he Cordyceps. Maybe some of you find this helpful/useful.
So basically, the Cordyceps is a physical module with 4 knobs and 1 slider. The knobs give an output between 1 and 1000, while the physical slider outputs 0-359. And of course, for this physical module I wrote a plugin to communicate with it. The knobs are intended to be the variables that modifies the design, while the physical slider is intended to be connected to the camera component.
Here I will put up "the recipe" for all to make their own module. You will be able to download the plugin as well.
Please send me a message if you want the 3D-files for the knobs, the box and slider knob. They've been made to directly 3D-print.
Plugin:
https://github.com/zakadjeb/Cordyceps/blob/master/Cordyceps/Cordyce...
Code for Arduino IDE:
https://github.com/zakadjeb/Cordyceps/blob/master/Arduino/_Arduino_...
What you need:
1x - Arduino (Leonardo, UNO or whatever)
4x - Potentiometers
1x - Sliding potentiometer
1x - Breadboard
Bundle of jump wires.
1. So, a potentiometer is a variable resistor, which is basically a component that changes the resistance between the voltage and the ground.
If A is supplied with 5V then B must be connected to Ground. The W will give "read" the resistance, and thus should be placed in Analog input (A0-A5) on the Arduino. The slider potentiometer works the same way.
2. Now connect the 4 pots to each their Analog input. The slider is supposed to be in A4. So to make sure:
A0: Knob1
A1: Knob2
A2: Knob3
A3: Knob4
A4: Slider
3. Now it's time to connect the voltage! Using the breadboard, the voltage can be sent through 1 line, the Ground as well. It should be quite easy to connect them.
4. Now, download the Arduino IDE and copy-paste the code I supplied above. In the IDE, you need to let it know which Arduino you're working with, and which port is should send the script.
5. Almost there. Download the plugin. Open the port you're using through the plugin. Set Start to True and the Cordyceps should be within you.
This recipe will be updated!
Let me know if there are any issues.
// Zakaria Djebbara…
rves/holes. However, the Kangaroo script itself is prone to locking up so it seems like it might take forever. You can even double click stop the timer from the Windows task bar, I hadn't noticed that before:
You have to use that or right click disable the timer since even with the Reset toggle button input set to True the timer itself locks up the script a bit when you are changing things around.
Just setting the min/max numbers both to a desired mesh size gives a uniform mesh:
Oh weird, it's about if the timer is right click set to so small an interval that it gets ahead of Kangaroo! When you see how long each cycle is taking with the Display > Canvas Widgets > Profiler you just set the timer for above that and the interface comes back into being responsive. It only takes a few Kangaroo cycles to do the inflation, so a full second timer interval is even workable.
A finer mesh:
It's funny running it so slow since it overinflates at first, bulging out, before it equilibrates.
You have control over inflation pressure and mesh stiffness, for a variety of effects.
This is a good system once I realized the timer needed to be mellowed out.
What made it work was the fast custom meshing since a normal mesh is awful and MeshMachine wouldn't work with sharp corner holes at all, breaking out of the boundary even if I fixed curves or vertices or did the equivalent with NURBS surfaces instead of a starting mesh.
There is an initiation time for Kangaroo that doesn't show up on its Profiler time that happens even with the timer off.
There are some fine areas that can't inflate with a reasonable mesh setting:
Worth playing with but no match for ArtCAM since it suffers odd delays in between working fast. If I could get better 2D meshes, that were more adaptive it would be better, but MeshMachine is one of the only re-meshers I know and it's broken for even mildly sharp hole features.
Ah, how about a crude mesh that is then subdivided, guaranteeing inner vertices everywhere? Sort of works, but is still too dense. Way too dense to even do anything. The subdivision triangulates the quads, vastly increasing the mesh wire density. Better just to make a finer initial mesh with plenty of quads.…
Added by Nik Willmore at 12:57am on February 21, 2016
ies and ideas (in this case agent-based modelling) simply because they are the new cool thing to do and, if we think carefully about how the integration of agent-based modeling will improve the accuracy and usefulness of our models, we are more likely to make lasting contributions through their integration.
For example, it seems vital to me that such agent-based models be grounded in some clear quantifiable observations of human behavior in real buildings as opposed to relying on our own coefficients to represent how valuable we think certain things are to the occupants. I will give an example of two agent-based ideas that I have had - one of which has turned out to seem much more valuable in the long-run because of it's grounding in real-world data and I plan to implement soon.
To start with the more valuable example, ever since I read this awesome book on adaptive thermal comfort (https://books.google.com/books?id=vE7FBQAAQBAJ&printsec=frontcover&dq=adaptive+thermal+comfort&hl=en&sa=X&ved=0ahUKEwjDmO6avNnJAhUD9h4KHXWVBuAQ6AEIHDAA#v=onepage&q=adaptive%20thermal%20comfort&f=false), I have had several ideas for how to integrate the findings of recent comfort surveys into our energy models. Generally, the focus of thermal comfort research seems to be shifting from theoretical human energy balance calculations to surveys of occupant behavior, giving us a lot of great data that helps incorporate these behavioral factors in our energy models. To continue one of the ideas that you mention, Theodore, here is a plot from the book that describes the window-opening behavior of occupants as the indoor temperature increases:
Currently, EnergyPlus does not easily allow you to set such a function for window-opening, as you point out but the incorporation of this behavior seems necessary to produce an accurate model of a naturally ventilated building (since opening all of the windows as soon as the indoor temperature hits 21 C is far from realistic). To get around this, I was thinking of including an option on the nat vent component that will put in a series of IF/THEN nat vent objects that approximate this smooth function through a step function:
IF 19 < indoor temperature < 20 THEN WindowOpening = 10%
IF 20 < indoor temperature < 21 THEN WindowOpening = 15%
IF 21 < indoor temperature < 22 THEN WindowOpening = 21%
IF 22 < indoor temperature < 23 THEN WindowOpening = 35%
...
I am hoping to implement this soon.
To describe the example that I have realized was not so helpful with time, when I was first drafting the idea for high-resolution comfort maps (https://www.youtube.com/playlist?list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A), I originally thought that I would develop computer models an animations of occupants moving around the thermally diverse space to make themselves more comfortable. Once I started to get into this, however, I realized that the social characteristics of a space usually have a much larger impact on where people place themselves than the thermal characteristics and it is not until the thermal characteristics become very uncomfortable or the presence of other people is completely removed that the thermal environment dominates the movement behavior. Thus, in order to model the occupant behavior, I would have to code in the relative importance of a large number of these social characteristics in relation to thermal comfort, which would have been a process of me simply making up coefficients to produce cool-looking but somewhat meaningless animations. It is only when my nicely-designed thermal environments were aligned with the social/programmatic characteristics of the space that I could argue that I was justifiably adding value since the thermal characteristics were not in contradiction to or being weighted against the social ones. So, in the end, realized that all I needed in order to produce a good design was to align the thermal environment with the placing of program and the agent-based modelling would not have enabled the production of a much better design. This is the reason why the human silhouettes are manually placed in the thermal animations on the youtube playlist in the above link and is the reason why I do not intend to incorporate agent-based modelling in this particular manner.
Let me know your thoughts on this as I realize I may also be looking at this from a narrow perspective that is not informed by all that agent-based modelling has to offer.
-Chris…
(1) I have been exporting small sections of a larger model into Maya from Rhino as FBX. In Maya I rotate and scale the models (-90 in X, Scale XYZ 0.001). The Named Views are being saved, but do not have a successful import into the Maya model. They do not appear as in Rhino, and the problem is not solved by scaling or rotating the cameras.
(2) If I try going the other direction, the cameras exported from Maya as FBX are also not aligning with the model in Rhino as they are in Maya.. I will do my best to post some images of the problem and hope you can help.
error !!
This is what the named views look like
here I am trying to the other way with a good view from Maya
strange placement..
This is the best result I can achieve, after I scale the camera by 1000
Any Advice???
Thanks, Robert.
…
TB of RAM. I think I'm going to start a GoFundMe campaign to buy one for myself :)
2- The server's cost is about $13 an hour. I get free access to supercomputer through my university and xsede.org because I earned an NSF Honorable mention last March, however, the supercomputers available through both resources are a little complicated for me to use, as opposed to the one available from amazon that has Microsoft server 2012 already installed.
3- I wanted to run 400 annual glare simulations for 400 different views.
4- I tried a to perform annual glare simulation for one view on my Dell XPS that has Intel Core i7-6700HQ processor and 16GB of system memory. The simulation took 2 hours to complete. Radiance parameter ab was set to 6.
5- I wanted to obtain the batch file for each view so I can run them on the server. So I used the fly component to run all 400 simulations and closed the cmd windows, that wasn't bad ( for me at least) because I asked my son to this job for me, he was just glad to help me :)
6- I created one batch file using this cmd command:
dir /s /b *.bat > runall.bat
This created a file with the path to each .bat file. I edited this file in Notepad++ to include the word "start" at the beginning of each line. This was done using the "find and replace" dialogue box.
7- I split my newly created batch file into 3 batch files, each one has about 130 file names and " start" before the file names.
8- installed radiance on my server
9- Ran the first batch file on the server, this started 130 cmd windows performing my simulations, CPU usage was anywhere between 90% to 100% and about 105 GB of RAMs were used.
10. It took about 5 hours to complete all 130 simulations, I expected to run all in 2 hours but can't complain because this would've taken about 260 hours to run on my laptop. After the simulations done I ran the second and then the third batch files ( total of about 15 hours).
11. I got 400 valid dgb files. Couldn't be happier!
…
he time to work with it.
the project is about facade strips which turns along height. the top angle is
parallel to the facade and the bottom is max. 90 degrees twisted, but the strips
should turn diffrently to achieve more dinamic look.
first i have tried to achieve this by calculating distance between the rotation angle from points of the grid and a single point.
then i have tried to ad some more effecting points and used the distance to the divided surface (the circles are just to control the area of effection):
i manually lofted it.
the result is a bit annoying becouse the points that effect the angle are always visible:
i have triend to solve this by drawing a line and divided it to recieve points along the bottom of the geometry. the result is not working properly:
Anyway,
there must be a better/smoother way to achieve this. i would like to effect the twist of the surfaces by distance to a spline, but im just lost. can you help me please?
the problems im encountering:
0- distance spline to grid to effect the angle
1- list of x/y coordinates and angle of rotation for each point of the grid
2- export points to excel
3- lofting lines in one direction only (x1, x2, x3...)
4- reduce the list data to 2 decimal (0,00)
5- maybe angle from radian to degrees
thx…
size component supported only ground PV panels and angled roof PV panels.
Download the newest PV SWH system size component from here (Click on "View Raw" to download it. Then move the downloaded .ghuser file to File->Special Folders->User Objects Folder, an confirm to overwrite it with previously located one).
Just a few opinions on the project you are currently working on:This kind of fixed, non-transparent (overhang) PV panels attached to a building facade are vert convenient for locations with higher latitudes.The reason for this is because they (fixed overhang PV panels) are dimensioned according to the sun position at summer solstice. Elevation angles on summer solstice at higher latitude locations are lower, than those of lower latitude locations.Due to Incheon's low latitude (37), you will get rather short length of the PV panels* : less than 10 centimeters (0.097 meters in the attached .gh file below). As you have mentioned, Galapagos needs to be used too.I will just mention some of the good and bad ways in which the upper issue could be somewhat avoided:1) Increasing the vertical distance between PV panels (PV panels appear above every second window).2) Increase the tilt angle. This will increase the length of PV panels also, but will decrease the final annual AC energy output.An example of this solution has been applied at FKI building in Seoul (latitude: 37N):I already did some tests (with tilt angles: 40, 45, 55) and this does not seem like a good solution, though.3) Shrinking the "sun window" by using the minimalSpacingPeriod_ input. In Photovoltaics, a planner is suppose to make the 9h to 15h part of the sun window free of any obstructions. If you try to decrease the "sun window" to 10 to 14h, the length of your PV panels will increase. You can try to experiment a little bit with this (set your minimalSpacingPeriod_ to 21th of June 10 to 14hours). In general, shrinking the sun window on summer solstice is not a good principle during planning.4) Using tracking PV panels, not fixed ones. But Ladybug Photovoltaics components do not support this kind of PV systems. They only support fixed ones.I would personally go with the first option. You can also experiment with the second and third one.Comment back if you have any other questions.-----------------------* By "length of the PV panels" I mean the: tiltedArrayHeight_ input of the PV SWH system size component.…
answer further on Friday.
The "ghdoc" variable and rhinoscriptsyntaxThe ghdoc variable is provided by the component if you select it as "target".You might ask yourself: "why do we need it"?Its use comes from the very design of the established RhinoScript library. This library is imperative, which means it is build from a set of procedures or functions that act on various geometrical types. Additionally, there is one level of indirection: most of the time, the user does not work with the geometry itself in the variable, but rather with Guid of geometry that is present in a document. This is exactly what ghdoc is: it is the document that the RhinoScript library always implicitly targets with all AddSomething() calls (for example, AddLine()).
Based on this comment...RhinoScript use within GhPython may be less idealThat comment is from a previous version of this component that did not have the ghdoc yet.With the ghdoc variable, the standard Rhino document target of RhinoScript is replaced, therefore we can use Grasshopper while leaving the Rhino document unchanged. This saves uncountable Undo's, and makes it easy to structure ideas through the definition graph
...is the rhinoscriptsyntax target irrelevant if using solely RhinoCommon classesYes. If you create class instances (objects), you will need to create also your own collection objects to store them (mostly lists, trees). You can imagine the ghdoc as being an alternative to them, just that you do not access data by index (number), but by Guid. So you can use the RhinoScript or the RhinoCommon libraries independently or mix them. The RhinoScript implementation in Rhino is open-source and is all written in RhinoCommon. Also the ghdoc implementation is open-source, and is here.
RhinoScript and/or RhinoCommon objects which are not recognized as valid Grasshopper geometryYes, sure, Grasshopper handles only a portion of all available types. Basically, unhandled types are all the types that do not exists in the 'Params' tab. For example, there is no textdot and no leader, so on line 149 there is a throw statement and all TextDot calls (about line 350) are commented out. When/if Grasshopper one day will support these types, these calls will be implemented.
DataTreeHere is a small sample. However, I think that 80% of the times it is not necessary to program for DataTrees, as the logic itself can be applied per-list and Grasshopper handles list-iteration.
I hope this helps,
- Giulio_______________giulio@mcneel.comMcNeel Europe…