ysim.ning.com/
When you run the simualtion you will notice on the batch terminal that Daysim is also being called, so you may want to consider how Daysim uses Radiance files & data.
Regarding your current problem, I think you stumbled onto something weird and interesting.
Interior and exterior readings appear to differ by 40 in the best case scenarios. Even setting the transmittance to 1 yields similar results. I tried changing from cummulative sky to climate sky and got similar values. Changing the test points did nothing either.
I think, (yet I'm too lazy to prove this) that the difference in values stems from diffuse radiation over the sky dome.
If you delete everything except the glass you'll notice that interior values are like 80-90% of the exterior values (this seems like the expected behaviour with a transmittance of 1). So, if we consider that a vertical window, part of an opaque box, is receiving radiation from 25% of a sphere, as you start to inset the interior test points the radiation they receive will be a fraction of the 25%.
Let me try to explain this better...The exterior surface receives radiation from a section of a sphere calculated by 180degrees on the xy plane (let’s call this angle theta) and by 90degrees (let’s call this angle phi) in azimuthal elevation. If you integrate this over spherical coordinates (theta from 0 to pi; phi from 0 to pi/2) you will find that it comes to a quarter of a sphere. By comparison, the interior surface will not integrate theta from 0 to 180degrees,nor phi from 0 to 90degrees, instead it will be the subtended angle from the exterior surface as a function of their separation; the farther in you go the smaller the view of the outside.
If my hypothesis is correct there shouldn't be that much difference since the separation is only 10cms...the subtended angle would be like 170 instead of 180 for theta and 85 instead of 90 for phi...overall if you integrate both spherical areas there should only by a difference of 10%.
In conclusion, I believe the unexpected behaviour stems from the previous subtended angle thing. If direct radiation was the only factor the difference would be the aforementioned 10%, which suggests that an additional source of energy is also affected by this. Perhaps indirect and diffuse radiation from other areas of the sky dome.
I’m definitely intrigued on why this is happening. Please post if you figure it out.
Regards,
Mauricio
…
rld.wolfram.com/EnnepersMinimalSurface.html
when i type the equations for z,y,z it says a syntax error so i obviously do not understand how to construct an expression. (screen capture attached)
Any help/explanation of using this function would be greatly appreciated
thanks so much
Capture.JPG…
mers considering extreme sports reject mainstream retailers and like to check out small stores rather of at chains plus malls. Several smaller retailers discuss trends in sports shoe sales. http://skateszone.com/
Though athletic shoes and sports stores and from doorways retailers have reported somewhat uptick in footwear sales due to the increase in extreme sports, the particular beneficiaries inside the trend are independent surf and skate niche stores.
Some West Coast surf and skate shops stated teenagers and even more youthful Generation Xers are not only rejecting traditional sports, but they're also shunning mainstream retailers and malls meant for smaller niche shops transporting hard-to-come-by brands.
Eddie Miyoshi, district manager at Atomic Garage, a 3-store chain situated in Gardena, Calif., stated the soaring recognition of skateboard footwear has boosted the retailer's total footwear business 20-thirty percent this year, rather of '95.
Skate footwear presently represent 80-90 % of Atomic Garage's shoe sales, while couple of years back, Dr. Martens and Timberland drove the retailer's footwear business.
Like many retailers, Miyoshi pointed to Airwalk since the trend's catalyst.
However, if Airwalk broadened its distribution to larger chains, which are frequently located in malls, only a few skate shoe customers adopted. Rather, many youthful males have switched for your skate shops for additional elusive brands like Etnies, Duffs, and Electricity Footwear by Circus. By refusing to market bigger retailers or sports stores, these brands are increasing their cachet among youthful consumers.
"Kids don't want stuff which have been within the shops,In . Miyoshi added.
Searching ahead, Miyoshi forecasted skate shoe sales will remain strong through spring '97 provided "the [hot] vendors don't auction other [non-particularly shop] retailers."
"Skaters and non-skaters are rebelling against mainstream retailers so on to surf and skate shops for many looks," echoed Mark Richards, co-online sources Val Surf, a 3-store chain situated in North Hollywood, Calif. Soaring sales of skate footwear have driven total footwear receipts up 25 percent this year rather of '95.
"The quantity of that increase might be connected while using exposure of maximum games? I am unsure. [Skate footwear] may also be actually the think about the moment,In . Richards acknowledged. And in relation to getting this right look, youthful customers can be very picky.
"Skateboard footwear is a huge category for people, but we're not able to own the brands, Etnies, Duffs, Electricity and Nice, simply because they won't sell us," stated Mark Anderson, buyer at Chick's Sports, a six-store chain in Covina, Calif. "We have people coming every single day requesting them." Consequently, skate footwear have consistently ongoing to obtain about 5 % of Chick's overall footwear business. http://skateszone.com/the-top-8-best-skateboards-for-beginners-reviews-2017/
Nonetheless, some outdoors, niche sports and sports retailers are noting the growing recognition and coverage of maximum sports will receive a modest impact on footwear sales. Trailrunning footwear and approach/outdoors crosstrainers will be the two groups benefiting the very best inside the recognition. Like the skate shoe business, some retailers realize that styling instead of function frequently drives sales of individuals footwear.
"At this time the merchandise is a lot more visual than function," stated Chet James, gm of Super Jock 'N Jill, Dallas, speaking about trailrunning footwear. Still, James noted the current hype over adventure sports helps draw more customer traffic. "The marketing campaigns and media help bring growing figures of people in, nonetheless they frequently occasions day an issue that increases results on their own account,Inch he conceded.
John Wilkinson, executive vp inside the 85-store chain Track 'N Trail, Eldorado Hillsides, Calif., stated the shop has "seen some activity in approach footwear," but he requested the amount of consumers depend in it commercially sport. And, instead of accelerating total footwear business, Wilkinson speculated elevated sales of approach footwear and trailrunners are gnawing away at traditional hiking shoe and boot volume.
But Dan Bazinet, president of Overland Exchanging, a 34-store chain situated in Westford, Mass., believes the company-new looks have breathed existence for the wilting hiking boot category. "[Approach-type footwear] don't represent the lion's participate the hiking market, nonetheless they have elevated the hiking business and provided us extra sales," Bazinet stated.
He designated Timberland's Treeline Series and Rockport's Leadville line as strong performers. Unsurprisingly, he noted the company-new looks are attractive to youthful consumer base than traditional hikers.
For that month of June, sales of men's hikers were up 49 percent at Overland, rather of June '95, while sales of women's hikers were up 17 % for that month. Bazinet also attributed elevated sales that shops walked inside the hiking business, departing that business for that specialists.
Some retailers draw a good example concerning the hiking boom of two yrs ago combined with the current extreme sport phenomenon. "Plenty of bigger chains will get a specific percent in the industry while [extreme] sports remain a fad because they are selling cost-point type gear," described Steven Carre, assistant hard goods buyer at Adventure 16, a six-store chain situated in Hillcrest.
"However individuals [true enthusiasts] will say `we need real gear' and may shown up at us. That will help us after a while. What Size Skateboard good for an 3 4 5 6 7 8 9 10 11 12 13 14 year old
…
r "virtual partitions" as follows:
What I mean "air walls" here, is derived from the description of the E+ documentation with the header of "Air wall, Open air connection between zones". (Page 17, http://apps1.eere.energy.gov/buildings/energyplus/pdfs/tips_and_tricks_using_energyplus.pdf)
As I understand, the term "air wall" used in E+ here refers to a description of something like "boundary condition" between adjacent interzone heat transfer surfaces, but not a kind of "construction or material" (like air space resistance or air gaps within a wall/double glazing window).
The main purpose of introducing the "air wall", is to simulate or approximate the airflow/convection/natural ventilation effect between multiple thermal zones which are connected by a large opening.
In my previous tests, using HBzones and GB, I managed to create the gbXML file which can be successfully imported to DB (without assigning any constructions within HB). And the adjacency condition can be recognized automatically by DB, even when I did not use the "Solve adjacencies" component in HB - shared surfaces between multiple thermal zones are recognized automatically by BD as "internal - partition"(which are standard partitions, but not virtual partitions).
In order to create/approximate "virtual partition", I need to manually draw a "hole" in the standard partition surface (fig.1&2). Again, the reason why we want to use "virtual partitions"(or "air wall") is that it allows airflow between multiple thermal zones which are connected by large openings and we could get different temperature of the each subdivided thermal zone which compose a large thermal zone.
My question is, if there is a possible way to simulate/approximate this kind of "virtual partitions"(or "air wall") in HBzones or in GB? If so, I would like to test if DB recognizes it or not. Actually, we expect that there is no need to involve any manual operations (like drawing a "hole" in the standard partition surface) in DB, due to an automatic optimization loop.
Thank you!
Best,
Ding
fig.1
fig.2
…
he example file to this file so you can give it a try with any version of Honeybee that you're already using. The only requirement is to have OpenStudio installed as the component is using OpenStudio libraries to parse gbXML files. If you're using the latest version available on github the component is also available under WIP tab.
Why?
The main purpose of developing this component is to save time and effort for importing Revit models for energy and daylight analysis. It bothers me to see a lot of smart people spend a lot of time to just come up with solutions just to get the geometry from Revit to Honeybee for analysis. This component is not solving all the issue but is a first step forward. In an ideal world, the future version of Honeybee, which works both under DynamoBIM and Grasshopper should address this issue but that can take some time to be fully ready!
How?
To use this component you need to Export your Revit model as gbXML and then use the file path to load the file into Grasshopper. There are several resources available online on how to prepare the analytical model in Revit and export the gbXML file. Here is an image for importing the Revit 2017 sample model using the default settings. As you can see the model will be just as good as what your original gbXML file from Revit is.
What can be improved?
Well, there are several items that can be improved and they are mostly not on us. To get it started I add what I think are the 3 main shortcomings and my thoughts on how they can be addressed in the future. Feel free to add what you think needs to be added to this list in the comments section.
1. Revit analytical models and as the results gbXML files, by design, are not intended to be clean. Watch this presentation from the Autodesk University to see the logic behind this approach which in short is it doesn't matter for a large scale early stage energy model. Well, This will be quite a problem for studies that you can do with Honeybee. Included but not limited to daylight and comfort analysis.
The best solution that I can think of, until Autodesk fixes their exporter, is to use Revit Rooms and Spaces and generate a clean model from the scratch. We have already tried this approach in Revit but since the Revit API doesn't provide access to Room openings we had a very hard time to get it to work.
That's why that I opened an idea on Revit ideas to get over this issue. With your support we already have 81 votes, but it hasn't been enough to make them to consider the idea for an official review. If you haven't voted already and you think this will be a helpful feature take a moment and vote so we can have it implemented at some point in the future.
2. There is no way (that I know) to export only part of the model. The way export gbXML is set up in Revit is to export the whole model once together. As a result, if you have a huge model with 100 rooms and you want to get one of the rooms into Honeybee using this component you have to export the whole model, which can take some time, and then import them all back into Grasshopper. To partially address this issue I added an input to the component that allows you input a list of names for rooms that you're interested to be loaded into Grasshopper. You can use the name of the room/space in Revit as an input for the component.
3. The component doesn't import adjacencies, loads, schedules and HVAC systems. I wasn't able to export a gbXML file from Revit with any of this data except for the adjacency, but even if you can do that, the component currently can only import geometries and constructions. I hope we get access to 1 and so we don't have to use the xml file approach at all, but if that takes a very long time then we will add these features to the component.
Happy 2017!
Mostapha…
d the fact that one pipe goes out and one goes in, that the surface normal direction is opposite for the two surfaces? Based on an earlier thread, you should know why by now. The two curves have opposite directions (again!); see the white arrows using Rhino 'Analyze | Direction'?
As before, you can fix that by flipping one curve to match the other. HOWEVER, you connected your curves directly to the 'Divide' components instead of using 'Crv' geometry params - bad form. And as before, you "fixed it" by reversing the list of starting points ('S' input to 'BiArc'). Better like this - 'Crv' params are internalized, no need for Rhino file:
Well, well! That didn't fix the opposite surface normals after all! Trust me, though, using geometry params and being conscious about matching curve directions is "best practice". But I haven't lofted 'BiArc' curves for awhile, it's late and I want to move on. OH! I just noticed that you reversed the 'Z' direction for one half of the 'BiArc' - that explains it:
Moving on... You've basically got it, though I would do it differently - same result, like this:
I haven't really explained surface normal vectors - can you figure it out from here? One more little wrinkle (Normal_2017Mar17b.gh):
…
Added by Joseph Oster at 12:03am on March 18, 2017
ported to Rhino and "set" in Grasshopper, i trim both surfaces from their rectangular bases so that when sDivide is used it creates and distributes the same number of points on each surface.But heres the problems: a) if i use the "trimmed" surfaces with SrfGrid it errors warning: "A point in the grid is null. fitting operation aborted".I'd learned this was caused by "nulls" replacing position Data Items when the rectangular grid(surface base) was trimmed away. So i used Clean Tree which worked removing all nulls, then Shift Paths\Flip Matrix to create line-endpoint pairs for Polyline\Evaluate Curve. I Flattened the last Flip Matrix placing all data items in one source for SrfGrid, like in the working Untrim\CopyTrim definition.This time,.b) SrfGrid errored with: "The UCount value is not valid for this amount of points",.So, i substituted a 356 value, numeric Slider in the Addition B param., and tested its range until a valid UCount was found. Then SrfGrid fitted a surface thru the points, BUT,d) those SrfGrid surfaces are extremely deformed even thought the points preceding it from Evaluate Curve are accurate,SEE: def: "3b-RGH_SurfaceBlend.gh",AND,.a2) if i use Untrim with CopyTrim then SrfGrid works, but since the Jokers limbs WILL be in different surface positions then the blends between the Arm (for example) will rise from its relative FLAT position on the untrimmed Source surface to the Arm on the Target surface, rather than morphing from the Corresponding Arm position on the Source surface,. ..see def.: "4-RGH_SurfaceBlend.gh"So please let me know,..1) how to produce accurate surfaces from SrfGrid in def.: "3b-RGH_SurfaceBlend.gh",. ..(NOTE: BOTH these def's contain 2 indentical, "internalized" surfaces, but if def. 3b can be made to work it will also work with Dis-similar surfaces)2) which component to use or how else to determine the correct UCount value for a specified amount of points(ie:155), re: SrfGrid error: "The UCount value is not valid for this amount of points",.3) how else to force SrfGrid to work with Trimmed surfaces?, AND,..4) how to force intersurface, point-blend correspondence lines: Polylines(PLine) to be connected between correctly! correponding positions (Limbs) on the surfaces?,
Really! appreciate all help, definitions and kind generosity common to this knowledgable membership,
Cheers!,
Jeff…
y case. Here's the thing. There is this subject at my university where we are assigned a famous building and we need to recreate it in Rhino. We're given bonus points if we manage to code some interesting part of it in Grasshopper. So far so good, I'm doing pretty well with Rhino and by far I am happy with the results I've achieved with modelling the given building. Harbin Opera House by MAD is the building I'm trying to model. There is one particular surface:I've built this surface in Rhino and now I'm trying to map pyramids on it. Not only have the pyramids to be different in height, but their height has to be dependent on the curvature of the surface. I'm getting some results but it seems to be exactly the opposite of what I need. I want to have higher/spikier pyramids where my curvature analysis shows red/blue and lower/slopier pyramids where the analysis shows green colour.At the moment I'm not really sure how the code I have works, but it seems that the height of the pyramids is dependent on a distance from a point in space to the projection of the cap-point of a pyramid.Here're my Rhino and Grasshopper files:surface1.3dm
surface1.ghI'd be grateful if someone of you guys could handle my problem. I've got one more issue with this surface, but once I get a solution to the first 1 will let know what the second one is.Thanks in advance and keep well!…
te some implications and questions so I will go one by one:
"Now I would like to use a single VRay material as a template for creating multiple identical materials"I hope this will work, but as VRay does not expose any SDK, I would not guarantee any specific result.
"Now I need to add them to the document material table"This is done with a reference to a document instance, such as the one you get with the code doc.Materials (both in C# and Vb.Net).
"I'm not going to learn C# to modify his script"That's a pity, it would be nice to pass on this troublemaker to somebody else! :)Btw, C# and Vb.Net are very very similar. This script could be written in Vb.Net too.
"Reference to a non-shared member requires an object reference. (line 96)"This only means that you need to access the Materials property on an instance, not on the type (class) name. Change that line using what is written at point 2.
"Do I understand that the material has to be assigned to a particular object in order to enter the Material Table?"No it does not. But if you call the _Purge command it will be removed if it does not have an object that references it.
"Can I assign it to a Layer instead?"You do not need to. But this would be achieved with doc.Layers[whichLayer].RenderMaterialIndex = materialIndex; in C# or doc.Layers(whichLayer).RenderMaterialIndex = materialIndex in Vb.Net.
"Any ideas? A better way to do this?"If you found a way to bypass the VRay SDK not being there, this should work.
"Giulio's component has a type hint defined as a Material"It does not any longer. The hint was there in earlier versions of Grasshopper, but now the hint has disappeared. This is not so bad, and it is also the only way you would be able to use either a Material instance already or a string for a material name.
"How was that done?"Probably it was done in an older version of Grasshopper. But which version are you using?
"I can't figure out how to cast the input as a Rhino.DocObjects.Material, so you can see that I have cast it as a compatible type in the first 2 lines... is there a cleaner way?"That sounds like a good way actually. Be sure your component responds properly when something wrong is inputted, though.Dim mTemp As Rhino.DocObjects.Material = CType(M, Rhino.DocObjects.Material)in one line might also work. See msdn for more conversion operators and functions.
I hope this helps,
- Giulio_______________giulio@mcneel.com…