Grasshopper

algorithmic modeling for Rhino

Hello everyone,
This might be a familiar issue to many of you but I could not find an answer for it in previous discussions (might be me not being a good researcher). I have built a surface in grasshopper and want to offset it so I can loft the surfaces, make it solid and 3d print it. I have built the original surface (red in the image) with loft and when I offset it, in the new surface (green in the image) I get self intersections in some corners that is a problem. Is there any way that I can trim out these self-intersections and clean it up for printing?

Thanks in advance for your help

Views: 2768

Replies to This Discussion

Thanks Toms for your response. Solid modellers are very tempting! If I can export my surface from Rhino to catia or solidworks that is a game changer! 

Use STEP214 and talk to the Master (CATIA)

Master eh? then maybe I should ask some assistance for rebuilding some ex A class surfaces related with an ex Paralevel thingy (blame a collection of unfortunate moments > not my fault officer).

You could use the Cocoon plugin and use the original surface as an input! It's fairly straight forward to use but you may have to play with the settings to get the result you want.

Cocoon

This creates a mesh and you can refine it to get a good one for 3d printing. Since you will probably need to export a mesh for the 3d printing, using Cocoon to create a mesh in the first place is OK.

You could use Meshmixer (free), you first transform your surface to a mesh. You save as obj or stl. Import in MeshMixer, Ctrl +A to select your object, Edit, then Offset  with the sign +/- you want. Click on Connected and you will have a solid.

Has Meshmixer improved much since Autodesk bought it? I tried it a while ago to see how it could handle Mesh Booleans but it was a bit flaky.

I never use it for real purpose, just to answer to some questions. It has some useful utilities, hole in solid to allow the flow of powder. It remesh quite well. I began to use  it to suppress  points inside mesh in order to be able to flatten strips. I ended in doing that with my own grasshopper C#. Thats all I can say. 

Hello Laurant, I am in fact a meshmixer user, I used to use this program to remove the bugs and make 3dsmax nurbs solid before printing, but never knew that this is a possibility. Thank you for your note and detailed explanation, I will let you know how it works!

Hello Laurent, thanks again for your suggestion. I tried meshmixer, it should be a good solution for my issue, but the surface that I get is not very clean even with the maximum accuracy, it is ripped off where the self intersections are. Do you know if there is any way of getting a better result out of this? 

I never 3d print but I am quite sure that there are tools on 3dprint webservice (shapeways, sculpteo ... ) 

I have done some offset for mesh wich work quite well for solid mesh

http://www.grasshopper3d.com/video/offset-of-a-mesh-without-self-in...

http://www.grasshopper3d.com/forum/topics/offset-mesh-problems-with...

You have not a solid mesh but if the free edges are on a plane perpandicular to Z il could be used. 

If you want to send me your file I can look at it. 

It could also be possible to use offset from clipper or Bowerbird in order to have interior curve and then loft them or recreate a mesh in the same way you are making the outside. 

Thank you  Martyn, this looks attractive, have not used it before. I am going to try it and will let you know how it works, Thanks again!

RSS

About

Translate

Search

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2024   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service