glazing based on ration creating unwanted windows In HB v 0.0.53

Helloo Guys

As illustrated in this image HB galzing ByRation component creates unwanted interior windows which I don't understand. I only want a south oriented window but for some reason I get northen interior windows (perimeter interior zone is set to 0.5m) This analysis is required to illustrate illuminance only . I guess I don't need to provide interior zones in this case

thank you all

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Claudio on July 15, 2014 at 11:52am

Final reply I guess. After Updating HB and LB Mannually. Everything seams ok.

But Now that HB send info (internal zones to EP) I think we need to build the GH definition differently. Internal zones does not seams to be compatible with daylighting as it creates test Srf that are unwanted. am I right?

cheers

Permalink Reply by Mostapha Sadeghipour Roudsari on July 15, 2014 at 1:21pm

Actually you don't need to create another geometry. Daylighting component has a boolean input (exportInteriorWalls_) which takes care of this concern. Set exportInteriorWalls_ to False not to export the interior walls.

Warning: split zone is not fully implemented to Honeybee_Honeybee (e.g. there will be no air mix between the zones and radiation won't pass to the core zone unless you create internal windows.