Problem with conversion from trimmed surface to mesh

Replies to This Discussion

Permalink Reply by David Rutten on March 27, 2015 at 11:04am

You can connect any Surface or Brep to a Mesh parameter and it will get converted automatically. If you want control over the meshing settings, you can use a dedicated [Mesh Brep] component.

Permalink Reply by Baldo degli Ubaldi on March 27, 2015 at 12:26pm

Thank you for the answer

i want to try make something like this.... (attached Step1 Step2 Step3)

but in this case is easy because i started from a rectangular grid but now i want play with my area-surface (attached before) and i cannot discretize the surface so as to obtain the points of intersection within the new grid but isolating only the interior points from the border points

Attachments:

• step1.jpg, 577 KB
• step3.jpg, 536 KB
• step2.jpg, 494 KB

Permalink Reply by Baldo degli Ubaldi on March 27, 2015 at 12:27pm

here the discretization failed

Attachments:

• disctretize.jpg, 611 KB