generative modeling for Rhino
weave problem, HELP
hey guys! Im trying to develop a diagrid weaving pattern for a facade, I allready achieved it on a plane, but Im having problems trying to apply it to another surface, Im attaching my deffinitions if somebody could take a look of it would be really appreciated, the first one is the result I want to get, the second one is the error. THANKS alot!
L.
Views: 336
- Attachments:
-
-
facade logic weave diagrid.ghx, 274 KB -
facade logic weaving diagrid 2.ghx, 327 KB
-
Replies to This Discussion
-
Permalink Reply by Danny Boyes on -
Hi Luis,
If you select multiple surfaces with your Srf Param but Graft the input to it (see image) you will get what you need. (Graft is an option on the Right click context menu if you haven't seen this before.)
-
Permalink Reply by Luis Fernando Castro on -
thanks for the tip dany, actually the problem is still happening in the second file named "facade logic weaving diagrid 2" I seem to have a problem with the normal vectors of the points, Im sure it is not a big deal but I cant get it right! any ideas???
Luis
-
Permalink Reply by Danny Boyes on
-
I don't see the problem you're describing. so It must be down to the Grafting of the inputs.
Have a look at the image below:
© 2013 Created by Scott Davidson.
Powered by
