Project & Orient waffle element

Replies to This Discussion

Permalink Reply by Hyungsoo Kim on March 4, 2016 at 1:21am

Hi.

iI suppose your blade section curves are not consistent in direction.

Simple way to fix this is to flip and extract 24th blade boundary curve and adjust curve seam position, and

recreate blade surface.

Attachments:

• BLADES_re.3dm, 1.6 MB
• Proj_Blades_re.gh, 206 KB

Permalink Reply by Thierry on March 4, 2016 at 8:21am

hi Kim,

thank you for your answer.

But this method is laborious if i have many curves to modify one by one...

Permalink Reply by Hyungsoo Kim on March 4, 2016 at 1:57pm

I have simillar def. of rib fabrication for open brep(case sensitive, of course...) no scripting, using native gh component except "Fabtool" plug-in's "Engrave Text"component.

I can share if you want.

Permalink Reply by Thierry on March 5, 2016 at 2:33am

Yes with pleasure .i am really interested in your proposal

Salutations

Thierry

Permalink Reply by Hyungsoo Kim on March 5, 2016 at 4:56am

Hope it is of some help. Best.

Attachments:

• RibStructureFab.gh, 310 KB

Permalink Reply by Thierry on March 5, 2016 at 4:00pm

really nice for sharing.

Personally i cut the object with radial curves like this:

with this def...

Salutations

Attachments:

• Slice_radial.gh, 125 KB

Permalink Reply by Thierry on March 6, 2016 at 1:47pm

Hi Kim,

i have made some modifications and your def work great with this type of surfaces.

I'm really grateful for your help.

Salutations

Attachments:

• RibStructureFab__modif.gh, 425 KB
• Surf Ribs_test.3dm, 843 KB

Permalink Reply by Riccardo Majewski on March 4, 2016 at 2:13pm

I'm a bit late, btw...

This chain of blocks "correct" the plane that is out of the "chorus".

(its surface is indeed flipped)

Bye :D

Attachments:

• Proj_Blades_V2.gh, 210 KB

Permalink Reply by Thierry on March 5, 2016 at 3:08am

Hi Riccardo

work fine :)

thank you for your help.