and export the geometry out to VVVV to render it LIVE! RawRRRR. In this case, a digital audio workstation Ableton Live, a leading industrial standard in contemporary music production.
the good news is that VVVV and ableton live lite is both free.
https://www.ableton.com/en/products/live-lite/
i am not trying to use ipad as a controller for grasshoppper. I wanted to work with a timeline (similar to MAYA or Ableton or any other DAW(digital audio workstation)) inside grasshopper in an intuitive way. Currently there is no way of SEQUENCING your definition the way you want to see that i know of.
no more combersome export import workflows... i dont need hyperrealistic renderings most of the time. so much time invested in googling the right way to import, export ... mesh settings...this workflow works for some, for some not ...that workflow works if ... and still you cannot render it live nor change sequence of instruction WHILE THE VIDEO is played. and I think no one wants to present rhinoceros viewport. BUT vvvv veiwport is different. it is used for VJing and many custom audio visual installation for events, done professionally. you can see an example of how sound and visuals come together from this post, using only VVVV and ableton. http://vvvv.org/documentation/meso-amstel-pulse
I propose a NEW method. make a definition, wire it to ableton, draw in some midi notes, and see it thru VVVV LIVE while you sequence the animation the WAY YOU WANT TO BE SEEN DURING YOUR PRESENTATION FROM THE BEGINNING, make a whole set of sequences in ableton, go back change some notes in ableton and the whole sequence will change RIGHT INFRONT of you. yes, you can just add some sound anywhere in the process. or take the sound waves (sqaure, saw, whateve) or take the audio and influence geometric parameters using custom patches via vvvv. I cannot even begin to tell you how sophisticated digital audio sound design technology got last ten year.. this is just one example which isn't even that advanced in todays standard in sound design ( and the famous producers would say its not about the tools at all.) http://www.youtube.com/watch?v=Iwz32bEgV8o
I just want to point out that grasshopper shares the same interface with VVVV (1998) and maxforlive, a plug in inside ableton. audio mulch is yet another one that shares this interface of plugging components to each other and allows users to create their own sound instruments. vvvv is built based on vb, i believe.
so current wish list is ...
1) grasshopper recieves a sequence of commands from ableton DONE
thanks to sebastian's OSCglue vvvv patch and this one http://vvvv.org/contribution/vvvv-and-grasshopper-demo-with-ghowl-udp
after this is done, its a matter of trimming and splitting the incoming string.
2) translate numeric oscillation from ableton to change GH values
video below shows what the controll interface of both values (numbers) and the midi notes look like.
https://vimeo.com/19743303
3) midi note in = toggle GH component (this one could be tricky)
for this... i am thinking it would be great if ...it is possible to make "midi learn" function in grasshopper where one can DROP IN A COMPONENT LIKE GALAPAGOS OR TIMER and assign the component to a signal in, in this case a midi note. there are total 128 midi notes (http://www.midimountain.com/midi/midi_note_numbers.html) and this is only for one channel. there are infinite channels in ableton. I usually use 16.
I have already figured out a way to send string into grasshopper from ableton live. but problem is, how for grasshopper to listen, not just take it in, and interpret midi and cc value changes ( usually runs from 0 to 128) and perform certain actions.
Basically what I am trying to achieve is this : some time passes then a parameter is set to change from value 0 to 50, for example. then some time passes again, then another parameter becomes "previewed", then baked. I have seen some examples of hoopsnake but I couldn't tell that you can really control the values in a clear x and y graph where x is time and y is the value. but this woud be considered a basic feature of modulation and automation in music production. NVM, its been DONE by Mr Heumann. https://vimeo.com/39730831
4) send points, lines, surfaces and meshes back out to VVVV
5) render it using VVVV and play with enormous collection of components in VVVV..its been around since 1998 for the sake of awesomeness.
this kind of a digital operation-hardware connection is usually whats done in digital music production solutions. I did look into midi controller - grasshopper work, and I know its been done, but that has obvious limitations of not being precise. and it only takes 0 o 128. I am thinking that midi can be useful for this because then I can program very precise and complex sequence with ease from music production software like ableton live.
This is an ongoing design research for a performative exhibition due in Bochum, Germany, this January. I will post definition if I get somewhere. A good place to start for me is the nesting sliders by Monique . http://www.grasshopper3d.com/forum/topics/nesting-sliders
…
ers can be applied from the right click Context Menu of either a component's input or output parameters. With the exception of <Principal> and <Degrees> they work exactly like their corresponding Grasshopper Component. When a I/O Modifier is applied to a parameter a visual Tag (icon) is displayed. If you hover over a Tag a tool tip will be displayed showing what it is and what it does.
The full list of these Tags:
1) Principal
An input with the Principal Icon is designated the principal input of a component for the purposes of path assignment.
For example:
2) Reverse
The Reverse I/O Modifier will reverse the order of a list (or lists in a multiple path structure)
3) Flatten
The Flatten I/O Modifier will reduce a multi-path tree down to a single list on the {0} path
4) Graft
The Graft I/O Modifier will create a new branch for each individual item in a list (or lists)
5) Simplify
The Simplify I/O Modifier will remove the overlap shared amongst all branches. [Note that a single branch does not share any overlap with anything else.]
6) Degrees
The Degrees Input Modifier indicates that the numbers received are actually measured in Degrees rather than Radians. Think of it more like a preference setting for each angle input on a Grasshopper Component that state you prefer to work in Degrees. There is no Output option as this is only available on Angle Inputs.
7) Expression
The Expression I/O Modifier allows you change the input value by evaluating an expression such as -x/2 which will have the input and make it negative. If you hover over the Tag a tool tip will be displayed with the expression. Since the release of GH version 0.9.0068 all I/O Expression Modifiers use "x" instead of the nickname of the parameter.
8) Reparameterize
The Reparameterize I/O Modifier will only work on lines, curves and surfaces forcing the domains of all geometry to the [0.0 to 1.0] range.
9) Invert
The Invert Input Modifier works in a similar way to a Not Gate in Boolean Logic negating the input. A good example of when to use this is on [Cull Pattern] where you wish to invert the logic to get the opposite results. There is no Output option as this is only available on Boolean Inputs.
…
ing the maps to the broader community.
At the moment, there are just a few known issues left that I have to fix for complex geometric cases but they should run smoothly for most energy models that you generate with Honeybee. Within the next month, I will be clearing up these last issues and, by the end of the month, there will be an updated youtube tutorial playlist on the comfort tools and how to use them.
In the meantime, there's an updated example file (http://hydrashare.github.io/hydra/viewer?owner=chriswmackey&fork=hydra_2&id=Indoor_Microclimate_Map) and I wanted to get you all excited with some images and animations coming out of the design part of my thesis. I also wanted to post some documentation of all of the previous research that has made these climate maps possible and give out some much deserved thanks. To begin, this image gives you a sense of how the thermal maps are made by integrating several streams of data for EnergyPlus:
(https://drive.google.com/file/d/0Bz2PwDvkjovJaTMtWDRHMExvLUk/view?usp=sharing)
To get you excited, this youtube playlist has a whole bunch of time-lapse thermal animations that a lot of you should enjoy:
https://www.youtube.com/playlist?list=PLruLh1AdY-Sj3ehUTSfKa1IHPSiuJU52A
To give a brief summary of what you are looking at in the playlist, there are two proposed designs for completely passive co-habitation spaces in New York and Los Angeles.
These diagrams explain the Los Angeles design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJM0JkM0tLZ1kxUmc/view?usp=sharing)
And this video gives you and idea of how it thermally performs:
These diagrams explain the New York design:
(https://drive.google.com/file/d/0Bz2PwDvkjovJS1BZVVZiTWF4MXM/view?usp=sharing)
And this video shows you the thermal performance:
Now to credit all of the awesome people that have made the creation of these thermal maps possible:
1) As any HB user knows, the open source engines and libraries under the hood of HB are EnergyPlus and OpenStudio and the incredible thermal richness of these maps would not have been possible without these DoE teams creating such a robust modeler so a big credit is definitely due to them.
2) Many of the initial ideas for these thermal maps come from an MIT Masters thesis that was completed a few years ago by Amanda Webb called "cMap". Even though these cMaps were only taking into account surface temperature from E+, it was the viewing of her radiant temperature maps that initially touched-off the series of events that led to my thesis so a great credit is due to her. You can find her thesis here (http://dspace.mit.edu/handle/1721.1/72870).
3) Since the thesis of A. Webb, there were two key developments that made the high resolution of the current maps believable as a good approximation of the actual thermal environment of a building. The first is a PhD thesis by Alejandra Menchaca (also conducted here at MIT) that developed a computationally fast way of estimating sub-zone air temperature stratification. The method, which works simply by weighing the heat gain in a room against the incoming airflow was validated by many CFD simulations over the course of Alejandra's thesis. You can find here final thesis document here (http://dspace.mit.edu/handle/1721.1/74907).
4) The other main development since the A. Webb thesis that made the radiant map much more accurate is a fast means of estimating the radiant temperature increase felt by an occupant sitting in the sun. This method was developed by some awesome scientists at the UC Berkeley Center for the Built Environment (CBE) Including Tyler Hoyt, who has been particularly helpful to me by supporting the CBE's Github page. The original paper on this fast means of estimating the solar temperature delta can be found here (http://escholarship.org/uc/item/89m1h2dg) although they should have an official publication in a journal soon.
5) The ASHRAE comfort models under the hood of LB+HB all are derived from the javascript of the CBE comfort tool (http://smap.cbe.berkeley.edu/comforttool). A huge chunk of credit definitely goes to this group and I encourage any other researchers who are getting deep into comfort to check the code resources on their github page (https://github.com/CenterForTheBuiltEnvironment/comfort_tool).
6) And, last but not least, a huge share of credit is due to Mostapha and all members of the LB+HB community. It is because of resources and help that Mostapha initially gave me that I learned how to code in the first place and the knowledge of a community that would use the things that I developed was, by fa,r the biggest motivation throughout this thesis and all of my LB efforts.
Thank you all and stay awesome,
-Chris…
ences, so not terribly important in the end. After all, it's not really worth going through a lot of trouble to get a 15% speed increase; 15% faster than slow is still pretty slow.
Also processor speed has pretty much peaked these past few years, there have been no more significant increases lately. Instead, manufacturers have started putting more cores on motherboards, which is something GH unfortunately cannot take advantage of.
Multi-threading (very high on the list for GH2) brings with it a promise of full core utilisation (minus the inevitable overhead for aggregating computed results), but there are some problems that may end up being significant. Here's a non-exhaustive list:
It's not possible to modify the UI from a non-UI thread. This is probably not that big a deal for Grasshopper components, especially since we can make methods such a Rhino.RhinoApp.WriteLine() thread safe.
Not all methods used by component code are necessarily thread safe. There used to be a lot of stuff in the Rhino SDK that simply wouldn't work correct or would crash if the same method was run more than once simultaneously. Rhino core team has been working hard to remedy this problem, and I'm confident we can fix any problems that still come up, though it may take some time. If components rely on other code libraries then the problem may not be solvable at all. So we need to make sure multi-threading is an optional property of components.
There's overhead involved in multi-threading, it's especially difficult to get a good performance gain when dealing with lots of very fast operations. The overhead in these cases can actually make stuff perform slower.
There's the question on what level should multi-threading be implemented. Obviously the lower the better, but that means a lot of extra work, complicated patterns of responsibilities and a lot of communications between different developers.
There's the question on how the interface should behave during solutions now. If all the computation is happening in a thread, the interface can stay 'live'. So what should it look like if a solution takes -say- 5 seconds to complete? Should you be able to see the waves of data streaming through the network, turning components and wires grey and orange like strobe lights? What happens if you modify a slider during a solution? Simple answer is to abort the current solution and start a new one with the new slider value. But as you slowly drag the slider from left to right, you end up computing 400 partial solution and never getting to a final answer, even though you could have computed 2 full solutions in the same time and given better feedback. Does the preview geometry in the Rhino viewports flicker in and out of existence as solutions cascade through the network?
…
and where the decimal place should be.
The reason it only shows the first 5 numbers that make up 1,000,000 is because anything smaller than 100 is considered insignificant when talking about 1 million. Think of it like this if 1 million represents an Olympic size swimming pool then 10 would represent the volume of a full tank of petrol for an average family car. You would have to stand there for an extremely long time to fill up the pool from a petrol pump.
It's important to know that these insignificant digits are still there for the purpose of calculations but are just not being displayed.
There are times when you may want to display these numbers in a format that makes more sense, for these occasions we can use the Format() function.
Format() Function
For versions BEFORE 0.9.0001 the VB Format Function is available through the Expression Components found on the Math Tab > Script Panel
Either by using the F input* or the Expressions Editor found on the Context Menu you can apply a format mask to the x input.
* except FxN
Anatomy of the formatting function above:
Format(..............................) <-- VB function
Format("........................."....) <-- Display String
Format("{0....................}"....) <-- Place Holder for first variable
Format("{0:0.000000000}"...) <-- Format Mask for 9 decimal places
Format("{0:0.000000000}", x) <-- Variable
This can be applied to points and their components:
For versions AFTER 0.9.0001 there is a dedicated Format Component or you can use the Expressions Components successor Evaluate.
For more information on the tags used in the Format Function see these links.
Standard formatting tags Custom formatting tags
WARNING:
If you format a number to be displayed in this way it becomes a string and will no longer have the complete Real number available for calculations. Always use the input to the format function for further requirements in calculations.…
l operations. Aside from its geopolitical position and commercial significance, Thessaloniki has been for many centuries the military and administrative hub of the region, and beyond this the transportation link between Europe and the Levant. A series of design studies will be put forward to rethink the way by which city environment in Thessaloniki have been affecting its’ population according to changing needs and to visualize such urban shifts on a more hyper specific contextualized construction model. Throughout the investigations on the research agenda, current trends on the habits of architectural practice will be re-visited.
Innovative urban interventions informed by bottom-up rules extracted from existing city conditions will formulate the major focus of design proposals. Design teams will be working with simulation tools and digital fabrication methods throughout the design research phase. The design brief will be initially explored through the combinatorial use of different computational design tools. Methods of connecting form‐finding methods with form‐making techniques will be investigated. Various manufacturing techniques enabling a hands‐on experience on the diverse range of digital fabrication systems will formulate the starting point for the physical tests. Finally, the design and fabrication of a one-to-one scale pavilion will unify the goals of the programme.
Prominent features of the programme / skills developed:
- Participants will be part of an active learning environment where the large tutor to student ratio (5:1) allows for personalized tutorials and debates.
- The toolset of AA Thessaloniki includes Autodesk Maya, Rhinoceros, Grasshopper and Arduino.
- Participants will have access to digital fabrication tools such as 3-axis CNC router, laser-cutter, and 3d-printer.
- Design seminars and lecture series will support the key objectives of the programme, disseminating knowledge on new design anatomies including machinic control, computational space, and complexity in systems, and innovative urban design approaches.
Eligibility: The workshop is open to architecture and design students and professionals worldwide.
Accreditation: Participants receive the AA Visiting School Certificate with the completion of the Programme.
Fees: The AA Visiting School requires a fee of £600 per participant, which includes a £60 Visiting membership fee. The deadline for applications is 15 October 2015. No portfolio or CV is required.
Discount options are available. Please contact the AA Visiting School Coordinator for more details.
Online application link:
https://www.aaschool.ac.uk/STUDY/ONLINEAPPLICATION/visitingApplication.php?schoolID=316
Programme Director:
Alexandros Kallegias (AA Greece VS Director): alexandros.Kallegias@aaschool.ac.uk…
es at the beginning. But as I make changes to the input (or just hit the recompute button) the time it takes to execute increases. This has happened to me with other scripts I've written with the python component. Why does this happen? And how do I fix it? Does python hold onto data from one execution to the next? The only solution I have found is to relaunch Rhino. Even if I copy the component into a fresh grasshopper canvas, the computation time does not return to original.
The images below illustrate the time increase. I simply hit the recompute button between each pass. All inputs remain the same the whole time. There are 6400 curves being projected. I will say that with fewer curves, the increase in time is nonexistent or perceivable. (I have 24 GB RAM and it is did not even reach 50% of usage during the tests)
My python code:
import ghpythonlib.components as ghcompimport ghpythonlib.parallel
def project (tempc): tempresult=ghcomp.Project(tempc,B,D) return tempresult
a=ghpythonlib.parallel.run(project,C,True)
I have attached the GH file with the inputs internalized if anyone wants to try for themselves.
Pass 1= 444ms
Pass 5= 610ms
Pass 10= 908ms
Pass 15= 1.2s
Pass 20= 1.4s
…
Added by Lawrence Yun at 3:19pm on December 10, 2014
esentar Digital Process: Generative Design Technologies Workshop; Taller especializado que se llevara a cabo en 4 de las ciudades mas importantes de la republica mexicana [Puebla] [Mexico DF] [Guadalajara] [Leon] en Enero y Febrero de 2012. http://gendesigntech.wordpress.com/
Enfocado principalmente a arquitectos, diseñadores industriales, diseñadores de interiores, Urbanistas, Artistas digitales, estudiantes y profesionistas afines al diseño; este Workshop tiene como objetivo proporcionar a los participantes los conocimientos y recursos tecnológicos que les permitan desarrollar los elementos de un proyecto desde la concepción hasta su aplicación de manera completa. Apoyándose en un conjunto potente y flexible de plataformas, los participantes aprenderán a generar, analizar y racionalizar morfologías complejas, formas orgánicas libres y algoritmos computacionales avanzados así como a producir visualizaciones fotorealístas aplicables en diversos proyectos de Diseño. A lo largo de 5 dias de intenso trabajo, exploración y retroalimentación los participantes seran guiados en el desarrollo de un flujo de trabajo mas dinamico, que les permitira explotar al maximo el potencial de las herramientas y potencializar sus habilidades, aptitudes y capacidades. Instructores: Leonardo Nuevo Arenas [Complex Geometry] José Eduardo Sánchez [DesignNest] Daniel Camiro/Luis de la Parra [Chido Studio] http://issuu.com/chidostudiodiseno/docs/digprowork Conoce el programa aquí. http://gendesigntech.wordpress.com/program/ Para registrarte por favor visita. http://gendesigntech.wordpress.com/registro
…
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…
ing results and I think it is based on the assumption of small displacements. That’s why I want to try with LaDeform.
But doing this I met some problems. I tried to experiment it on the small examples that are provided with Karamba:
1.LaDeform in load-controlled behavior
I know Karamba has mainly been created make form-finding and not properly precise calculations, but I’d like to evaluate deformations of my structure under certain loads (load-controlled). It is said to let it in Default value for MaxDisp (-1).
[Rhino view for deflection of the rope]
In this example derived from a Karamba example (Large_Deformation_Rope.gh), the programs shows different ways to get approximately equal max deflection. But, getting into it, I realized Load Multiplier for gravity is different from one model to another (-3.237 for Analyze TH1 and -134 for LaDeform). So what is the interest of the example if the quite similar shape of deflections are not got under the same loadings? (quite different loadings indeed)
Doesn’t it show on the contrary that LaDeform algorithm does not work properly, if you need to change the load multiplier?
The Grasshopper file is shown below.
2.MaxDisp
When I use the model is “max disp”, I command the deformation, but how can I get the value of the virtual force exerted (which I don’t know because it is now imposed)? What is its link with the imposed deflection?
Otherwise I can’t figure how to use it with displacement-controlled loading
3.Iterative process
As it seems impossible to use LaDeform process, I tried to test it by iterations, as you recommend it on the forum, saying that it is equivalent to an iterative Analyze Th1 process.
I tried to reproduce this loading but the result is not very enthusiastic as you can see. The Rhino file shows the progressive loading, with the corresponding Grasshopper files, where I
- disassemble the model,
- get the previous deformed model
- put in another part of the load,
- re-assemble and then calculate it on the previous deformed shape.
Do you have any idea why the answer is not the same ? (LaDeform seem to give like 5 times less for the same loadings) (and even controlling it by displacements the shapes do not fit the principle of the algorithm would let think)
[RhinView for Iterative process]
First step by analyze Th1, and result by LaDeform
4.Analyze Th1 after LaDeform?
Some tutorials of Karamba show that an analysis with Analyze Th1 is sometimes made immediately after a calculation in large deformations. What is its reason? It seems to sometimes change considerably the result. What is the sense of such an operation? Would it mean that LaDeform is not trustworthy?
ð My question is then: is there a way to make the use of LaDeform for other purposes than form-finding affordable and coherent? If I mistake using it, where?
Thank you very much for your help,
…