points and polygons

Hello,

Could anybody help me, please.

I have points and I wanted to connect these points with polygons. Is it possible to do in grasshopper if somebody knows, please, let me know.

Thank you,

Eva

▶ Reply to This

Replies to This Discussion

Permalink Reply by Danny Boyes on June 15, 2011 at 10:10am

Do you mean to connect all of these points with a polyline to create a polygon? Or do you mean to place polygons at these points?

Both are possible. The Polyline Component with C set to True will create a closed polyline. And the Move or Orient Components will place existing polygons at your new locations. Or you can use your points for the Base Planes of new polygons.

▶ Reply

Permalink Reply by Eva on June 15, 2011 at 10:40am

Danny, thank you for the quick reply.

I have points and want too create polygons between these points.

I use Delaney grid to create the mesh, and I want to put polygons on this mesh.

Could you, help me, please with that. I attached file.

Attachments:

polygons.ghx, 1.6 MB

▶ Reply

Permalink Reply by Chris Tietjen on June 15, 2011 at 6:15pm

Hi Eva,

If this is what you're talking about just use the Delauney Mesh component. Otherwise, what polygons?

Chris

▶ Reply

Permalink Reply by Eva on June 15, 2011 at 6:18pm

Right, Chris, this is exactly I what I want!!!!!!! My problem was that Delauney mesh was too smooth , how you did it not smooth?

Thank you!!!

▶ Reply

Permalink Reply by Eva on June 15, 2011 at 6:40pm

Chris, could you tell me, please how to make edges angular instead of smooth?

Thank you again for the help

Eva

▶ Reply

Permalink Reply by Chris Tietjen on June 15, 2011 at 7:01pm

Eva,

I moved some of the points out of the XY plane. Is that what you mean?

Chris

▶ Reply

Permalink Reply by Eva on June 15, 2011 at 7:06pm

Chris, sorry for messing around

I want to have rigid edges instead of smooth, when I use Delauney mesh I got smooth edges...I wonder, how you got angular surface instead of smooth?

Eva

▶ Reply

Permalink Reply by Chris Tietjen on June 15, 2011 at 7:27pm

Eva,

Here's a screencast showing you what I did.

http://www.screencast.com/t/GEclSVRsU5OM

I'm not understanding what you mean by angular and smooth in this case. I'm thinking that you're talking about the difference between a planar mesh and a 3-D mesh but I'm not sure.

Chris