(http://www.food4rhino.com/app/quelea-agent-based-design-grasshopper) take like 40 seconds when the toggle activates to go from one end of the ramp to another.
With proximity 3d i'm analyzing each instance the agents are closer than x units. In picture 3 we can see that in 212 instances the agent are closer than those x units.
Finally all the genes that controll the ramps are connected to the G of octopus component and one of the conflicting objectives connected to the O of octopus component is the number of instance quelea agents get close.
So the thing I need is to iterate the ramps controling the genes with octopus but activating the boolean toggle (quelea run) each time the ramps are modified so the agents take 40 seconds to perambulate the environment, analyze the instance they get close and let octopus iterate again searching for a optimized environment.
…
complicated than it seems as I have an event and a subscriber method receiving data from a serial port.
In the code below, the strings received within myReceivedLines appear when connecting with the serial port (when connecttodevice is true). However they disapear when I launch another command (when homeallis true).
As you recommended in your reply, I have added the field called myReceivedLineswithin the class so that I could use the method String.Add() to all the feedback received and commands sent.
Why does the feedback dispear when a command is sent? Is the string going to myReceivedLine disappearing because they happen within a subscriber method or is it related to the DA.SetDataList() method used to assign myReceivedLinesto the output?
Many thanks!
public class SendToPrintComponent : GH_Component { //Fields List<string> myReceivedLines = new List<string>(); SerialPort port; //subscriber method for the port.DataReceived Event private void DataReceivedHandler(object sender, System.IO.Ports.SerialDataReceivedEventArgs e) { SerialPort sp = (SerialPort)sender; while (sp.BytesToRead > 0) { try { myReceivedLines.Add(sp.ReadLine()); } catch (TimeoutException) { break; } } } protected override void SolveInstance(IGH_DataAccess DA) { //Opening the port if (port == null) { string selectedportname = default(string); DA.GetData(1, ref selectedportname); int selectedbaudrate = default(int); DA.GetData(2, ref selectedbaudrate); //Assigning an object to the field within the SolveInstance method() port = new SerialPort(selectedportname, selectedbaudrate, Parity.None, 8, StopBits.One); //Enables the data terminal ready (dtr) signal during serial communication (handshaking) port.DtrEnable = true; port.WriteTimeout = 500; port.ReadTimeout = 500; } //Event Handling Method bool connecttodevice = default(bool); DA.GetData(3, ref connecttodevice); if (connecttodevice == true) { if (!port.IsOpen) { port.DataReceived += new SerialDataReceivedEventHandler(DataReceivedHandler); DA.SetDataList(0, myReceivedLines); port.Open(); } } else if (port.IsOpen) { port.DataReceived -= new SerialDataReceivedEventHandler(DataReceivedHandler); port.Close(); } if (port.IsOpen) { DA.SetData(1, "Port Open"); } //If the port is open do all the rest if (port.IsOpen) { bool homeall = default(bool); DA.GetData(5, ref homeall); //Home all sends all the axis to the origin if (homeall == true) { port.Write("G28" + "\n"); myReceivedLines.Add("G28" + "\n"); DA.SetDataList(2, myReceivedLines); } } else { DA.SetData(1, "Port Closed"); } }}…
ond class to my c# Project to get a second Component, which doesn´t work. when i load the .gha file, only my first component appears.
so i have a C# Project with two classes like this:
namespace myUtilities{ public class My1stComponent : GH_Component { public My1stComponent() : base("My1stComponentName", "MFC", "do something", "myTab", "my1stToolBox") { } protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { //myInputs } protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { //myOutputs } protected override void SolveInstance(IGH_DataAccess DA) { //myAlgorithm }
public override Guid ComponentGuid { get { return new Guid("88e6231b-d998-4de2-85dc-451b0158c599"); } }
namespace myUtilities{ public class My2ndComponent : GH_Component { public My2ndComponent() : base("My2ndComponentName", "MSC", "do something else", "myTab", "my2ndToolBox") { } protected override void RegisterInputParams(GH_Component.GH_InputParamManager pManager) { //myInputs } protected override void RegisterOutputParams(GH_Component.GH_OutputParamManager pManager) { //myOutputs } protected override void SolveInstance(IGH_DataAccess DA) { //myAlgorithm }
public override Guid ComponentGuid { get { return new Guid("c5aaf8ea-3a02-4d6e-86ee-a8e35ba2b96d"); } }
Can anybody tell what´s wrong about that?
Another Problem i have is to to get my own icon. i added one to my c# Project like this:
protected override Bitmap Icon { get { return myUtilities.Properties.Resource_icon.myFirstComponent; } }
In Rhino 5 my icon appears, but not in rhino 4 :(.
Thanx for your answers.
…
Added by max wittich at 8:00am on September 17, 2012
t the maximum potential with the bridge BIM+PARAMETRIC DESIGN ;D
During this Intense Week, we will learn about the power of Rhino + Grasshopper + ArchiCAD with Professional and Useful examples for our Normal Working day :D
You will get Advanced Library Files + Personal Web + Knowledge and Skills to start using this incredible Methodology ;D
Also, the week is having Lectures from different Experts sharing their Computational Working Experiences ;D And Jam Sessions! opening the door to 5 interesting topics to research, learn and experiment together :D
2020 is your YEAR ;D !!!
Complete details and registration……
llet Distance]
[Slider=0..1..10]-->[D][Fillet Distance]
[Slider=1..5..20]-->[F][Unit Z]
[Fillet Distance][C]-->[B][Extrude]
[Unit Z][V]-->[D][Extrude]
This still leaves the problem of having more than one of a single component on the canvas. Referral can be made unambiguous by simply picking the most recent component with the same name. But how do you indicate you want a second Polyline component?
Possible solutions:
Separators in the text:[Point=SetMultiplePoints]-->[V][Polyline]----------------------------------[Point=SetMultiplePoints]-->[V][Polyline]
Keywords or symbols to indicate the creation of a new component rather than the re-use of an existing one:new [Point=SetMultiplePoints]--> new [V][Polyline]new [Point=SetMultiplePoints]--> new [V][Polyline]
(2) is a lot more flexible and (1) may not work at all as it will prevent any reuse above and below the separator.
--
David Rutten
david@mcneel.com…
d react in length to the variation of their respective angle deviation from the sun.
For the moment I have established a way that depending on Bigger than/Smaller than X value, there is a dispatch of data to produce to types of panel lenghts. As you can see on the image.
But I would be interested to find the way to organize the list of all angles and classify them in groups like 5 packages of 20 degrees deviation. So, the panels deviated 16,3 and 27,9 degrees would go in the package of 15-35º, for example, and the 33,1 would go in the 35-45º...etc..
And the question would be to assign the different groups of angles, to given positions for the vectors that define the panel surfaces.
I am confused at how I should tackle this problem. Is it a question of dividing domains? Or creating sublists? But then, how can I assign the data to a set of positions? Dispatch only works with A/B..
And if so, how could I limit the positions of the vectors that define the surfaces, to a min and max length that would not overlap out of the base pattern?
These are huge questions, eh? But I'm sure that someone has tackled this problem before...
Looks like an accumulation of pretty standard problems,..but all together!
Thanks a million for any examples or hints on how this could work!
M.A.
StepStudies_20100815.3dm
StepStudies_20100815.ghx
…
ooking for an efficient way to perform glazing of complex shapes.
I've only followed the Energy modelling workshops so far so i may have missed some essential components or workflows to achieve my needs. But i've made an attached definition with all my current attempts to get a proper HBzone with the numerous windows faces i will always have to deal with in this project.
I first thought that i was not using the HBObjWGZ correctly, then after some readings it was maybe an upgrading issue, then effectively i had my Therm 7.5 that needed to be reinstaled, but then ... I must be missing an essential HB tricks or workflow i guess ...
So I divided my attempt in two series :
- The Serie 1 : is a simplier version of the project step i'm working on but i'd be glad to achieve it first !
- The Serie 2 : is the real final direction of the project, which consist in sorting/dispatch faces to windowon one side and to an other material on the other, according to the winter sun and a pourcentage param.
Despite it is more complicated than the Serie one, it seems seems to create the same diversity of issues.
Until now, with the 5 different combinations of Serie 1, and the 3 of Serie 2, with and without using the different Glazing/window components, here are the logs i got from both HBZone component or OpenStudio component:
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** BuildingSurface:Detailed="00073E23257843B6A948", invalid Construction Name="ETFE" - has Window materials.">> Has to deal with the way i'm trying to assign too early a customized EPConstruction material ? Done it wrong ? I tried to reload it in the library but doesn't change anything...
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** BuildingSurface:Detailed="000579CD749E46DFA5EA", invalid Construction Name="EXTERIOR WINDOW" - has Window materials.">> Is it an issue in the way i define my surfs both as "WINDOW" (5) for srfType and Outdoors on the same component ?
From Create HBZone -"1. Solution exception:'EPZone' object has no attribute 'shdCntrlZoneInstructs'"
>> Happens when i try to introduce my ETFE EpMaterial after creating my first HBZone, with a Set EP Zone Construction, so this material seems to be not working either before and after trying to create an HB Zone
From Create HBZone- "1. Solution exception: 73df51a3b2144b1e858b has been moved, scaled or rotated."If you need to move or rotate a Honeybee object you should use Honeybee move, rotate or mirror components. You can find them under 12|WIP tab.
>> >> wich seems to exist in some on other thread Here and was a coding bug supposed to be fixed.
And last but not least ...
From OpenStudio - "1. The simulation has not run correctly because of this severe error: ** Severe ** checkSubSurfAzTiltNorm: Outward facing angle of subsurface differs more than 90.0 degrees from base surface.2. The simulation has failed because of this fatal error: ** Fatal ** GetSurfaceData: Errors discovered, program terminates" .
I'm attaching the file with each attempt in this post. The definitions are disabled and the log already copied separatly so there is no need to compute each of them to see what's wrong.
If someone from the beginner to one of the Kings of HoneyBee has any relevant answer/solution to this attempt with complex geometry Issue it will be really nice for me so i could to move forward !!
Thanks in advance guys and have a great day !
…
this occasion, but it could be converted for DT in no time). Requires some minutes more as regards ... some things, but the usual update is due to some days.
Bad news: it's C#
Good news: User's Manual :
1. That thing (the C#, not me) after sorting (in a "sequential way", so tho speak) the panels (their order was chaotic) allows you to start the massacre by locating a focus of interest (and the user controllable +/- Range derived from it).2. The Range is variable (obviously) and takes care not to exceed the indices of the panel list (OK, that's elementary).
3. If you click the right button (Sadistic Q: where is it? he he) things are deleted and a new constantly self-updating list is your new List. Thus the massacre of panels is totally controllable. An autoZoom thing is also included (free of charge, but it's a bit nerve braking). Zoom factor is variable as well.
4. Then you move over (via the index slider) and start the massacre again. Notice the change of Range.
5. If you turn begin to false (initialization) and then begin to true > start all over again.
6. The other C# thing allows you to increment the index slider in a rather more convenient way. It's a bit weird: it uses delegates (A delegate is an object that knows how to call a method) and events (An event is a construct that exposes just the subset of delegate features required for the broadcaster/subscriber model - but don't ask what this means, he he) in order to talk with your slider (with a defined NickName) and perform the required value control.
NOTE: without realizing it you've just (indirectly) asked one of the most important questions even exposed in this Noble Forum. I hear you : what question? Well ... wait some days for the mother of all threads: "Total control in collections on a per Item basis"
may the Force (the dark option) be with you (and me)
best, Peter…
should follow the instruction which mostapha has wrote in https://github.com/mostaphaRoudsari/ladybug/blob/master/resources/I...
Instructions for Installing Ladybug + Honeybee: (Follow steps 1-6 for basic functionality and 1-11 for full functionality) 0. If you have an old version of LB+HB, download the file here (https://app.box.com/s/ds96em9l6stxpcw8kgtf) and open it in Grasshopper to remove your old Ladybug and Honeybee version. 1. Make sure that you have a working copy of both Rhino and Grasshopper installed. 2. Open Rhino and type "Grasshopper" into the command line (without quotations). Wait for grasshopper to load. 3. Install GHPython by downloading the file at this link (http://www.food4rhino.com/project/ghpython?ufh) and drag the .gha file onto the Grasshopper canvas. 4. Select and drag all of the files in the "userObjects" folder (downloaded with this instructions file) onto your Grasshopper canvas. You should see Ladybug and Honeybee appear as tabs on the grasshopper tool bar. (If you are reading this instruction on github you can download them from http://www.food4rhino.com/project/ladybug-honeybee) 5. Download the files at this link (https://app.box.com/s/bh9sbpgajdtmmystv3n4), unzip them and copy the contents to both C:\ladybug and C:\Users\[yourUsername]\AppData\Roaming\Ladybug. 6. Restart Rhino and Grasshopper. You now have a fully-functioning Ladybug. For Honeybee, continue to the following: 7. Install Radiance to C:\Radiance by downloading it from this link (https://github.com/NREL/Radiance/releases/download/4.2.2/radiance-4...) and running the exe. 6. Install Daysim to C:\DAYSIM by downloading it at this link (http://daysim.ning.com/page/download) and running the exe. 8. Install Energy Plus 8.1 to C:\EnergyPlusV8-1-0 by going to the DOE website (http://apps1.eere.energy.gov/buildings/energyplus/energyplus_downlo...), making an account, going to "download older versions of EnergyPlus, selecting 8.1 and running the exe. 9. Copy falsecolor2.exe (http://pyrat.googlecode.com/files/falsecolor2.exe) and evalglare.exe (http://www.ise.fraunhofer.de/en/downloads-englisch/software/evalgla...) to C:\Radiance\bin 10. Download the OpenStudio Libraries (https://app.box.com/s/y2sx16k98g1lfd3r47zi) and unzip them to C:\ladybug\OpenStudio. 11. You now have a fully-working version of Ladybug + Honeybee. Get started visualizing weather data with these video tutorials (https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDX...).
It works for me..
Agus…
Rubicon (ii.e. some programming language [I would strongly recommend C#] > the Dark Side > years of pain + tears > hell or heaven?).
Back to that pile or worms of yours (I hate "simple" cases, he he).
0. if you want rounded lips ... Styrofoam is the only solution (+ sanding [buy a mask and some decent cigars ... path is long and hilly]). if not > goto 5/6.
1. by what means you think that you can shape Styrofoam? Do you have access to some CNC foam cutter? Or the only tools that you have are ... 2 hands and a knife? (or a thermal cutter). Accuracy is a BIG issue here: chances are that panels won't "fit". Solution is available in the forthcoming V3.
2. male "protrusions" on Styrofoam is kinda 3rd marriage > AVOID at any cost > this would end up in tears.
3. female ones are safe ... thus we need a proper "insert stripe" that must be compatible with the Styrofoam adhesive and strong enough to hold the pieces until the glue cures (it takes time, there's no instant Styrofoam adhesives around). Maybe aluminum (hard to cut by hand) or balsa (very expensive) or plywood (best option).
4. Some CNC foam cutters they can't shape the female "crevices" > be prepared (a thermal tool may(?) cut the mustard).
Note: panels made with Styrofoam look miserable because reality and theory differ. They also look miserable as well (and kitsch and miserable).
5. making the panels with (marine) plywood ... well this yields far superior accuracy and therefor aesthetics but (a) yields max panel thickness constrains, (b) introduces max panel dimensions constrains (c) yields packing issues [waste material] and (d) requires a totally different "connection" approach: it doesn't make sense to do some female crevice ... unless the plywood is very thick (expensive + heavy).
Note: Designing (pro option) self supporting "rib" reinforced sandwich composite panels ... well this is a bit far and away from what you can handle at present time.
So ... I've suspended the male/female thingy until you decide the final policy: it's the material/detailing that should dictate the method(s) AND the whole design and not the other way.
This is what we call bottom-top design approach (dinosaur Architects follow the top-bottom: disastrous + naive + naive + naive + avoid).
6. Plan ZZTop: make a stand alone autonomous perimeter frame per panel (marine plywood: imagine "thickening" these abstract beams shown inwards per panel) then join these frames by means of bolts (easy) and fill the "gaps" with Styrofoam (hmm). Note: you can reinforce the frames by a variety of means (say: a secondary "beam" sub-structure) achieving a rather elegant all overall solution.
This is the best solution by roughly 666 miles.
…