solution exception: gradient color takes exactly 5 arguments(7 given)

Replies to This Discussion

Permalink Reply by Antonello Di Nunzio on September 16, 2016 at 5:53am

Hi farzane,

Probably, the "gradientColor(...) method" of your LB LB is not equals to "gradientColor(...) method" of LB_Recolor Mesh. But I need the file to check.

Could you share a gh file like this?

Best 

Antonello

Permalink Reply by Farzane Oghazian on September 17, 2016 at 4:28am

Dear Antonello

before you respond to my question I removed honeybee and lady bug and installed from the scratch. now I have another issue with recalling annual simulation.

I randomly get this errors

solution exception: index out of range()

                        : attempted to divide by zero

I attached gh and annual analysis files 

I will appreciate if you can help me through...

Thanks,

Attachments:

• 95-06-21-recall annual analysis.gh, 513 KB
• CircularScreen_Depth0.5X.zip, 3.4 MB

Permalink Reply by Antonello Di Nunzio on September 17, 2016 at 5:32am

Hi farzane,

This issue is because you used "Honeybee_Generate Zone Test Points" with multiple surfaces instead of an honeybee zone. Only the second branch is right, thus if you select it your simulation should be fine.

I suggest that you use "Honeybee_Generate Zone Test Points" with a closed honeybee zone.

Best

Antonello

Permalink Reply by Farzane Oghazian on September 17, 2016 at 6:48am

Dear Antonello

thanks a lot, it was really helpful...

Regards,

Farzane

Permalink Reply by Veronika on September 16, 2016 at 8:40am

Hi farzane,

I had the same issue. The problem was that I was using an outdated version of Ladybug (VER 0.0.63 AUG_10_2016).

Updating to VER 0.0.63 AUG_25_2016 solved the problem in my case.

Best,

Veronika

Permalink Reply by Farzane Oghazian on September 17, 2016 at 4:34am

Hi Veronika,

In fact, I had an updated plug in. after reinstalling it was solved...

thanks,