Voronoi in box/voronoi 3D/skeleton

Hi everyone,

I am trying to get an effect as per attached picture "Final Effect".

I've read different discussion such as:

http://www.grasshopper3d.com/forum/topics/hey-how-to-creat-a-3d-vor...

and

http://www.grasshopper3d.com/forum/topics/skeletal-mesh?id=2985220%...

and other similar, but couldn't get any thing as I wanted.

You can open the definition below voronoi box and this link, scroll at the bottom, the picture you see with the voronoi box, is what the definition should do, but it doesn't, any guess?

Thank you

http://www.grasshopper3d.com/forum/topics/how-i-can-get-this?id=298...

Attachments:

Replies to This Discussion

Permalink Reply by Hyungsoo Kim on January 7, 2016 at 6:49am

Hi.

There are so many relevant thread about 3d-voronoi skeletal framing, so you can easily find and try this method.

You'll need Exoskeleton and Topologizer +Weaverbird plug-ins

Beware some slider twicking will break the definition, so, you'll have to find fine combinations between topologizer's tolerance and Exowireframe's slider values.

Attachments:

voronoibox_re.gh, 12 KB

Permalink Reply by Stella Page on January 7, 2016 at 12:19pm

kim,

Thank you, you are the best !

Permalink Reply by Stella Page on January 8, 2016 at 10:21am

I am trying to get an effect as per picture 001, but i can't with the definition I have, where I am making the mistake?

http://www.grasshopper3d.com/profiles/blogs/jewelry-design-with-vor...

Attachments:

Permalink Reply by Hyungsoo Kim on January 8, 2016 at 11:52am

They are not the same thing. I don't think you quite understand the difference.

Attachments:

VoronoiRing.gh, 23 KB

Permalink Reply by Stella Page on January 11, 2016 at 4:17am

I understand that these two definition do different things and generate a different result. Probably I explained wrong what I would like to achieve. The idea is to have a voronoi pattern but on a box 800x800x150mm, that is similar on what there is on the ring. which then I will CNC with the robot here in the lab.

thank you

Attachments: