shatter curves and radius gradient

Please help! I'm new to GH and unsuccessfully try to combine elements.

setup: see file
- curves - intersection points - circles
- shatter curves
- circles radius gradient - along shattered curves

aim: see jpg

unsolved:
- shatter element shows curves but not seperated at intersection points. what went wrong?
- gradient works from one site but not from the midpoint of each shattered curve
- any ideas how can I avoid overlapping circles in the setup?

Thanks in advance!

Attachments:

Panel.3dm, 33 KB
panel.ghx, 240 KB
panel.jpg, 67 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Alessandro Ronfini on January 12, 2012 at 1:22pm

you are connecting the P output of the intersection into the shatter component, you have to connect the ta output if you want the shatter to work. Also the splitting points and the curves they have to have the same path in order to work.

▶ Reply

Permalink Reply by flipchirps on January 13, 2012 at 3:55am

If I connect the tA output to the shatter component and still use the splitting points, it won't work. Like you said due to different paths (CCX tA=(0;0) and cull i L=(0;0;0) ). Flatten doesn't solve it.

Any ideas how to create the splitting points for the shatter component in another way?