Phasma - Developable surfaces definition

Hi Grasshoppers!

Here is the companion you missed...

Why don't you go playing together?

See this discussion too. I think it would be possible to use kangaroo rather than galapagos with this method.

Please post works and comments.

Fred.

Tags: curvature, developable, galapagos, kangaroo, karamba

Attachments:

Phasma 0.9.9b.zip, 959 KB

▶ Reply to This

Replies to This Discussion

Permalink Reply by FrankS on March 21, 2012 at 2:24am

Hi fred,

I am working on devsrfs at the moment and will
definately have a good look at phasma.

Thanks for the tool, videos and instruction.

Best, Frank

▶ Reply

Permalink Reply by Jose Miguel Armijo on March 20, 2012 at 10:47pm

great work, i´ll give it a try

▶ Reply

Permalink Reply by Fred Becquelin on March 21, 2012 at 8:21am

Hi!

Thank you for your interest. if you have any problem feel free to ask for help.

I have a newer version, butit may a bit messy, I'll check it out, tidy up and re release.

Please comment and show me some cool stuff!

Cheers,

Fred.

▶ Reply

Permalink Reply by Jose Miguel Armijo on March 21, 2012 at 10:19am

i'm working with plywood double curvature surfaces, i'm tryng to add a little material dinamics to the stripes, any thoughts?

▶ Reply

Permalink Reply by Fred Becquelin on March 22, 2012 at 5:17am

Hi Jose,

Do you mean molded plywood?

Seems a little off topic! Developable surfaces have single curvature so the whole point is to get rid of double curvature...

Daniel Piker tried to create dev surfaces through "pseudo physical material". I don't know kangaroo very well, so I can't tell you how to set it up, but I think it's the only way to do what you need. You should ask the kangaroo group.

Good luck.

▶ Reply

Permalink Reply by Andrei Hakhovich on August 28, 2012 at 7:38pm

Hi Fred,

I downloaded and tried you definition but it gives me errors. May be you have a new working version that will be compatable with more current build? Thank you in advance.

▶ Reply

Permalink Reply by Fred Becquelin on August 28, 2012 at 11:56pm

Hi andrei,
Yes quite old stuff now... I'll look into it. What errors do you get? Aren't you missing kangaroo? It's required for the dupPts component.
Anyway I shall release a newer version in a couple weeks or so.
Cheers.

▶ Reply

Permalink Reply by Andrei Hakhovich on August 30, 2012 at 3:34pm

Hi Fred, yes, kangaroo gives me an errors, I haven't tried older versions yet.... can you please tell which version you've used. An new updated would be fantastic to have!

▶ Reply

Permalink Reply by Fred Becquelin on September 17, 2012 at 9:41am

Coming soon... I had a lot of debugging to do when updating towards v0.9.xx and I redesigned completely the cusp filter... Also coming with an unroll script, last bugs to get rid of around the following geometry...