[solved] got "You should first let the Ladybug fly…" warning

I got this warning when opening a gh file working fine previously, and it doesn't go away even if I updated LB&HB and dragged both of them again into GH.

Any advice on solving this problem without replacing all the components with this warning again and again?

Thanks!

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Abraham Yezioro on July 21, 2015 at 10:32pm

You should send the KB_LB to the back (ctrl+B) and then disable/enable it (ctrl+E twice). Then disable/enable the component(s) that are complaining.

-A.

Permalink Reply by Grasshope on July 21, 2015 at 11:51pm

Thank you, Abraham!

Disable/enable the component solve the problem.

Permalink Reply by Chris Mackey on July 22, 2015 at 5:08pm

Thanks for the good response, Abraham. To clarify, hitting (ctrl+B) sends whatever components that are selected to the back of the canvass so that GH will read those components first when it opens (or re-computes) the file. You want LB_LB and HB_HB to be read before any other components on the canvass since these components contain all of the libraries and functions that the other components use. When you drop a new LB_LB or HB_HB onto a canvass, it puts the components on the front so you have to select them and hit (ctrl+B) to ensure that everything works correctly in the future.

-Chris

Permalink Reply by Anton Szilasi on December 2, 2015 at 1:07am