software tools to support whole building energy modeling using EnergyPlus and advanced daylight analysis using Radiance.”
Make sure that you install ENERGYPLUS in a folder with no spaces in the file path (e.g. “C:\Program Files” has a space between “Program” and “Files”). A good option for each is C:\EnergyPlusV8-1-0, which is usually the default locations when you run the downloaded installer.
New Example Files!
We have put together a large number of new updated example files and you should use these to get yourself started. You can download them from the link on the group page.
New Developers:
Since the last release, we have had several new members join the Ladybug + Honeybee developer team:
Chien Si Harriman - Chien Si has contributed a large amount of code and new components in the OpenStudio workflow including components to add ASHRAE HVAC systems into your energy models and adjust their parameters. He is also the author of the Grizzly Bear gbxml exporter and will be continuing work on this in the following months.
Trygve Wastvedt - Trygve has contributed a core set of functions that were used to make the new Ladybug Colored Sky Visualizer and have also helped sync the Ladybug Sunpath to give sun positions for the current year of 2014
Abraham Yezioro - Abraham has contributed an awesome new bioclimatic chart for comfort analyses, which, despite its presence in the WIP tab, is nearly complete!
Djordje Spasic - Djordje has contributed a number of core functions that were used to make the new Ladybug Wind Speed Calculator and Wind Profile Visualizer components and will be assisting with workflows to process CFD results in the future. He also has some more outdoor comfort metrics in the works.
Andrew Heumann - Andrew contributed an endlessly useful list item selector, which can adjust based on the input list, and has multiple applications throughout Ladybug and Honeybee. One of the best is for selecting zone-level programs after selecting an overall building program.
Alex Jacobson - Alex also assisted with the coding of the wind speed components.
And, as always, a special thanks goes to all of our awesome users who tested the new components through their several iterations. Special thanks goes to Daniel, Michal, Francisco, and Agus for their continuous support. Thanks again for all the support, great suggestions and comments. We really cannot thank you enough.
Enjoy!,
Ladybug + Honeybee Development Team
PS: If you want to be updated about the news about Ladybug and Honeybee like Ladybug’s Facebook page (https://www.facebook.com/LadyBugforGrasshopper) or follow ladybug’s twitter account (@ladybug_tool).
…