fit grid to 3d object

Replies to This Discussion

Permalink Reply by Martin Dembski on January 10, 2012 at 1:59am

Hi Claudio,

it also doesn't work for me in XZ direction but it works in all other directions.

Maybe you can use the Eco2DGrid instead or you just rotate your model 90° on the XY plane.

Best,

Martin.

Permalink Reply by Claudio on January 10, 2012 at 10:54am

Yeap indeed, It seams really strange. Do you know where I can get Geco tutorials, the sample files are missing some explanation in my opinion. I must say that I'm not getting good results with this plug-in....Its may be the lack of knowledge on my side...

thank you Martin for your help and time

cheers

Permalink Reply by Martin Dembski on January 10, 2012 at 11:35am

Hi Claudio,

you're welcome.

Geco example files you find here (maybe you already recognized them).

With bad results you mean the results in comparing with other programms, or the results between Ecotect and the reimported results in Grasshopper?

Best,

Martin.

Permalink Reply by Claudio on January 10, 2012 at 3:43pm

By bad results I meant that I've being comparing DIVA (http://www.grasshopper3d.com/group/diva-for-rhino) and Geco. Geco is giving me strange results in comparison with DIVA. But I must say that is probably me, who is not doing it right. Also I noticed that the results from the example files and the results that I get are a bit different, maybe its because of the difference in versions of Geco. But still, I really think that I can break trough and understand how Geco works, its just a question of time.

I'll keep trying and posting question in this forum

thank you again Martin

cheers

claudio