GSA fails to analyse, the GH defined geometry and loading - Grasshopper2024-03-28T18:25:25Zhttps://www.grasshopper3d.com/forum/topics/gsa-fails-to-analyse-the-gh-defined-geometry-and-loading?commentId=2985220%3AComment%3A1802172&feed=yes&xn_auth=noHi Marzhan,
Thanks for posti…tag:www.grasshopper3d.com,2017-08-23:2985220:Comment:18021722017-08-23T07:02:08.776ZJon Mirtschinhttps://www.grasshopper3d.com/profile/JonMirtschin
<p>Hi Marzhan,</p>
<p></p>
<p>Thanks for posting. Can you provide some further information? What does GSA report as it solves. Below is what I see for the attached resulting model.</p>
<p>It sounds odd, if the results are returned to GSA, it is solving. You might have to reset result scales using the GSA button. </p>
<p></p>
<p>Cheers,</p>
<p></p>
<p>Jon</p>
<p></p>
<p>Checking Input Data - this may take some time.</p>
<p>________________________________________</p>
<p>Data checks…</p>
<p>Hi Marzhan,</p>
<p></p>
<p>Thanks for posting. Can you provide some further information? What does GSA report as it solves. Below is what I see for the attached resulting model.</p>
<p>It sounds odd, if the results are returned to GSA, it is solving. You might have to reset result scales using the GSA button. </p>
<p></p>
<p>Cheers,</p>
<p></p>
<p>Jon</p>
<p></p>
<p>Checking Input Data - this may take some time.</p>
<p>________________________________________</p>
<p>Data checks commenced at 23/08/2017 4:59:18 PM.</p>
<p>Checking input data for static analysis by GSS.</p>
<p>Shortest element (element 9) is 5 m long.<br/>Longest element (element 1) is 6 m long.</p>
<p>Data checks completed at 23/08/2017 4:59:18 PM.<br/> No errors or warnings found.</p>
<p>Analysis commenced at 23/08/2017 4:59:18 PM.</p>
<p>Analysis by Gss<br/> Static analysis</p>
<p>Initialising results modules<br/>Solving for displacements<br/>Solution statistics<br/>Sparse Parallel Direct<br/> 12 active nodes<br/> 14 active elements<br/> 2 analysis cases<br/> 24 degrees of freedom<br/> Minimum degree ordering<br/> 90 terms in stiffness matrix<br/> Maximum stiffness is 4.804e+009 at node 4 in direction z<br/> Minimum stiffness is 3.132e+008 at node 2 in direction yy<br/> Condition number of the stiffness matrix is ~ 5328.<br/> Maximum relative error in displacements will be 2.4e-10 percent.<br/> Factorization in 109 ms<br/>Solving for element forces and reactions<br/>Calculation complete<br/>Analysis completed with no errors</p>
<p>Analysis completed at 23/08/2017 4:59:18 PM.<br/>Analysis time: 0.172 seconds</p>
<p></p> Hi, Why you do not use Millip…tag:www.grasshopper3d.com,2017-08-17:2985220:Comment:18000572017-08-17T21:27:10.547ZManoo Ardhttps://www.grasshopper3d.com/profile/ManooArd
<p>Hi, Why you do not use Millipede to do analysis in GH. This simplify everything.</p>
<p>Hi, Why you do not use Millipede to do analysis in GH. This simplify everything.</p>