generative modeling for Rhino
Multicast feature
Hi,
We have a little project in mind, and we want to use the multicast features of the UDP module, to broadcast data from a sensor to other computers, so they can get the data and make different computations with them.
What's needed for a multicast setup, is at simple as to assign the same IP address (224.0.0.1 i.e.) to both the sender and the receiver (which I can't get it to work), or there is something more?
Thanks in advance.
Views: 63
Replies to This Discussion
-
Permalink Reply by Juan Ma on -
We have a happy ending, don't know what wasn't working before, but it's as simple as that, fill in the gaps, with an appropiate multicast address :)
-
-
Permalink Reply by Luis Fraguada on -
I was about to ask if you had the same port, but it seems you found the issue. Would be cool to see what you are up to!
-
-
Permalink Reply by Juan Ma on
-
We set up a machine with a Kinect sensor attached, that would act as a data server using the UDP multicast feature. Students would then catch the data stream, and do something creative with it in just a day of work :)
We didn't have too much time to stress the scenario, and a plethora of students computer firewall configurations ruined the fun :P Not really, we had some interesting works :)
-
Translate
Search Grasshopper
Photos
© 2012 Created by Scott Davidson.
Powered by
