small project with grasshopper

hi all ..

i am design small building using grasshopper , which similar to these pic's i attached .

i am not have a good experience yet with grasshopper , i will be happy if you advice me .

-- the idea is great the building with triangles .

i have to greate :

1- triangle gride wich will be structure. ( the triangles have same size)

2-extrude triangles (with 3 different extruded ).

(will be clear if download the pic)

so i started definitions with triGride ,, how i an set on my surface?

-how i extruded with 3 diferent hight ?

or eny way 2 do it. :(

thanks for your help.

▶ Reply to This

Replies to This Discussion

Permalink Reply by architecture on December 18, 2011 at 12:19pm

is simllar 2 these pic's ..

iam waitting 4 ur advice .. how 2 start with it.

thank you

Attachments:

visuel.jpg, 131 KB
reference_layout11.jpg, 173 KB

▶ Reply

Permalink Reply by lucas cañada on December 19, 2011 at 5:31am

try this deff. still didnt manage random high like pic. hope will help. see you

Attachments:

architecture1.gh, 26 KB

▶ Reply

Permalink Reply by architecture on December 19, 2011 at 8:37am

thankssss i will try this ,, but i cannot open the file !

i dont know why ? i got message ( that unable to read file ) :(

i use mac laptop but i work in windows ,, ...

any one know how i can open this file ??

thanksss alot

▶ Reply

Permalink Reply by lucas cañada on December 19, 2011 at 9:11am

i just can upload again...sorry but if didnt open somebody should help us...

sorry but now i see that triangles havent same size, but this is a start...theres a second step...

Attachments:

architecture1.gh, 26 KB

▶ Reply

Permalink Reply by architecture on December 19, 2011 at 9:57am

thanks alot i will try 2 download it tody ..

how can the triangles be same size .. as the pic's?

(the idea : have same size of triangles + 3 different hight )

i will try with it when i download it.

thank you :)

▶ Reply

Permalink Reply by lucas cañada on December 19, 2011 at 11:31am

could you upload your rhino file with the surface, i think it depends on it to have same size of triangles fitting the hole of surface. Somebody could help us here??

▶ Reply

Permalink Reply by Matt Gaydon on December 19, 2011 at 12:41pm

Hi to you both,

From what i understand from reading Daniel Pikers post in this thread is that have the same size triangles is only possible with certain surfaces.

http://www.grasshopper3d.com/forum/topics/triangulation-scrip-with?...

@ Architecture... I started writting a GH workflow for you in my head last night as did not have GH to Hand, using your workflow, to map the a triangle grid onto a surface. Have a look at the " Map to Surface" component.

With regards to the Scaling and Extrudes should the longer the extrude the smaller the opening at the end or should all the opening be the same size, what ever the lenght of the extrude??

Hope this Helps.

Matt

P.s That post linked is a year old so it maybe possible in Kangaroo now.