Grasshopper

algorithmic modeling for Rhino

Andy,

I was wondering if it is possible to use the firefly as well as a sketch defined within arduino to run at the same time.

Basically, I am looking to run a simple arduino sketch as a serial write i believe to an Arduino Uno while using other compnents within firefly at the same time, the sketch is only using one pin and defining a number and color

Chris

Views: 551

Replies to This Discussion

I'm not sure I completely understand the question.  Firefly is setup to work with the Firefly Firmata.  Once that's uploaded to your board, you can have the Uno Write component stream data to a specific pin on your board.  It's quite easy to control the color of a tri-color LED by sending a PWM value to that pin on the LED.  Does this help?

Sorry Andy, I should have been more clear. I have the firefly firmata uploaded to the board currently. I am driving a series of servos based off of volume in the room.  I am also trying to work with neopixel sketch that I have as an .ino I am having issues with getting the .ino file to be read as well. 

Thanks for your help!

Hi Andy,

I got what you mean. But I am working with a neopixel ring which has only one input. If I want to change its color, how can I do that in firefly?

Thank you!

Hey,

Im having the same issue here.

Could it be possible to adress multiple pwm inputs using Firefly / Arduino controller?

RSS

About

Translate

Search

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2024   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service