TB of RAM. I think I'm going to start a GoFundMe campaign to buy one for myself :)
2- The server's cost is about $13 an hour. I get free access to supercomputer through my university and xsede.org because I earned an NSF Honorable mention last March, however, the supercomputers available through both resources are a little complicated for me to use, as opposed to the one available from amazon that has Microsoft server 2012 already installed.
3- I wanted to run 400 annual glare simulations for 400 different views.
4- I tried a to perform annual glare simulation for one view on my Dell XPS that has Intel Core i7-6700HQ processor and 16GB of system memory. The simulation took 2 hours to complete. Radiance parameter ab was set to 6.
5- I wanted to obtain the batch file for each view so I can run them on the server. So I used the fly component to run all 400 simulations and closed the cmd windows, that wasn't bad ( for me at least) because I asked my son to this job for me, he was just glad to help me :)
6- I created one batch file using this cmd command:
dir /s /b *.bat > runall.bat
This created a file with the path to each .bat file. I edited this file in Notepad++ to include the word "start" at the beginning of each line. This was done using the "find and replace" dialogue box.
7- I split my newly created batch file into 3 batch files, each one has about 130 file names and " start" before the file names.
8- installed radiance on my server
9- Ran the first batch file on the server, this started 130 cmd windows performing my simulations, CPU usage was anywhere between 90% to 100% and about 105 GB of RAMs were used.
10. It took about 5 hours to complete all 130 simulations, I expected to run all in 2 hours but can't complain because this would've taken about 260 hours to run on my laptop. After the simulations done I ran the second and then the third batch files ( total of about 15 hours).
11. I got 400 valid dgb files. Couldn't be happier!
…
the use of digital technologies as architectural design tools. The workshop " Computer Aided Design: parametric design and digital fabrication " aims to do some introductory teaching in the use of some of these tools.
The workshop will focus on the use of computational models of parametric behavior for generating architectural forms. The generative capacity of these models it will be tested in the development of designs defined by repetitive non-standard components, based on the parametric control of its variations and series differentiations. This process will be developed by the use of a three-dimensional modeling software - Rhinoceros, associated with an application for visual programming - Grasshopper.
The last day of the workshop is dedicated to the use of digital manufacturing tools in architecture. Part of the work will take place at the facilities of the Institute of Design of Guimarães (IDEGUI) providing for the use of their laboratories and manufacturing CNC machines (computer numerically controlled).
At the end of the workshop, it is intended the students to understand that the use of digital technologies in architecture can overcome representational functions, and their integration in the design conception, analysis and construction enriches the methodology of project development.
Terms & Participants
The workshop will take place at the School of Architecture of the University of Minho (Campus Azurém, Guimarães) and the Institute of Design of Guimarães (Couros, Guimarães).
The workshop is pointed at students who attend the 3rd year and 4th year from MiArq, EAUM.
The maximum acceptance is 20 students and a minimum of 10 students.
Deadline for entries is April 11 and must be performed by eaum.pac@gmail.com.
Program summary :
Day 23 April 14 -20h
Introduction to 3D modeling in Rhinoceros. Regular geometries, ruled surfaces and NURBS surfaces.
Day 30 April 14 -20h
Parametric design in architecture. Introduction to methods of visual programming.
May 1, 9 -13h 14 -18h
Development of a design idea by the use visual programming processes in Grasshopper.
May 2, 9 -13h 14 -18h
Introduction to methods of digital fabrication. Manufacture physical models of the proposals made.
It is expected that this meeting will take place in the IDEGUI labs.
team:
Bruno Figueiredo ( Lecturer, EAUM )
Paulo Sousa ( PhD candidate , EAUM )
Nuno Cruz ( Invited Lecturer , EAUM )
Cláudia Alvares ( 5th year MiArq student , EAUM )
Javier Bono ( 4th year MiArq student, EAUM )
João Amaro ( 5th year MiArq student, EAUM )…
EP output variables are to calculate outdoorAirEnergy?
Thank you very much!
Output variables on the Read EP Results component:[1] totalThermalEnergy=cooling+heating[2] thermalEnergyBalance=cooling (-)andheating (+)[3] cooling= Zone Ideal Loads Supply Air Total Cooling Energy [J](Hourly)=Zone Ideal Loads Supply Air Sensible Cooling Energy [J](Hourly)+ Zone Ideal Loads Supply Air Latent Cooling Energy [J](Hourly)[4] heating= Zone Ideal Loads Supply Air Total Heating Energy [J](Hourly)= Zone Ideal Loads Supply Air Sensible Heating Energy [J](Hourly) + Zone Ideal Loads Supply Air Latent Heating Energy [J](Hourly)[5] electricLight=Zone Lights Electric Energy [J](Hourly)[6] electricEquip=Electric Equipment Electric Energy [J](Hourly)[7] peopleGains=Zone People Total Heating Energy [J](Hourly)[8] totalSolarGain=Zone Windows Total Transmitted Solar Radiation Energy[9] infiltrationEnergy=Zone Infiltration Total Heat Gain Energy (+)andZone Infiltration Total Heat Loss Energy (-)[10] outdoorAirEnergy= ???[11] natVentEnergy=Zone Ventilation Total Heat Gain Energy (+)andZone Ventilation Total Heat Loss Energy (-)[12] operativeTemperature=Zone Operative Temperature[13] airTemperature=Zone Mean Air Temperature[14] meanRadTemperature=Zone Mean Radiant Temperature[15] relativeHumidity=Zone Air Relative Humidity[16] airFlowVolume=[infiltrationFlow] Zone Infiltration Standard Density Volume Flow Rate+[natVentFlow] Zone Ventilation Standard Density Volume Flow Rate+[mechSysAirFlow] Zone Mechanical Ventilation Standard Density Volume Flow Rate+[earthTubeFlow] Earth Tube Air Flow Volume[17] airHeatGainRate=[surfaceAirGain] Zone Air Heat Balance Surface Convection Rate+[systemAirGain] Zone Air Heat Balance System Air Transfer Rate
Output variables on the Read EP Surface Results component:[1] surfaceIndoorTemp= Surface Inside Face Temperature[2] surfaceOutdoorTemp=Surface Outside Face Temperature[3] surfaceEnergyFlow=[opaqueEnergyFlow] Surface Average Face Conduction Heat Transfer Energy+[glazEnergyFlow] Surface Window Heat Gain Energy[4] opaqueEnergyFlow =Surface Average Face Conduction Heat Transfer Energy[5] glazEnergyFlow= Surface Window Heat Gain Energy[6] windowTotalSolarEnergy=Surface Window Transmitted Solar Radiation Energy[7] windowBeamEnergy=Surface Window Transmitted Beam Solar Radiation Energy[8] windowDiffEnergy=Surface Window Transmitted Diffuse Solar Radiation Energy[9] windowTransmissivity=Surface Window System Solar Transmittance…
rights to register the "mapwingis.ocx" file.Francesco, would you be patient just a tiny little bit, so that we could try something else? I would be grateful if you could.
1) Close Grasshopper and Rhino2) Run the Revo Uninstaller Pro and uninstall your MapWinGIS application along with removing all the leftovers from the registry.3) Restart your PC, and once it boots again, make sure that you are logged in as an Adminstrator.4) In your Start menu's search box type: "UAC", which will find your User Account Control Settings. Click on it, and a new window will open. Set the bar on the left to "Never notify".5) Turn off your Antivirus, which ever it is.6) Download the 64 bit version of v4.9.4.2 MapWinGIS.7) Right click on downloaded MapWinGIS-only-v4.9.4.2-x64.exe file, and choose "Properties". If there is "Unblock" button click on it, and then click on "OK". If there is no "Unblock" button, just click on "OK".8) Left double click on MapWinGIS-only-v4.9.4.2-x64.exe file and install it to "C:\dev\MapWinGIS" folder. Choose "Full installation" during installation process!9) In your Start menu's search box type: "CMD". Once the "Command prompt" appears do not left click on it! Instead right click on it, and choose "Run as Administrator".10) A command prompt window will open. Type the following command:
"your_regsvr32_folder_path\regsvr32.exe" /u /s c:\dev\mapwingis\mapwingis.ocx
If command does not result in an error message, then type this one afterwards:
"your_regsvr32_folder_path\regsvr32.exe" /s c:\dev\mapwingis\mapwingis.ocx
11) If no error appeared again, then open your Rhino and Grasshopper and check what Gismo_Gismo component prints from its "readMe!" output.If errors appeared, it would be nice if you could post their screenshots.…
Added by djordje to Gismo at 5:46am on March 27, 2017
tions or components.
Participants will learn concepts of object oriented programming and essential syntax of C# to endeavour into personally extending cad toolsets. The workshop will focus on introducing the .NET language C# and the Software Development Kit (SDK) RhinoCommon.
Topics
- use of Script Component within Grasshopper
- explanation to the .NET Framework
- introduction to RhinoCommon SDK
- basics of imperative / object-oriented programming
- data types, operators, properties
- variables, arrays, lists, enumerations
- methods
- objects, classes
- control structures: conditional statements (if, else, switch)
- control structures: loops (for, foreach, while, do)
- walk-through iterative und recursive code-samples
- use of RhinoCommon Geometry class library: creation, sorting, editing of Geometry (Points, Vectors, Curves, Surfaces)
- adding (baking) geometry to the active Rhino 3DM Document, including attributes (Name, Layer, Colors etc.)
- introduction to the Integrated Development Environment MS Visual Studio Express Edition
- compiling code to dll/gha files (plug-ins) / making your own Grasshopper custom components
Grasshopper wird auf der .NET Softwareplattform entwickelt, und kann ebenso wie das CAD Programm Rhinoceros mit "RhinoCommon", einem Software Development Kit, erweitert werden.
Dieser Kurs richtet sich an Designer, Architekten, Ingenieure und Techniker, welche mit dem grafischen Algorithmus-Modellierer "Grasshopper3d" sowie dem CAD-Programm "Rhinoceros" bereits vertraut sind und einen Einstieg in die Programmierung von Geometrie erlernen möchten.
Der Kurs Grasshopper II folgende Grundlagen:
Kennenlernen der Script Componente
Erläuterung zum .NET Framework
Einführung in RhinoCommon SDK
Grundlagen d. imperativen / objektorientierten Programmierung
Datentypen, Operatoren, Eigenschaften
Variablen, Reihen, Listen, Aufzählungen
Methoden
Objekte und Klassen
Kontrollstrukturen: Bedingte Ausführung, Schleifen
praxisnahe iterative und rekursive Code-Beispiele für generatives Design unter Verwendung der RhinoCommon Geometrie Klassenbibiliothek - Punkt- und Vektorgeometrie erstellen, sortieren, bearbeiten, Flächen und Netze erstellen - Geometrie in das Rhino 3DM Dokument baken, einschließlich Attribute (Name, Layer, Color)
Einführung in die Entwicklungsumgebung MS Visual Studio Express Edition
Kompilieren von Programmerweiterungen (plug-ins) als Komponenten (custom components)
Details, Anmeldung:
www.vhs-stuttgart.de
Trainer Peter Mehrtens
Kursdauer: 3 Tage x 8 h
Freitag, 21.02.2014, 9:00-17:00 Uhr Samstag, 22.02.2014, 9:00-17:00 Uhr Sonntag, 23.02.2014, 9:00-17:00 Uhr Ort: VHS Stuttgart, Fritz-Elsas-Str. 46/48
Teilnahmegebühr 510,00 €…
our own, understand third-party tutorials and process to the advanced sessions.
register for 29€/3hrs
GMT: SAT, 13 DEC 2014 @ 3:00PM / 29€
Introduction to vectors, vectors vs. points, vector addition, cross product, dot product, vector operations, vector display, practical use, planes/frames, normals.
Introduction to domains, t parameter, evaluate curve, boundaries, remap, reparametrize, UV coordinates, evaluate surface.
GMT: SUN, 14 DEC 2014 @ 3:00PM / 29€
Introduction to data trees, graft, flatten, unflatten, tree statistics, cherry picker, simplify, shift path, path mapper, tree item, tree items.
WEBINARS
The webinars are series of on-line live courses for people all over the world. The tutor broadcasts the screen of his computer along with his voice to the connected spectators who can ask questions and comment in real time. This makes webinars similar to live workshops and superior to tutorials. The rese arch Grasshopper® sessions are unique for their thorough explanation of all the features, which creates a sound foundation for your further individual development or direct use in the practice. All sessions are held entirely in English.
PAST EVENTS
…
Added by Jan Pernecky at 2:27am on December 11, 2014
gh, when I bake, the geometry suddenly exists in rhino.
Second, I can seem to figure out how to set default numeric values in the component.
Protected Overrides Sub RegisterInputParams(pManager As Grasshopper.Kernel.GH_Component.GH_InputParamManager)
pManager.AddPointParameter("Focal Point", "FP", "The focal point", GH_ParamAccess.item)
pManager.AddNumberParameter("Focal Point Horiz Dist", "D", "Focal point distance from performance boundary", GH_ParamAccess.item)
pManager.AddNumberParameter("Focal Point Height", "H", "Focal point height above performance boundary", GH_ParamAccess.item)
pManager.AddPointParameter("First Row Start Point", "FR", "Location of first row in tiered seating", GH_ParamAccess.item)
pManager.AddNumberParameter("First Row Horiz Dist", "FRD", "First row distance from performance boundary", GH_ParamAccess.item)
pManager.AddNumberParameter("First Row Height", "FRH", "First row height above performance boundary", GH_ParamAccess.item)
pManager.AddNumberParameter("C Value", "C", "C value", GH_ParamAccess.item)
pManager.AddNumberParameter("Row Width", "RW", "Row width", GH_ParamAccess.item)
pManager.AddIntegerParameter("Number of Rows", "RN", "Number of Rows", GH_ParamAccess.item)
pManager.AddIntegerParameter("Construction Tolerance", "CT", "Construction Tolerance: 1=1in, 2=1/2in, 4=1/4in, 8=1/8in", GH_ParamAccess.item)
pManager.AddNumberParameter("Max Riser Height", "MR", "Maximum riser height allowed", GH_ParamAccess.item)
pManager.AddGeometryParameter("Spectator", "S", "Seated/Standing spectator", GH_ParamAccess.item)
End Sub
Protected Overrides Sub RegisterOutputParams(pManager As Grasshopper.Kernel.GH_Component.GH_OutputParamManager)
pManager.AddLineParameter("Sightlines", "SL", "Sightlines", GH_ParamAccess.list)
pManager.AddLineParameter("C Value", "CL", "Line represents C value height", GH_ParamAccess.list)
pManager.AddLineParameter("Ground Line", "GL", "Ground Line", GH_ParamAccess.list)
pManager.AddLineParameter("Tier tread", "TR", "Line represents tier treads", GH_ParamAccess.list)
pManager.AddLineParameter("Risers", "RI", "Line represents risers", GH_ParamAccess.list)
pManager.AddGeometryParameter("Spectators", "SP", "Seated Standing Spectators", GH_ParamAccess.list)
End Sub
Protected Overrides Sub SolveInstance(DA As IGH_DataAccess)
Dim newLine As New List(Of Line)
Dim newCValue As New List(Of Line)
Dim rowWidthLineList As New List(Of Line)
Dim floorLineList As New List(Of Line)
Dim riserLineList As New List(Of Line)
Dim leghtList As New List(Of String)
Dim newSeated As New List(Of GeometryBase)
Dim inputPoint As Point3d
If (Not DA.GetData(0, inputPoint)) Then Return
Dim viewPointY As Double
If (Not DA.GetData(1, viewPointY)) Then Return
Dim viewPointZ As Double
If (Not DA.GetData(2, viewPointZ)) Then Return
Dim firstRowPoint As Point3d
If (Not DA.GetData(3, firstRowPoint)) Then Return
Dim firstRowY As Double
If (Not DA.GetData(4, firstRowY)) Then Return
Dim firstRowZ As Double
If (Not DA.GetData(5, firstRowZ)) Then Return
Dim cValue As Double
If (Not DA.GetData(6, cValue)) Then Return
Dim rowWidth As Double
If (Not DA.GetData(7, rowWidth)) Then Return
Dim numberOfRows As Integer
If (Not DA.GetData(8, numberOfRows)) Then Return
Dim M As Integer
If (Not DA.GetData(9, M)) Then Return
Dim maxHeight As Double
If (Not DA.GetData(10, maxHeight)) Then Return
Dim seated As GeometryBase
If (Not DA.GetData(11, seated)) Then Return
Call addNewRow(newLine, newCValue, inputPoint, viewPointY, viewPointZ, firstRowPoint, firstRowY, firstRowZ, cValue, numberOfRows, rowWidth, rowWidthLineList, floorLineList, riserLineList, M, maxHeight, seated, newSeated)
DA.SetDataList(0, newLine)
DA.SetDataList(1, newCValue)
DA.SetDataList(2, rowWidthLineList)
DA.SetDataList(3, floorLineList)
DA.SetDataList(4, riserLineList)
DA.SetDataList(5, newSeated)
End Sub
Public Sub addNewRow(---constructor----)
---additional code----
end Sub…