the "port" input. I would really appreciate any help!
For example, my Arduino board is connected to COM 3. The "ports available" component correctly identifies this port, and I know there is nothing wrong with the port itself since the Arduino communicates through COM 3 without problem when using an Arduino sketch.
The runtime error produced by the Firefly open/close port component:
1. Solution exception:Could not load type 'Grasshopper.Instances' from assembly 'Grasshopper, Version=1.0.0.20, Culture=neutral, PulicKeyToken=null'.
System specs:
Windows 7 64-bit
Rhinoceros 4.0 SR 9
Grasshopper Build 0.8.006
Firefly Build 1.0067
Arduino Uno R3
These error messages appear when Grasshopper is loaded from Rhino. They first appeared when Firefly was installed:
Object: Mega_Write (level 1){ Exception has been thrown by the target of an invocation. TargetInvocationException}
Object: Mega_Write (level 2){ Method not found: 'Void Grasshopper.Kernel.GH_PersistentParam`1.SetPersistentData(System.Object[])'. MissingMethodException}
Object: Uno_Write (level 1){ Exception has been thrown by the target of an invocation. TargetInvocationException}
Object: Uno_Write (level 2){ Method not found: 'Void Grasshopper.Kernel.GH_PersistentParam`1.SetPersistentData(System.Object[])'. MissingMethodException}
Object: ArduinoBake (level 1){ Exception has been thrown by the target of an invocation. TargetInvocationException}
Object: ArduinoBake (level 2){ Method not found: 'Void Grasshopper.Kernel.GH_PersistentParam`1.SetPersistentData(System.Object[])'. MissingMethodException}
Thank you for your help!
Colin…
be done easier, but later on the geometry will change and therefore this seems the better option. But coming back to the problem
First, there were some problems concerning the zone, although it seems solved still the “runenergysimulation” gives the following warning:
1. The simulation has not run correctly because of this severe error:
** Severe ** UpdateZoneSizing: Cooling supply air temperature (calculated) within 2C of zone temperature
Do one of you know what went wrong? It probably will solve most of it.
Second, “set Zone Thresholds” gives the following warning:
1. Solution exception:global name 'maxHumidity_' is not defined
However, the component is missing the max humidity input on the list, has this to do something with the error?
All the components are up to date.
I hope it will be an easy fix.
Gr Lars
“set Zone Thresholds” runtime error
{0;0;0}0. Runtime error (UnboundNameException): global name 'maxHumidity_' is not defined1. Traceback: line 80, in checkTheInputs, "<string>" line 282, in script
"runenergysimulation” report
{0;0}0. Current document units is in Meters1. Conversion to Meters will be applied = 1.0002. TypeError('Waarde kan niet null zijn.\r\nParameternaam: source',)3. Failed to copy the object. Returning the original objects...This can cause strange behaviour!4. [1 of 8] Writing simulation parameters...5. [2 of 8] No context surfaces...6. [3 of 8] Writing geometry...7. [4 of 8] Writing Electric Load Center - Generator specifications ...8. [5 of 8] Writing materials and constructions...9. [6 of 8] Writing schedules...10. [7 of 8] Writing loads and ideal air system...11. [8 of 8] Writing outputs...12. ...... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf13. 14. Analysis is running!...15. c:\ladybug\unnamed\EnergyPlus\eplusout.csv16. ......
Done! Read below for errors and warnings:
17. 18. Program Version,EnergyPlus, Version 8.3.0-6d97d074ea, YMD=2016.03.02 20:55,IDD_Version 8.3.019. 20. ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.21. 22. ************* Beginning Zone Sizing Calculations23. 24. ** Warning ** GetInternalHeatGains: People="CLASSROOMOFFICEPEOPLE", Activity Level Schedule Name values25. 26. ** ~~~ ** fall outside typical range [70,1000] W/person for Thermal Comfort Reporting.27. 28. ** ~~~ ** Odd comfort values may result; Schedule="SCHOCCUPANCYSCHEDULE".29. 30. ** ~~~ ** Entered min/max range=[0.0,1.0] W/person.31. 32. ** Warning ** Calculated design heating load for zone=CLASSROOM is zero.33. 34. ** ~~~ ** Check Sizing:Zone and ZoneControl:Thermostat inputs.35. 36. ** Severe ** UpdateZoneSizing: Cooling supply air temperature (calculated) within 2C of zone temperature37. 38. ** ~~~ ** ...check zone thermostat set point and design supply air temperatures39. 40. ** ~~~ ** ...zone name = CLASSROOM41. 42. ** ~~~ ** ...design sensible cooling load = 25499.10 W43. 44. ** ~~~ ** ...thermostat set point temp = 0.000 C45. 46. ** ~~~ ** ...zone temperature = 15.334 C47. 48. ** ~~~ ** ...supply air temperature = 15.000 C49. 50. ** ~~~ ** ...temperature difference = -0.33433 C51. 52. ** ~~~ ** ...calculated volume flow rate = 197273.21341 m3/s53. 54. ** ~~~ ** ...calculated mass flow rate = 237634.19357 kg/s55. 56. ** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.57. 58. ************* Testing Individual Branch Integrity59. 60. ************* All Branches passed integrity testing61. 62. ************* Testing Individual Supply Air Path Integrity63. 64. ************* All Supply Air Paths passed integrity testing65. 66. ************* Testing Individual Return Air Path Integrity67. 68. ************* All Return Air Paths passed integrity testing69. 70. ************* No node connection errors were found.71. 72. ************* Beginning Simulation73. 74. ************* Simulation Error Summary *************75. 76. ** Warning ** The following Report Variables were requested but not generated77. 78. ** ~~~ ** because IDF did not contain these elements or misspelled variable name -- check .rdd file79. 80. ************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL COOLING ENERGY, Frequency=Hourly81. 82. ************* Key=*, VarName=ZONE PACKAGED TERMINAL HEAT PUMP TOTAL HEATING ENERGY, Frequency=Hourly83. 84. ************* Key=*, VarName=CHILLER ELECTRIC ENERGY, Frequency=Hourly85. 86. ************* Key=*, VarName=BOILER HEATING ENERGY, Frequency=Hourly87. 88. ************* Key=*, VarName=FAN ELECTRIC ENERGY, Frequency=Hourly89. 90. ************* Key=*, VarName=ZONE VENTILATION FAN ELECTRIC ENERGY, Frequency=Hourly91. 92. ************* Key=*, VarName=EARTH TUBE FAN ELECTRIC ENERGY, Frequency=Hourly93. 94. ************* Key=*, VarName=PUMP ELECTRIC ENERGY, Frequency=Hourly95. 96. ************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT LOSS ENERGY, Frequency=Hourly97. 98. ************* Key=*, VarName=ZONE VENTILATION TOTAL HEAT GAIN ENERGY, Frequency=Hourly99. 100. ************* Key=*, VarName=EARTH TUBE ZONE SENSIBLE COOLING ENERGY, Frequency=Hourly101. 102. ************* Key=*, VarName=EARTH TUBE ZONE SENSIBLE HEATING ENERGY, Frequency=Hourly103. 104. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.105. 106. ************* EnergyPlus Sizing Error Summary. During Sizing: 3 Warning; 1 Severe Errors.107. 108. ************* EnergyPlus Completed Successfully-- 5 Warning; 1 Severe Errors; Elapsed Time=00hr 00min 4.65sec109.…
ceros.
Public concerné /
Architectes et designers, utilisateurs de Rhino souhaitant paramétrer Rhinocéros à l’aide de Grasshopper, programme
associant des composants et une structure de graphe interagissants avec le modèle Rhino.
Une bonne connaissance de Rhinocéros est nécessaire. La langue de la formation est le français.
Structure et Objectif de la formation /
La formation se déroule sur 3 jours : les 2 premières journées sont consacrées aux « fondamentaux » de Grasshopper
avec en préambule une introduction au design et à l’architecture paramétrique et leurs impacts dans la conception, la
création et la construction.
La troisième journée sous forme d’atelier est dédiée à l’étude de cas concrets proposés par les stagiaires, qui, quelques
jours avant la formation, pourront envoyer leurs projets par mail à info AT rhinoforyou DOT com
Les stagiaires, après la formation, pourront rester en contact avec les formateurs de HDA par le biais du blog
complexitys.com et le twitter @HDA_Paris. La durée de cette formation permettra d’atteindre une autonomie et une
bonne compréhension basée sur des exemples concrets.
3 Formules possibles /
3 jours ( Initiation+Atelier ) : du lundi 20 septembre au mercredi 22 septembre
2 jours ( Initiation ) : lundi 20 et mardi 21 septembre
1 jour ( Atelier ) : mercredi 22 septembre
Programme ind icatif des notions traitéES pendan t la formation /
Introduction à la conception Paramétrique . Rhinoscript, Grasshopper: différences et similarités . Interface
graphique de Grasshopper . Objets, Données, Listes . Opérateurs scalaires : La mathématique de
Grasshopper . Gestions des données : la logique de Grasshopper . Vecteurs, Points, Lignes, Surfaces : La
géométrie de Grasshopper . Listes, Arbres, Branches . Le dessin paramétrique: exercices divers et exemples
. Références, Bibliographie, Support de cours . Ateliers d’architecture et design paramétrique (3ème jour) .
Moda lité de la formation /
Venir avec un PC portable équipé de Rhinocéros version 4.0 SR 7 et de la dernière version du plug-in
Grasshopper (téléchargeable sur www.grasshopper3d.com).
Le coût du stage est de 350 € HT/jour par personne.
Réserver votre place dès que possible car les places sont limitées à 10 participants maximum.
Inscriptions et renseignements: Jacques Hababou, info AT rhinoforyou DOT com
Pour en savoir plus sur l’architecture paramétrique: www.complexitys.com…
cs algorithms are ill-suited to calculating the transmission of a partially open screen. The sampling of rays required, and indeed the lack of actual wave-based movement of sound intensity makes them only suitable for large scale studies of spaces making the following assumptions, among others:
- The primary behavior of sound can be described by rays
- Diffraction lends only low significance effects
- Few, preferably no obstructions between the source and reciever
With regard to sound hitting a partially open screen, a variety of behaviors come into play. Sound moves in and out and around various points of a screen - meaning that rays can not describe the behavior of sound for such small delicate structures.
The good news is that some of the latest versions of Pachyderm also employ numerical methods. Try typing "Pachyderm_Numeric_Timedomain into the command prompt, and you'll get the controls for the Finite Volume Method. This method accounts for wave-based phenomena.
Now more bad news: The method does not have implemented an insertion loss calculation, so you would have to work in the source code to implement it, and it still does not have materials implemented (that last part may not be terribly important unless you intended to use porous sound absorptive materials).
So, in any case, I don't recommend using Pachyderm to determine the sound transmission of your design. Now for some more good news - you can do a rough calculation on a calculator, making a few assumptions, if you know the open area of your screen. Let's say that we assume your materials do not transmit at all (which they won't, but they will transmit far less than any opening in the screen). So let's assume you design a 50% open area screen. The transmission loss of the assembly, independent of octave band will be at most:
TL = 10*log10(0.5) = 3 dB
This means that the noise from your source will be 3 dB less on the quiet side of the screen than it will be on the railway side of the fence. Let's say that isn't enough... ok 20% open.
TL = 10*log10(0.2) = 7 dB
So now it is 7 dB less on the quiet side than it is on the rail side (it will probably be up to 3 dB louder at low frequencies, but this is a rough estimate).
So now the last bit of bad news - it is difficult, maybe impossible to get a strong amount of attenuation with a screen with open area. Even with a wall with no open area, the maximum attenuation will be 20 dBA. When you open it up, this will severely hamper the isolation of the screen. I hope this helps.
- Arthur…
flectance and use .2 as default. You can use ShadingProperty:Reflectance to change the default value. We don't support this in Honeybee interface right now but you can create the objects and add them to your energy model using additionalStrings_ input.
I put a simple example together were I change the reflection for shading surfaces to .5 for unglazed part of shading and portion and .7 for glazed part. I also set the percentage of glazing to 50% of the surface area.
I didn't put any input checks. Make sure to read the documentation to put valid input values for energyplus otherwise the energyplus simulation will fail. I also assumed that all the shading surfaces (context) will be planar surfaces.
Keep in mind that it will only effect the results if you are using one of the solar distributions with reflections. Honeybee is using FullInteriorAndExteriorWithReflections by default so you should be fine if you're using the default settings.
Hope it helps,
Mostapha
…
tion plays a role, so number 1 and 7 are maybe the same in math sense but not by my definition.
but what im aiming for is plotting out all possible combination of lets say n=50 cubes. so i need some kind of logic to generate these combinations. filtering ( and predefing start combinations-like dedackelzuchts link ) out these combinations according to some criteria would be the next thing.
i have no scripting abilities therefore my question was if this could be done also by gh components.
i thought about something like this:
add cube
extrude one face (x,y or z) -> one possible geometry (if orientation doesnt play a role)
check the two cubes
extrude one face (faces that are at same position are not valid) - > two possible combinations
check the 3 cubes
...
and so on
the thig is that the combinations branches and i have no clue how to do this with grasshopper.
thanxs a bunch
…
imilar topic with a Windows 10 user, which successfully fixed this issue.If you are tiny little patient, I think we can try the same steps in your Windows 7 case.For start, try these three steps:1) Close Rhino. Restart your PC. 2) Once the PC boots up, double click on the "regMapWinGIS.cmd" file in "MapWinGIS" installation folder.3) When it closes the Command Prompt window it opened, try running Rhino, Grasshopper and drop the "Gismo Gismo" component on the canvas (Grasshopper working area).If this does not help (you get the same COM class factory CLSID error message coming out from the "Gismo Gismo" component), then try the following steps, one by one:
1) Close Grasshopper and Rhino2) Run the Revo Uninstaller Pro and uninstall your MapWinGIS application along with removing all the leftovers from the registry. You can download 30 days trial version of it from here. Here is a youtube example of a bit older Revo Uninstaller. But the important part is that is shows how registry leftovers are removed.3) Restart your PC, and once it boots again, make sure that you are logged in as an Adminstrator!4) In your Start menu's search box type: "UAC", which will find your User Account Control Settings. Click on it, and a new window will open. Set the bar on the left to "Never notify".5) Turn off your Antivirus, which ever it is.6) Download the 64 bit version of v4.9.4.2 MapWinGIS.7) Right click on downloaded MapWinGIS-only-v4.9.4.2-x64.exe file, and choose "Properties". If there is "Unblock" button click on it, and then click on "OK". If there is no "Unblock" button, just click on "OK".8) Left double click on MapWinGIS-only-v4.9.4.2-x64.exe file and install it to "C:\dev\MapWinGIS" folder. Choose "Full installation" during installation process!9) In your Start menu's search box type: "CMD". Once the "Command prompt" appears do not left click on it! Instead right click on it, and choose "Run as Administrator".10) A command prompt window will open. Type the following command:
"your_regsvr32_folder_path\regsvr32.exe" /u /s c:\dev\mapwingis\mapwingis.ocx
If command does not result in an error message, then type this one afterwards:
"your_regsvr32_folder_path\regsvr32.exe" /s c:\dev\mapwingis\mapwingis.ocx
11) If no error appeared again, then open your Rhino and Grasshopper and check what "Gismo Gismo" component prints from its "readMe!" output.If errors appeared, please post their screenshots. Thank you in advance.
Please accept my apologies for the large number of steps. Some of them are quite simple actually (click on this, download that...).…
Added by djordje to Gismo at 12:58pm on November 28, 2017
picture:
... and on a PC without anything attached to the serial port. When you open the port, start the read component and its timer, do you then get a stream of <empty> values in the log output? (hmmm... I suppose that's only reasonable - but still, you are also seeing this?)
I suppose that, because of the mutually exclusive behavior of both the spider and grasshopper (i.e. only one at a time can access the COM port), we can deduce that we are listening on the correct port.
Am I listening on the correct pin (if such a notion makes sense at all)? If I look back to the spider software, I see that 9 channels are listed and that it's only the measured value on channel 0 that changes when I press the load cell. Channels 1, 2, and 3 report OVERFLOW; 4, 5, 6, and 7 are pretty much constant at 0.000 to 0.005 V; and channel 8 says FFFF. I do not know how things like that work so I do not know if they reflect reading from the 9 pins on the D-sub 9 connector.
As for your BTW question: no, I don't need to record all of the sensor values. I suppose that the Out value on the Read component will always reflect the most current value and that's all that I need to get on with life. In the end, the idea is that we have 4 load cells in the 4 corners of a plate onto which a vertical pipe is fixed. Loads are then put on the top end of the pipe and we'll have to visualize both direction and magnitude of the bending moment that is calculated from the compression - tension readings from the load cells... We've done this on a scaled model and streamed load cell information into MatLab. Now we'll have to use a different datalogger and I was hoping to be able to do the post processing in Rhino.
wim…
ceros.
Public concerné /
Architectes et designers, utilisateurs de Rhino souhaitant paramétrer Rhinocéros à l’aide de Grasshopper, programme
associant des composants et une structure de graphe interagissants avec le modèle Rhino.
Une bonne connaissance de Rhinocéros est nécessaire. La langue de la formation est le français.
Structure et Objectif de la formation /
La formation se déroule sur 3 jours : les 2 premières journées sont consacrées aux « fondamentaux » de Grasshopper
avec en préambule une introduction au design et à l’architecture paramétrique et leurs impacts dans la conception, la
création et la construction.
La troisième journée sous forme d’atelier est dédiée à l’étude de cas concrets proposés par les stagiaires, qui, quelques
jours avant la formation, pourront envoyer leurs projets par mail à info AT rhinoforyou DOT com
Les stagiaires, après la formation, pourront rester en contact avec les formateurs de HDA par le biais du blog
complexitys.com et le twitter @HDA_Paris. La durée de cette formation permettra d’atteindre une autonomie et une
bonne compréhension basée sur des exemples concrets.
3 Formules possibles /
3 jours ( Initiation+Atelier ) : du lundi 20 septembre au mercredi 22 septembre
2 jours ( Initiation ) : lundi 20 et mardi 21 septembre
1 jour ( Atelier ) : mercredi 22 septembre
Programme ind icatif des notions traitéES pendan t la formation /
Introduction à la conception Paramétrique . Rhinoscript, Grasshopper: différences et similarités . Interface
graphique de Grasshopper . Objets, Données, Listes . Opérateurs scalaires : La mathématique de
Grasshopper . Gestions des données : la logique de Grasshopper . Vecteurs, Points, Lignes, Surfaces : La
géométrie de Grasshopper . Listes, Arbres, Branches . Le dessin paramétrique: exercices divers et exemples
. Références, Bibliographie, Support de cours . Ateliers d’architecture et design paramétrique (3ème jour) .
Moda lité de la formation /
Venir avec un PC portable équipé de Rhinocéros version 4.0 SR 7 et de la dernière version du plug-in
Grasshopper (téléchargeable sur www.grasshopper3d.com).
Le coût du stage est de 350 € HT/jour par personne.
Réserver votre place dès que possible car les places sont limitées à 10 participants maximum.
Inscriptions et renseignements: Jacques Hababou, info AT rhinoforyou DOT com
Pour en savoir plus sur l’architecture paramétrique: www.complexitys.com…
.0004. [1 of 7] Writing simulation parameters...5. [2 of 6] No context surfaces...6. [3 of 6] Writing geometry...7. [4 of 6] Writing materials and constructions...8. [5 of 7] Writing schedules...9. [6 of 7] Writing loads and ideal air system...10. [7 of 7] Writing outputs...11. ...... idf file is successfully written to : c:\ladybug\unnamed\EnergyPlus\unnamed.idf12. 13. Analysis is running!...14. c:\ladybug\unnamed\EnergyPlus\eplusout.csv15. ......
Done! Read below for errors and warnings:
16. 17. Program Version,EnergyPlus, Version 8.2.7-777c1f8d79, YMD=2015.02.28 16:09,IDD_Version 8.2.718. 19. ** Warning ** IP: Note -- Some missing fields have been filled with defaults. See the audit output file for details.20. 21. ** Warning ** Version: in IDF="'8.2.7'" not the same as expected="8.2"22. 23. ** Warning ** ManageSizing: For a zone sizing run, there must be at least 1 Sizing:Zone input object. SimulationControl Zone Sizing option ignored.24. 25. ** Warning ** ManageSizing: For a plant sizing run, there must be at least 1 Sizing:Plant object input. SimulationControl Plant Sizing option ignored.26. 27. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_1228. 29. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_12_GLZ_1230. 31. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2532. 33. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_25_GLZ_2534. 35. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=F73533B3C6894C67936B_GLZP_2836. 37. ** ~~~ ** Opening Surface creating error=F73533B3C6894C67936B_GLZP_28_GLZ_2838. 39. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_940. 41. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_9_GLZ_942. 43. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1044. 45. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_10_GLZ_1046. 47. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1148. 49. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_11_GLZ_1150. 51. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_1552. 53. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_15_GLZ_1554. 55. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2456. 57. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_24_GLZ_2458. 59. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_2560. 61. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_25_GLZ_2562. 63. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3064. 65. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_30_GLZ_3066. 67. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3268. 69. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_32_GLZ_3270. 71. ** Severe ** GetHTSubSurfaceData: Surface Openings have too much area for base surface=4BDFD67E6D0E486796CC_GLZP_3472. 73. ** ~~~ ** Opening Surface creating error=4BDFD67E6D0E486796CC_GLZP_34_GLZ_3474. 75. ** Warning ** GetSurfaceData: Very small surface area[2.94495E-004], Surface=F73533B3C6894C67936B_GLZP_076. 77. ** Warning ** GetSurfaceData: Very small surface area[3.84753E-004], Surface=F73533B3C6894C67936B_GLZP_178. 79. ** Warning ** GetSurfaceData: Very small surface area[9.16905E-004], Surface=F73533B3C6894C67936B_GLZP_380. 81. ** Warning ** GetSurfaceData: Very small surface area[4.96186E-004], Surface=F73533B3C6894C67936B_GLZP_482. 83. ** Warning ** GetSurfaceData: Very small surface area[2.37373E-005], Surface=F73533B3C6894C67936B_GLZP_684. 85. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_786. 87. ** Warning ** GetSurfaceData: Very small surface area[5.86549E-004], Surface=F73533B3C6894C67936B_GLZP_888. 89. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_1090. 91. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.09566E-004], Surface=F73533B3C6894C67936B_GLZP_1292. 93. ** Warning ** GetSurfaceData: Very small surface area[1.51701E-004], Surface=F73533B3C6894C67936B_GLZP_1394. 95. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_1596. 97. ** Warning ** GetSurfaceData: Very small surface area[2.94451E-004], Surface=F73533B3C6894C67936B_GLZP_1698. 99. ** Warning ** GetSurfaceData: Very small surface area[8.03294E-004], Surface=F73533B3C6894C67936B_GLZP_17100. 101. ** Warning ** GetSurfaceData: Very small surface area[6.83026E-004], Surface=F73533B3C6894C67936B_GLZP_18102. 103. ** Warning ** GetSurfaceData: Very small surface area[9.29917E-004], Surface=F73533B3C6894C67936B_GLZP_20104. 105. ** Warning ** GetSurfaceData: Very small surface area[3.19851E-005], Surface=F73533B3C6894C67936B_GLZP_21106. 107. ** Warning ** GetSurfaceData: Very small surface area[7.63765E-004], Surface=F73533B3C6894C67936B_GLZP_23108. 109. ** Severe ** GetSurfaceData: Zero or negative surface area[-4.05899E-004], Surface=F73533B3C6894C67936B_GLZP_25110. 111. ** Warning ** GetSurfaceData: Very small surface area[6.35824E-004], Surface=F73533B3C6894C67936B_GLZP_27112. 113. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.91146E-004], Surface=F73533B3C6894C67936B_GLZP_28114. 115. ** Warning ** GetSurfaceData: Very small surface area[2.70158E-004], Surface=F73533B3C6894C67936B_GLZP_29116. 117. ** Warning ** GetSurfaceData: Very small surface area[3.22781E-004], Surface=F73533B3C6894C67936B_GLZP_30118. 119. ** Warning ** GetSurfaceData: Very small surface area[4.67821E-004], Surface=F73533B3C6894C67936B_GLZP_33120. 121. ** Warning ** GetSurfaceData: Very small surface area[3.22737E-004], Surface=F73533B3C6894C67936B_GLZP_34122. 123. ** Warning ** GetSurfaceData: Very small surface area[2.65634E-004], Surface=4BDFD67E6D0E486796CC_GLZP_0124. 125. ** Warning ** GetSurfaceData: Very small surface area[4.70736E-004], Surface=4BDFD67E6D0E486796CC_GLZP_1126. 127. ** Warning ** GetSurfaceData: Very small surface area[3.42507E-004], Surface=4BDFD67E6D0E486796CC_GLZP_3128. 129. ** Warning ** GetSurfaceData: Very small surface area[5.89276E-004], Surface=4BDFD67E6D0E486796CC_GLZP_4130. 131. ** Warning ** GetSurfaceData: Very small surface area[1.91146E-004], Surface=4BDFD67E6D0E486796CC_GLZP_6132. 133. ** Warning ** GetSurfaceData: Very small surface area[9.71205E-004], Surface=4BDFD67E6D0E486796CC_GLZP_7134. 135. ** Warning ** GetSurfaceData: Very small surface area[4.34494E-004], Surface=4BDFD67E6D0E486796CC_GLZP_8136. 137. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.60159E-004], Surface=4BDFD67E6D0E486796CC_GLZP_9138. 139. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.11946E-004], Surface=4BDFD67E6D0E486796CC_GLZP_10140. 141. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.41257E-004], Surface=4BDFD67E6D0E486796CC_GLZP_11142. 143. ** Severe ** GetSurfaceData: Zero or negative surface area[-8.21483E-005], Surface=4BDFD67E6D0E486796CC_GLZP_15144. 145. ** Warning ** GetSurfaceData: Very small surface area[2.65716E-004], Surface=4BDFD67E6D0E486796CC_GLZP_16146. 147. ** Warning ** GetSurfaceData: Very small surface area[4.84044E-004], Surface=4BDFD67E6D0E486796CC_GLZP_17148. 149. ** Warning ** GetSurfaceData: Very small surface area[7.12297E-004], Surface=4BDFD67E6D0E486796CC_GLZP_19150. 151. ** Warning ** GetSurfaceData: Very small surface area[6.14324E-004], Surface=4BDFD67E6D0E486796CC_GLZP_22152. 153. ** Warning ** GetSurfaceData: Very small surface area[8.88887E-004], Surface=4BDFD67E6D0E486796CC_GLZP_23154. 155. ** Severe ** GetSurfaceData: Zero or negative surface area[-9.89060E-004], Surface=4BDFD67E6D0E486796CC_GLZP_24156. 157. ** Severe ** GetSurfaceData: Zero or negative surface area[-1.14849E-003], Surface=4BDFD67E6D0E486796CC_GLZP_25158. 159. ** Warning ** GetSurfaceData: Very small surface area[4.00479E-004], Surface=4BDFD67E6D0E486796CC_GLZP_27160. 161. ** Warning ** GetSurfaceData: Very small surface area[6.63061E-005], Surface=4BDFD67E6D0E486796CC_GLZP_28162. 163. ** Warning ** GetSurfaceData: Very small surface area[1.09018E-004], Surface=4BDFD67E6D0E486796CC_GLZP_29164. 165. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.49326E-005], Surface=4BDFD67E6D0E486796CC_GLZP_30166. 167. ** Severe ** GetSurfaceData: Zero or negative surface area[-3.17446E-004], Surface=4BDFD67E6D0E486796CC_GLZP_32168. 169. ** Warning ** GetSurfaceData: Very small surface area[8.60686E-004], Surface=4BDFD67E6D0E486796CC_GLZP_33170. 171. ** Severe ** GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34172. 173. ** Fatal ** GetSurfaceData: Errors discovered, program terminates.174. 175. ...Summary of Errors that led to program termination:176. 177. ..... Reference severe error count=24178. 179. ..... Last severe error=GetSurfaceData: Zero or negative surface area[-2.48515E-005], Surface=4BDFD67E6D0E486796CC_GLZP_34180. 181. ************* Warning: Node connection errors not checked - most system input has not been read (see previous warning).182. 183. ************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.184. 185. ************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.186. 187. ************* EnergyPlus Sizing Error Summary. During Sizing: 2 Warning; 0 Severe Errors.188. 189. ************* EnergyPlus Terminated--Fatal Error Detected. 41 Warning; 24 Severe Errors; Elapsed Time=00hr 00min 1.51sec190.…