ysim.ning.com/
When you run the simualtion you will notice on the batch terminal that Daysim is also being called, so you may want to consider how Daysim uses Radiance files & data.
Regarding your current problem, I think you stumbled onto something weird and interesting.
Interior and exterior readings appear to differ by 40 in the best case scenarios. Even setting the transmittance to 1 yields similar results. I tried changing from cummulative sky to climate sky and got similar values. Changing the test points did nothing either.
I think, (yet I'm too lazy to prove this) that the difference in values stems from diffuse radiation over the sky dome.
If you delete everything except the glass you'll notice that interior values are like 80-90% of the exterior values (this seems like the expected behaviour with a transmittance of 1). So, if we consider that a vertical window, part of an opaque box, is receiving radiation from 25% of a sphere, as you start to inset the interior test points the radiation they receive will be a fraction of the 25%.
Let me try to explain this better...The exterior surface receives radiation from a section of a sphere calculated by 180degrees on the xy plane (let’s call this angle theta) and by 90degrees (let’s call this angle phi) in azimuthal elevation. If you integrate this over spherical coordinates (theta from 0 to pi; phi from 0 to pi/2) you will find that it comes to a quarter of a sphere. By comparison, the interior surface will not integrate theta from 0 to 180degrees,nor phi from 0 to 90degrees, instead it will be the subtended angle from the exterior surface as a function of their separation; the farther in you go the smaller the view of the outside.
If my hypothesis is correct there shouldn't be that much difference since the separation is only 10cms...the subtended angle would be like 170 instead of 180 for theta and 85 instead of 90 for phi...overall if you integrate both spherical areas there should only by a difference of 10%.
In conclusion, I believe the unexpected behaviour stems from the previous subtended angle thing. If direct radiation was the only factor the difference would be the aforementioned 10%, which suggests that an additional source of energy is also affected by this. Perhaps indirect and diffuse radiation from other areas of the sky dome.
I’m definitely intrigued on why this is happening. Please post if you figure it out.
Regards,
Mauricio
…
TB of RAM. I think I'm going to start a GoFundMe campaign to buy one for myself :)
2- The server's cost is about $13 an hour. I get free access to supercomputer through my university and xsede.org because I earned an NSF Honorable mention last March, however, the supercomputers available through both resources are a little complicated for me to use, as opposed to the one available from amazon that has Microsoft server 2012 already installed.
3- I wanted to run 400 annual glare simulations for 400 different views.
4- I tried a to perform annual glare simulation for one view on my Dell XPS that has Intel Core i7-6700HQ processor and 16GB of system memory. The simulation took 2 hours to complete. Radiance parameter ab was set to 6.
5- I wanted to obtain the batch file for each view so I can run them on the server. So I used the fly component to run all 400 simulations and closed the cmd windows, that wasn't bad ( for me at least) because I asked my son to this job for me, he was just glad to help me :)
6- I created one batch file using this cmd command:
dir /s /b *.bat > runall.bat
This created a file with the path to each .bat file. I edited this file in Notepad++ to include the word "start" at the beginning of each line. This was done using the "find and replace" dialogue box.
7- I split my newly created batch file into 3 batch files, each one has about 130 file names and " start" before the file names.
8- installed radiance on my server
9- Ran the first batch file on the server, this started 130 cmd windows performing my simulations, CPU usage was anywhere between 90% to 100% and about 105 GB of RAMs were used.
10. It took about 5 hours to complete all 130 simulations, I expected to run all in 2 hours but can't complain because this would've taken about 260 hours to run on my laptop. After the simulations done I ran the second and then the third batch files ( total of about 15 hours).
11. I got 400 valid dgb files. Couldn't be happier!
…
he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
ed file and code below:
Color ColorAt(Mesh mesh, int faceIndex, double t0, double t1, double t2, double t3) { // int rc = -1; var color = Rhino.Display.Color4f.Black;
if( mesh.VertexColors.Count != 0) { // test to see if face exists if( faceIndex >= 0 && faceIndex < mesh.Faces.Count ) { /// Barycentric quad coordinates for the point on the mesh /// face mesh.Faces[FaceIndex].
/// If the face is a triangle /// disregard T[3] (it should be set to 0.0).
/// If the face is /// a quad and is split between vertexes 0 and 2, then T[3] /// will be 0.0 when point is on the triangle defined by vi[0], /// vi[1], vi[2]
/// T[1] will be 0.0 when point is on the /// triangle defined by vi[0], vi[2], vi[3].
/// If the face is a /// quad and is split between vertexes 1 and 3, then T[2] will /// be -1 when point is on the triangle defined by vi[0], /// vi[1], vi[3]
/// and m_t[0] will be -1 when point is on the /// triangle defined by vi[1], vi[2], vi[3].
MeshFace face = mesh.Faces[faceIndex];
// Collect data for barycentric evaluation. Color p0, p1, p2;
if(face.IsTriangle) { p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else { if( t3 == 0 ) { // point is on subtriangle {0,1,2} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.C]; } else if( t1 == 0 ) { // point is on subtriangle {0,2,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; //t0 = t0; t1 = t2; t2 = t3; } else if( t2 == -1 ) { // point is on subtriangle {0,1,3} p0 = mesh.VertexColors[face.A]; p1 = mesh.VertexColors[face.B]; p2 = mesh.VertexColors[face.D]; //t0 = t0; //t1 = t1; t2 = t3; } else { // point must be on remaining subtriangle {1,2,3} p0 = mesh.VertexColors[face.B]; p1 = mesh.VertexColors[face.C]; p2 = mesh.VertexColors[face.D]; t0 = t1; t1 = t2; t2 = t3; } }
/** double r = t0 * p0.FractionRed() + t1 * p1.FractionRed() + t2 * p2.FractionRed(); double g = t0 * p0.FractionGreen() + t1 * p1.FractionGreen() + t2 * p2.FractionGreen(); double b = t0 * p0.FractionBlue() + t1 * p1.FractionBlue() + t2 * p2.FractionBlue();
ON_Color color; color.SetFractionalRGB(r, g, b);
unsigned int abgr = (unsigned int)color; rc = (int) ABGR_to_ARGB(abgr); **/ var c0 = new Rhino.Display.Color4f(p0); var c1 = new Rhino.Display.Color4f(p1); var c2 = new Rhino.Display.Color4f(p2); float s0 = (float) t0; float s1 = (float) t1; float s2 = (float) t2;
float R = s0 * c0.R + s1 * c1.R + s2 * c2.R; float G = s0 * c0.G + s1 * c1.G + s2 * c2.G; float B = s0 * c0.B + s1 * c1.B + s2 * c2.B; color = new Rhino.Display.Color4f(R, G, B, 1); } } return color.AsSystemColor(); }
…
will work slightly different from before. Sorry about breaking this, but it proved impossible to improve the selection logic with the fairly ambiguous notation that was implemented already.
Not every change is breaking though and I hope that most simple matching rules will work as before. There will be a McNeel webinar on Wednesday the 6th of November where I discuss the new selection rules (as well as path mapping syntax and relative offsets within one or more data trees). This will be a pretty hard-core webinar aimed at expert users. The event will be recorded so you can always go and watch it later. I figured I'd briefly explain the new selection rules on Ning before I release the update though.
-------------------------------------------------------------------------------
Imagine we have the following data tree, containing a bunch of textual characters:
{0;0} = [a,e,i,o,u,y] {0;1} = [ä,ë,ê,ï,î,ö,ô,õ,ü,û,ÿ,ý] {1;0} = [b,c,d,f,g,h,j,k,l,m,n,p,q,r,s,t,v,w,x,z] {1;1} = [ç,ĉ,č,ĝ,ř,š,ş,ž]
There are a total of four branches {0;0}, {0;1}, {1;0} and {1;1}. The first branch contains all the vowels that are part of the standard English alphabet. The second branch contains all non-standard vowels and branches three and four contain the standard and non-standard consonants respectively.
So what if we want to select from this tree only the standard vowels? Basically include everything in the first branch and disregard everything else. We can use the [Tree Split] component with a selection rule to achieve this:
{0;0}
This selection rule hard-codes the number zero in both tree path locations. It doesn't define an item index rule, so all items in {0;0} will be selected.
If we want all the vowels (both standard and non-standard), then we have several options:
{0;?} = select all branches that start with 0
{0;(0,1)} = select all branches that start with 0 and end in either 0 or 1
{0;(0 to 1)} = ......................................... and end in the range 0 to 1.
Conversely, selecting all standard vowels and consonants while disregarding all non-standard character can be achieved with rules as follows:
{?;0}
{(0,1);0}
{(0 to 1);0}
It is also possible to select items from each branch in addition to limiting the selection to specific branches. In this case another rule stated in square brackets needs to be appended:
{0;?}[0 to 2]
The above rule will select the first three vowels from the standard and the non-standard lists.
Basically, rules work in a very consistent way, but there are some syntax conventions you need to know. The first thing to realize is that every individual piece of data in a data-tree can be uniquely and unambiguously identified by a collection of integers. One integer describes its index within the branch and the others are used to identify the branch within the tree. As a result a rule for selection items always looks the same:
{A;B;C;...;Z}[i] where A, B, C, Z and i represent rules.
It's very similar to the Path Mapper syntax except it uses square brackets instead of parenthesis for the index (the Path Mapper will follow suit soon, but that won't be a breaking change). You always have to define the path selector rule in between curly brackets. You can supply any number of rules as long as you separate them with semi-colons.
The index rule is optional, but -when provided- it has to be encased in square brackets after the path selection rule(s).
The following rule notations are allowed:
* Any number of integers in a path
? Any single integer
6 Any specific integer
!6 Anything except a specific integer
(2,6,7) Any one of the specific integers in this group.
!(2,6,7) Anything except one of the integers in this group.
(2 to 20) Any integer in this range (including both 2 and 20).
!(2 to 20) Any integer outside this range.
(0,2,...) Any integer part of this infinite sequence. Sequences have to be at least two integers long, and every subsequent integer has to be bigger than the previous one (sorry, that may be a temporary limitation, don't know yet).
(0,2,...,48) Any integer part of this finite sequence. You can optionally provide a single sequence limit after the three dots.
!(3,5,...) Any integer not part of this infinite sequence. The sequence doesn't extend to the left, only towards the right. So this rule would select the numbers 0, 1, 2, 4, 6, 8, 10, 12 and all remaining even numbers.
!(7,10,21,...,425) Any integer not part of this finite sequence.
Furthermore, it is possible to combine two or more rules using the boolean and/or operators. If you want to select the first five items in every list of a datatree and also the items 7, 12 and 42, then the selection rule would look as follows:
{*}[(0 to 4) or (6,11,41)]
The asterisk allows you to include all branches, no matter what their paths looks like.
It is at present not possible to use the parenthesis to define rule precedence, rules are always evaluated from left to right. It is at present also not possible to use negative integers to identify items from the end of a list.
If you want to know more, join the Webinar on Wednesday!
--
David Rutten
david@mcneel.com
Seattle, WA…
Added by David Rutten at 8:57pm on November 3, 2013
y using the Honeybee_Update Honeybee component.
The video below (best viewed in full-screen mode) provides an idea of what these components are capable of being used for:
The video below shows how these components can be used in an existing Honeybee project (for additional links please open this video in youtube):
I have uploaded two examples as Hydra files that show how these components can be used for grid-point and image-based simulations:
Example1 : Grid Point Calculations
Example2: Image based simulation
Finally, a more esoteric application is demonstrated in this video:
These components are still in the beta-testing stage. Some of the limitations of the components are:
1. Only Type C photometry IES files are supported at present.
2. Rhino is likely to get sluggish if there are too many luminaires (i.e. light fixtures) present in a scene.
3. Due to the spectral limitations of the ray-tracing software (RADIANCE), simulations involving color mixing might not be physically realizable.
Additional details about photometric and spectral calculations are probably an overkill for this forum. However, I'd be glad to answer any related questions. Please report any bugs or request new features either on this forum or on Github.
Mostapha, Leland Curtis, Reinhardt Swart and Dr. Richard Mistrick provided valuable inputs during the development of these components.
Thanks,
Sarith
Update 16th January 2017:
An example with some new components and bug fixes since the initial release announcement can be found here
…
Introduzione a Grasshopper", il primo manuale su Grasshopper.
.
I corsi PLUG IT nascono dalla volontà di promuovere le nuove tecnologie digitali di supporto alla progettazione e condividere il know-how maturato attraverso ricerca, collaborazione con i più importanti studi di architettura e pubblicazioni internazionali.
.
Verranno introdotte le nozioni base di Grasshopper approfondendo le metodologie della progettazione parametrica e le tecniche di modellazione algoritmica per la generazione di forme complesse. Il corso è rivolto a studenti e professionisti con esperienza minima nella modellazione 3D e si articolerà in lezioni teoriche ed esercitazioni.
. Argomenti trattati:
- Introduzione alla progettazione parametrica: teoria, esempi, casi studio - Grasshopper: concetti base, logica algoritmica, interfaccia grafica - Nozioni fondamentali: componenti, connessioni, data flow
- Funzioni matematiche e logiche, serie, gestione dei dati - Analisi e definizione di curve e superfici
- Definizione di griglie e pattern complessi - Trasformazioni geometriche, paneling - Attrattori, image sampler
- Data tree: gestione di dati complessi - Digital fabrication: teoria ed esempi - Nesting: scomposizione di oggetti tridimensionali in sezioni piane per macchine CNC
.
Verrà rilasciato un attestato finale.
.
Ulteriori info e programma completo su: www.arturotedeschi.com e su www.edizionilepenseur.it…
of the new challenges presented to the society and architecture in Portugal. With technological developments, tools once limited to not creative areas begin to be part of the everyday life of students in University Architecture Laboratories and change its design processes. The architecture design methods are changing rapidly with the introduction of CAD-CAM software’s. In recent years, new software’s have been available for 3D representation and digital fabrication, which have allowed creating new ways of interacting with the computer and architecture. Contemporary architecture in its various scales, seeks greater flexibility, adaptability and interactivity taking into account both the means and goals of kinetic systems. Thus, it is essential to the creative industry players to acquire new knowledge about the latest technological innovations and how they can solve some of the problems and challenges of today’s society.
The workshop will explore the use of Grasshopper, Firefly and Arduino as creative and technical tools in all the design process, to simulation and prototype 3D interactive architecture solutions.
The theoretical and practical workshop (64 hours) taught in English and Portuguese, will be composed of two modules: (1) LS_01: Firefly +Grasshopper + Arduino and Scale Model Fabrication; (2) LS_02: Design Studio – Discursive Wall.
This workshop is intended for students and professionals from different areas of knowledge, (architecture, design, fine arts, engineering, music and programming) who are interested in the process of design: from ideation to prototyping. The participants will generate scale models.
Registration is limited to 20 participants with or without software knowledge. Participants will work individually and in group. Participants must take their own laptops to the workshop. Registrants should complete the form by 28 February 2012. Once registered, you will receive an email confirming your acceptance.
Questions or doubts contact us:
alivingsystem@gmail.com
…
Added by Brimet Silva at 7:07pm on January 16, 2012
rendo posizioni lavorative fino a qualche tempo fa impensabili. Questo nuovo approccio ha infatti la caratteristica di avvicinarsi alla programmazione informatica, ma con un approccio facilitato grazie ai componenti visuali.Hai bisogno di un motivo in più per usare Grasshopper? Eccolo! Trattandosi di uno strumento ancora in fase di testing (anche se perfettamente funzionante) l’applicativo è completamente gratuitoScarica la tua versione e inizia subito ad usarlo!Corsi certificatiLe lezioni sono tenute da Antoni(n)o Marsala, docente certicato McNeel, con alle spalle oltre 5 anni di esperienza nell’insegnamento di Rhinoceros. Negli ultimi anni abbiamo tenuto in grande considerazione l’evolversi di questo plugin e abbiamo deciso di investire sulle sue potenzialità.Nel Febbraio del 2011, grazie ad Antoni(n)o Marsala, è uscito Algoritmi Generativi, edizione italiana del libro di Zubin Khabazi Generative Algorithms with Grasshopper. Entrami sono scaricabili gratuitamente e rappresentano dei validi strumenti per capire il mondo di Grasshopper.Da diversi mesi inoltre, il Mandarino BLU, ha attivato una collaborazione con La Bottega di Galileo di Pisa, officina del libero scambio di idee, presentando dei progetti formativi post universitari, per coloro che vogliono entrare nel mondo della progettazione di nuova generazione.Dalla collaborazione con Multiverso, nasce invece un progetto formativo più ampio sviluppato a Firenze in via Campo d’Arrigo 40rLeggi il nostro programma didattico o scarica la versione in pdf…
2:
-Developing the winning design into a working application -Testing -Beers and BBQ
Details:
-Tutors: Gregory Epps, RoboFold founder, Florent Michel RoboFold software developer. -See previous workshops here. -Download Poster here.
-Please install Rhino5 and Grasshopper and Godzilla before this event.
-No previous experience with Grasshopper necessary. -Hours: 10am-6pm. -Location details: here.
***COMPETITION: THE BEST USE OF GODZILLA GETS A FREE PLACE***
Judged on creativity and practicality. Submit your name, association and a link to your video to robots@robofold.com We add an additional place for the winner. Flights, accommodation etc are not free...
Join us for the first Godzilla robot workshop - experiment with the easiest robot software on the Grasshopper platform.
More details and resources on: http://www.grasshopper3d.com/group/godzilla
Workshop Fee:
Student: £ 399
Professional: £ 599…