4 explode the text
5 select the exploded text, which are now curves, and the border from step 2 and use the planarsrf command again
6 make your surface using the two curves at top and bottom and a section. Use the sweep2 command
7 select your negative text surfaces and use the flowalongsrf command
maybe the scale of the text can be edited by the size of the surface or of the text but I bet you can figure that out! good luck!…
s not imported in the workflow, there is no problem for the intersectMass component, no matter how we change the random seed to generate different groups of breps with overlapping surfaces:
2. However, once we add the mass2Zone component into the workflow, we have this problem as posted here.
3. As you pointed out, the warning is given when "Hzones == True" which only happens when one of the objects in _bldgMassesBefore is recognized as a zone already stored in HB Hive. So, I added one line after line257 to print out the zone name:
4. It seems for the cases that the intersecMass component shows warning, there is a zone name printed:
5. Whereas for those cases that the intersecMass component shows no warning, there is no zone name printed:
6. Even if the zone creation is turned off, there is still zone name printed for cases that intersectMass is unable to process:
So, I agree with you that this might be related to the HoneyBeeHive which stores honeybee zones.
Maybe whenever upstream geometries change that are connected to either intersectMass or Masses2Zones, the HoneyBeeHive has to be cleaned up and zone objects inside need to be recreated.
Hope Chris and Mostapha can kindly take a look and advise if this is the source of the issue.
Thanks.
- Ji…
n be moved to the appropriate place. The files are sensitive, but I can email them directly to you if you like.
1/ Contouring (and also Brep/Plane Intersection) generates non-closed curves from a closed brep (the screenshot actually shows a surface instead of a brep, but the same thing happens):
2/ Contour generates non-planar curves (one is also open, see below). This is very disturbing because it cannot be used to create a 'boundary surface'.
3/ Offset doesn't return all results. This seems like more of a rhinocommon problem. It always returns a valid result, but often not the one I want. Better would be to return all results and let me choose what I want.
4/ Fillet issues. See image below, the fillet component works fine up to a certain radius and then the one on the right disappears completely (presumably the radius is too large so it gives up). However, if I use the FilletAtParameter component, the fillet works at each of these points but it won't do all of the fillets at once (regardless of how I arrange the data tree). My work around at this point is to get it to fillet each of the sharp bits separately and then RegionUnion all the curves together, which is incredibly slow.
5/ There is no ExtrudeTapered component, so I wrote a quick VB.Net component to expose this functionality. Firstly: I cannot for the life of me figure out what the "Base Point" input does. This seems to have no impact on the result and the documentation is missing. Secondly: giving it a non-unitized vector does very strange things to the result.
Thank you for your help!
Steven
…
or Ladybug and Honeybee:
1. Our recent presentation at IBPSA-NYC is now available online. We do an overview of what Ladybug and Honeybee capabilities with a short live demo:
part 1: https://vimeo.com/107501953 - part 2: https://vimeo.com/107502226
2. Chris recorded a great set of tutorials together for "Getting Started with Ladybug" that walks you through several components in Ladybug: (https://www.youtube.com/playlist?list=PLruLh1AdY-Sj_XGz3kzHUoWmpWDXNep1O)
3. He (Chris) also recorded another great set of videos for comfort tools that he is currently developing for Ladybug and Honeybee: (https://www.youtube.com/playlist?list=PLruLh1AdY-Sho45_D4BV1HKcIz7oVmZ8v)
4. With the help of Mohammad, we finally uploaded the videos from the workshop that I led at Penn few months ago which covers Daylighting with Honeybee: (https://www.youtube.com/playlist?list=PLkjfDmSc5OryXkWSt57ltJFU4qXD5ss1v)
5. Finally, Chris also started a series of videos on Energy Modeling with Honeybee that you can watch here: (https://www.youtube.com/playlist?list=PLruLh1AdY-SgW4uDtNSMLeiUmA8YXEHT_)
There are couple of stuff which are coming next, soon:
1. So Young is modifying the videos for the Ladybug workshop and once they are ready, we will upload them.
2. I will be capturing a number of videos for developers soon. We are so excited to see all the new developers joining the team and we understand the need to support you to get started. I hope these videos can help you to understand the development logic and get you started with the development.
OK. Now if you have access to Internet, which I supposed you do as you are reading this online, you have no excuse not to learn Ladybug and Honeybee. :)
Let us know your comments and suggestions.
Cheers, Mostapha…
this was about some boring building I wouldn't respond ... but here we are talking sardines.
Here's my take on that matter:
1. The 4 C# first create/use a nurbs, then define some random planes (and transformations) and then (a) either they place some humble stripes or ... er ... (b) sardines as instance definitions (NOTE: Load Rhino file first).
2. All important decisions are the ones in yellow groups.
3. You control what you get via this (priority on stripes or sardines? that's the 1M Q):
4. If you decide for sardines (the right thing to do) then you must ENABLE the Sardiniser(C)(tm)(US patent pending) as follows:
5. The vodkaFactor on that Sardiniser C# adds some spice in the sardine placement (it does that by altering the priority on the "composite" transformation in use: first randomly rotate then planeToPlane .... or the other thing?).
6. Only the finest Da Morgada sardines are used in this definition:
7. Spot the WARNING in the filter related with what sardine to choose > do it wrong and no hard disk on your workstation > no risk no fun > sorry Amigos, he he.
8. 1M question for you all: why placing sardines (it's real-time you know) is WAY faster than creating these humble stripes?
9. Although the sardines are placed in real time as regards your CPU ... the critical factor is your GPU (display mode: rendered).
10.Still WIP (dancing sardines in the next update).
have some sardine fun, best, Lord of SardineLand…
use Google's API, especially if you'd like to achieve a great quantity of data without overloading Google's servers.
I used a way to request data without overloading Google's servers by using a tiling method. Obviously, this component respects the limit of 2500 requests per day.
This is how the component works:
1) set one point and its coordinates
2) generate surfaces by using isotrim component (Basically, each sub-surface is a request)
3) set the number of division of each surface and the resolution of Google static maps
4) run, move points and generate surfaces with surface from points
5) apply textures to the surfaces
In the image below another small example:
I was thinking that this should be useful for wind simulation with Butterfly, maybe.
Best
Antonello…
hat differ in shapes, sizes and height the facade would be a mess. Some spaces need some light while other can't have any. I would like to have full freedom of creation inside the building, to make it as functional as possible. Thats why i decided the parametric "skin" solution would be best. Since the location has industrial past (factories made of brick) i decided that brick would give interesting result.
I tried creating the definition on my own but since i lack skill in GH i got some problems (especially multiplication of bricks and the diffrence between each "level" (half a brick on y axis) caused problems for me.
I post my simple sketch explaining the idea of definition i would like to create (sorry about quality):
1 - Brep - I would like to use 25x12x6cm (classic brick) but as well experiment with diffrent shapes - like the one on the right with hole inside - that would give more light. Thats why i think the best solution would be using brep for this definition.
2- Multiplication - biggest problem for me - I don't know how tall the wall would be, what will be the final shape of Brep (brick) and that's why i would like to manipulate this with sliders as well. All the walls are flat (maybe it would be easier to use surface?). As i managed to multiply the bricks easy way i don't know how to gain control over height of the wall - for example that it is 30 bricks high, but has each second row moved on x axis by the distance of 1/2 brick. I tried using Series but with no success. Could you help me with that please?
3 - Rotation - i would like to use image sampler for that so i can "paint" where i want more sun and where i dont need it at all (black and white). The rotation has to be limited to 180 degrees as well. Obviously i didn't get here yet, but i never used image sampler so if you could give me some advice how to use component and how to create such images i would be really grateful.
4 - More of a concept thing - since the connection angles differ from 90 degrees i will have to figure out how to connect the parts of the wall at sides ;).
I would like to ask you for help with the defintion, since i am totally stuck at step 2. I post what i came up with so far. Thank you for your time and help!
PS. I post an image that is pretty similar to one of options i would like to check for my building.
…
oftware connections built from the initial seed of the project. As always you can download the new release from Food4Rhino. Make sure to remove the older version of Ladybug and Honeybee and update your scripts.
This release is also special since today it is just about 3 years (3 years and 2 weeks) from the first release of Ladybug. As with any release, there have been a number of bug fixes and improvements but we also have some major news this time. In no specific order and to ensure that the biggest developments do not get lost in the extensive list of updates, here are the major ones:
Mostapha is re-writing Ladybug!
Ladybug for DynamoBIM is finally available.
Chris made bakeIt really useful by incorporating an export pathway to PDFs and vector-based programs.
Honeybee is now connected to THERM and the LBNL suite thanks to Chris Mackey.
Sarith has addressed a much-desired wish for Honeybee (Hi Theodore!) by adding components to model electric lighting with Radiance.
Djordje is on his way to making renewable energy deeply integrated with Ladybug by releasing components for modeling solar hot water.
There is new bug. Check the bottom of the post for Dragonfly!
Last but definitely not least (in case you’re not still convinced that this release is a major one) Miguel has started a new project that brings some of Ladybug’s features directly to Rhino. We mean Rhino Rhino - A Rhino plugin! Say hi to Icarus! #surprise
Before we forget! Ladybug and Honeybee now have official stickers. Yes! We know about T-Shirts and mugs and they will be next. For now, you can deck-out your laptops and powerhouse simulation machines with the symbology of our collaborative software ecosystem.
Now go grab a cup of tea/coffee and read the details below:
Rewriting Ladybug!
Perhaps the most far-reaching development of the last 4 months is an effort on the part of Mostapha to initiate a well structured, well documented, flexible, and extendable version of the Ladybug libraries. While such code is something that few community members will interact with directly, a well-documented library is critical for maintaining the project, adding new features, and for porting Ladybug to other software platforms.
The new Ladybug libraries are still under development across a number of new repositories and they separate a ladybug-core, which includes epw parsing and all non-geometric functions, from interface-specific geometry libraries. This allows us to easily extend Ladybug to other platforms with a different geometry library for each platform (ie. ladybug-grasshopper, ladybug-dynamo, ladybug-web, etc) all of which are developed on top of the ladybug-core.
Without getting too technical, here is an example of a useful outcome of this development. If you want to know the number of hours that relative humidity is more than 90% for a given epw, all that you have to code (in any python interface) is the following:
import ladybug as lb
_epwFile = r"C:\EnergyPlusV7-2-0\WeatherData\USA_CO_Golden-NREL.724666_TMY3.epw"
epwfile = lb.epw.EPW(_epwFile)
filteredData = epwfile.relativeHumidity.filterByConditionalStatement('x>90')
print "Number of hours with Humidity more than 90 is %d "%len(filteredData.timeStamps)
Compare that to the 500 + lines that you would have had to write previously for this operation, which were usually tied to a single interface! Now let’s see what will happen if you want to use the geometry-specific libraries. Let’s draw a sunpath in Grasshopper:
import ladybuggrasshopper.epw as epw
import ladybuggrasshopper.sunpath as sunpath
# get location data form epw file
location = epw.EPW(_epwFile).location
# initiate sunpath based on location
sp = sunpath.Sunpath.fromLocation(location, northAngle = 0, daylightSavingPeriod = None, basePoint =cenPt, scale = scale, sunScale = sunScale)
# draw sunpath geometry
sp.drawAnnualSunpath()
# assign geometries to outputs
...
Finally we ask, how would this code will look if we wanted to make a sunpath for dynamo? Well, it will be exactly the same! Just change ladybuggrasshopper in the second line to ladybugdynamo! Here is the code which is creating the sunpath below.
With this ease of scripting, we hope to involve more of our community members in our development and make it easy for others to use ladybug in their various preferred applications. By the next release, we will produce an API documentation (documentation of all the ladybug classes, methods and properties that you can script with) and begin making tutorials for those interested in getting deeper into Ladybug development.
LADYBUG
1 - Initial Release of Ladybug for Dynamo:
As is evident from the post above, we are happy to announce the first release of Ladybug for Dynamo! You can download the ladybug package from Dynamo package manager. Make sure to download version 0.0.6 which is actually 0.0.1! It took a number of trial and errors to get it up there. Once you have the file downloaded you can watch these videos to get started:
The source code can be find under ladybug-dynamo repository and (as you can already guess) it is using the new code base. It includes a very small toolkit of essential Ladybug components/nodes but it has enough to get you started. You can import weather files, draw sunpaths and run sunlighthours or radiation analyses.
There are two known issues in this release but neither of them is critical. You need to have Dynamo 0.9.1 or higher installed which you can download from here (http://dynamobuilds.com/). It is recommended that you run the scripts with ‘Manual’ run (as opposed to ‘Automatic’) since the more intense calculations can make Dynamo crash in automatic mode.
To put things in perspective, here is how we would map Ladybug for Dynamo vs Ladybug and Honeybee for Grasshopper on the classic ‘Hype graph’. The good news is that what we learned a lot from the last three years, making development of the Dynamo version easier and getting us to the plateau of productivity faster.
We should also note that the current development of the Dynamo interface is behind that of the Ladybug-Core, which means there are a number of features that are developed in the code but haven’t made their way to the nodes yet. They will be added gradually over the next month or two.
If you’re interested to get involved in the development process or have ideas for the development, follow ladybug on Facebook, Twitter and Github. We will only post major release news here. Facebook, github and twitter will be the main channels for posting the development process. There will also be a release of a new ladybug for Grasshopper soon that will use the came Ladybug-Core libraries as the Dynamo interface [Trying hard not to name it as Ladybug 2].
2 - New Project “Icarus” Provides Ladybug Capabilities Directly in Rhino
Speaking of expanded cross-platform capabilities, the talented Miguel Rus has produced a standalone Rhino Plugin off of the original Ladybug code that has been included in this release. After writing his own core C# libraries, Miguel’s plugin enables users to produce sunpath and run sunlight hours analyses in the Rhino scene without need of opening Grasshopper or engaging the (sometimes daunting) act of visual scripting.
This release includes his initial RHP plugin file. It is hoped that Miguel’s efforts will extend some of the capabilities of environmental design to individuals who are unfamiliar with visual scripting, casting the network of our community into new territory. We need your help spreading the word about Icarus since the people who will benefit the most from it have probably not read this far into the release notes. Also, as the project is in the early stages, your feedback can make a great difference. You can download the current release from this link.
Once you download the zip file. Right click and unblock it. Then extract the files under C:\Program Files\Rhinoceros 5 (64-bit)\Plug-ins\ folder. Drag and drop the RHP file into Rhino and you should be ready to go. You can either type Icarus in the command line or open it via the panels. Here is a short video that shows how to run a sunlighhours analysis study in Rhino.
3 - BakeIt Input Now Supports a Pathway to PDF +Vector Programs
As promised in the previous release, the BakeIt_ option available on Ladybug’s visual components has been enhanced to provide a full pathway to vector-based programs (like Illustrator and Inkscape) and eases the export to vector formats like PDFs.
This means that the BakeIt_ operation now places all text in the Rhino scene as actual editable text (not meshes) and any colored meshes are output as groups of colored hatches (so that they appear as color-filled polygons in vector-based programs). There is still an option to bake the colored geometries as light meshes (which requires smaller amounts of memory and computation time) but the new hatched capability should make it easier to incorporate Ladybug graphics in architectural drawings and documents like this vector psychrometric chart.
4 - Physiological Equivalent Temperature (PET) Now Available
Thanks to the efforts of Djordje Spasic, it is now possible to compute the common outdoor comfort metric ‘Physiological Equivalent Temperature’ (PET) with Ladybug. The capability has been included with this release of “Thermal Comfort Indices” component and is supported by a “Body Characteristics” component in the Extra tab. PET is particularly helpful for evaluating outdoor comfort at a high spatial resolution and so the next Honeybee release will include an option for PET with the microclimate map workflow.
5 - Solar Hot Water Components Available in WIP
Chengchu Yan and Djordje Spasic have built a set of components that perform detailed estimates of solar hot water. The components are currently undergoing final stages of testing and are available in the WIP tab of this release. You can read the full release notes for the components here.
6 - New Ladybug Graphic Standards
With the parallel efforts or so many developers, we have made an effort in this release to standardize the means by which you interact with the components. This includes warnings for missing inputs and the ability to make either icons or text appear on the components as you wish (Hi Andres!). A full list of all graphic standards can be found here. If you have any thoughts or comments on the new standards, feel free to voice them here.
7 - Wet Bulb Temperature Now Available
Thanks to Antonello Di Nunzio - the newest member of the Ladybug development team, it is now possible to calculate wet bulb temperature with Ladybug. Antonello’s component can be found under the WIP tab and takes inputs of dry bulb temperature, relative humidity, and barometric pressure.
8 - New View Analysis Types
The view analysis component now allows for several different view studies in addition to the previous ‘view to test points.’ These include, skyview (which is helpful for studies of outdoor micro-climate), as well as spherical view and ‘cone of vision’ view, which are helpful for indoor studies evaluating the overall visual connection to the outdoors.
HONEYBEE
1 - Connection to THERM and LBNL Programs
With this release, many of you will notice that a new tab has been added to Honeybee. The tab “11 | THERM” includes 7 new components that enable you to export ready-to-simulate Lawrence Berkeley National Lab (LBNL) THERM files from Rhino/Grasshopper. THERM is a 2D finite element heat flow engine that is used to evaluate the performance of wall/window construction details by simulating thermal bridging behavior. The new Honeybee tab represents the first ever CAD plugin interface for THERM, which has been in demand since the first release of LBNL THERM several years ago. The export workflow involves the drawing of window/wall construction details in Rhino and the assigning of materials and boundary conditions in Grasshopper to produce ready-to-simulate THERM files that allow you to bypass the limited drawing interface of THERM completely. Additional components in the “11 | THERM” tab allow you to import the results of THERM simulations back into Grasshopper and assist with incorporating THERM results into Honeybee EnergyPlus simulations. Finally, two components assist with a connection to LBNL WINDOW for advanced modeling of Glazing constructions. Example files illustrating many of the capabilities of the new components can be found in there links.
THERM_Export_Workflow, THERM_Comparison_of_Stud_Wall_Constructions
Analyze_THERM_Results, Thermal_Bridging_with_THERM_and_EnergyPlus
Import_Glazing_System_from_LBNL_WINDOW, Import_LBNL_WINDOW_Glazing_Assembly_for_EnergyPlus
It is recommended that those who are using these THERM components for the first time begin by exploring this example file.
Tutorial videos on how to use the components will be posted soon. A great deal of thanks is due to the LBNL team that was responsive to questions at the start of the development and special thanks goes to Payette Architects, which allowed Chris Mackey (the author of the components) a significant amount of paid time to develop them.
2 - Electrical Lighting Components with Enhanced Capabilities for Importing and Manipulating IES Files
Thanks to the efforts of Sarith Subramaniam, it is now much easier and more flexible to include electric lighting in Honeybee Radiance simulations. A series of very exciting images and videos can be found in his release post.
You can find the components under WIP tab. Sarith is looking for feedback and wishes. Please give them a try and let him know your thoughts. Several example files showing how to use the components can be found here. 1, 2, 3.
3- Expanded Dynamic Shade Capabilities
After great demand, it is now possible to assign several different types of control strategies for interior blinds and shades for EnergyPlus simulations. Control thresholds range from zone temperature, to zone cooling load, to radiation on windows, to many combinations of these variables. The new component also features the ability to run EnergyPlus simulations with electrochromic glazing. An example file showing many of the new capabilities can be found here.
Dragonfly Beta
In order to link the capabilities of Ladybug + Honeybee to a wider range of climatic data sets and analytical tools, a new insect has been initiated under the name of Dragonfly. While the Dragonfly components are not included with the download of this release, the most recent version can be downloaded here. An example file showing how to use Dragonfly to warp EPW data to account for urban heat island effect can also be found here. By the next release, the capabilities of Dragonfly should be robust enough for it to fly on its own. Additional features that will be implemented in the next few months include importing thermal satellite image data to Rhino/GH as well as the ability to warp EPW files to account for climate change projections. Anyone interested in testing out the new insect should feel free to contact Chris Mackey.
And finally, it is with great pleasure that we welcome Sarith and Antonello to the team. As mentioned in the above release notes, Sarith has added a robust implementation for electric light modeling with Honeybee and Antonello has added a component to calculate wet bulb temperature while providing stellar support to a number of people here on the GH forum.
As always let us know your comments and suggestions.
Enjoy!
Ladybug+Honeybee development team
PS: Special thanks to Chris for writing most of the release notes!…