How to give a analysis mesh transparency?

Sometimes I would like to give some of the analysis mesh some transparency (I know it is possible with some of the outputs but not all). I have not found a good way of doing it yet. Anyone that have some good tips on doing that?

Thanks,

daniel

Replies are closed for this discussion.

Replies to This Discussion

Permalink Reply by Mostapha Sadeghipour Roudsari on July 23, 2015 at 5:00am

As far as I know you can't give transparency to mesh faces. David has a post on why but I can't find it now. The easiest solution that I know is to re-generate the faces as surfaces and color them. With the new re-colorMesh component it should be pretty easy.

Permalink Reply by Mostapha Sadeghipour Roudsari on August 14, 2015 at 12:00pm

Hi Yuliya, Remove everything first and then open the attached file. Once download is over, close Grasshopper. GrasshopperUnloadPlugin and re-open Grasshopper can you should have the latest version installed on your machine.

Mostapha

Permalink Reply by Mostapha Sadeghipour Roudsari on August 14, 2015 at 12:01pm

here is the file

Attachments:

updateLadybugandHoneybee.gh, 413 KB

Permalink Reply by Abraham Yezioro on August 15, 2015 at 11:18am

Hi Mostapha,

I'm trying this (very useful) option and solution you are giving.

For some reason the colors in the case i'm trying are shifted/swaped. See attached. The first image is the right one, straight from LB. The second is the wrong one.

Any ideas?

Thanks,

-A.

Attachments: