Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on January 31, 2016 at 6:20pm

Hi Tim,

Great to see that you've started learning Honeybee too. I checked your file and I also get the error. The error is honeybee error and not related to OpenStudio or EnergyPlus installation. It's probably the results of some recent changes for making zone evaluation faster. I added an issue to Honeybee to fix it soon. It seems to only happen for double curvature surfaces.

https://github.com/mostaphaRoudsari/Honeybee/issues/467

Mostapha

Permalink Reply by Tim on February 1, 2016 at 12:08am

Hi Mostapha,

Thanks for the help, I'll switch to another example geometry Chris provides for the time being.

Permalink Reply by Chryl Lee on March 3, 2016 at 5:42am

Me too I met the same problem with cylinder, but I succeeded in twist cube.

I'll follow this discussion :)

Permalink Reply by Anton Szilasi on March 4, 2016 at 3:26pm

Mostapha,

I am also getting this issue. Unfortunately its on a massive file so its difficult to share.

Permalink Reply by Jacek Urbanowicz on May 18, 2016 at 10:06am

Hi,

same problem here with the double curvature surface...

Permalink Reply by Anton Szilasi on May 18, 2016 at 12:43pm

Hi Jacek can you post your file

Permalink Reply by Mostapha Sadeghipour Roudsari on May 18, 2016 at 12:54pm

Are you using the most updated version from github? This issue has been fixed.