Orient (Direction) working as intended ?

Replies to This Discussion

Permalink Reply by David Rutten on April 5, 2011 at 5:32am

Hi Systemik,

 

Orient moves and rotates at the same time. It basically takes geometry from one orthogonal plane to another. Just tested it, seems to work fine.

 

The first plane you have to specify is the orthogonal frame in which the geometry is currently defined. The second plane is the remapping frame.

 

 

--

David Rutten

david@mcneel.com

Poprad, Slovakia

• ▶ Reply

Permalink Reply by Systemiq on April 5, 2011 at 5:54am

Yeah this component with the planes input doesnt cause me any trouble, I was talking about the one using points and vectors :

Here you can see the arrow to the top left being reoriented, with reference point being the start of the curve, target point being same point moved 10 units in x direction, reference direction y, and target direction 2x.

The result is the bottom arrow, which seems correctly oriented and scaled, but isnt starting at target point.

If I get the transformation data, and reapply it sequentially, that gives the green arrow to the right.

So there is something I dont understand somewhere, or something bugged (like rotation and moving not occuring in correct order)

• ▶ Reply

Permalink Reply by David Rutten on April 5, 2011 at 8:18am

Yup, there's a bug here. I'll try and find it.

 

--

David Rutten

david@mcneel.com

Poprad, Slovakia

• ▶ Reply

Permalink Reply by David Rutten on April 5, 2011 at 8:34am

It wasn't a bug in Orient, it was a bug in all the XForm matrix multiplication. Quite serious. Thanks for exposing it.

 

--

David Rutten

david@mcneel.com

Poprad, Slovakia

• ▶ Reply

Permalink Reply by Fred Becquelin on April 13, 2012 at 4:12am

Hi David,

Another bug related to the orient component (or am I missing some part of my brain?)

Cheers

 

Fred.

• ▶ Reply

Permalink Reply by Danny Boyes on April 13, 2012 at 4:35am

How complicated is your referenced Brep?

• ▶ Reply

Permalink Reply by Fred Becquelin on April 13, 2012 at 7:33am

2 joined planes...  :)

• ▶ Reply

Permalink Reply by Danny Boyes on April 13, 2012 at 7:52am

Have you tried with different geometry?

I had a recent project that failed to Orient a few of my surfaces. But there was enough information from the surrounding ones to manually place after baking so I never though more about it.

• ▶ Reply

Permalink Reply by Fred Becquelin on April 13, 2012 at 9:01am

Yes I have. And guess what: I tried to do it by Move + Rotate. Rotate didn't work either.

So as David said it must be a matrix issue. I just posted this just to make sure he wouldn't forget the list management in his fix.

So this is your job? Man I'd love to work on those big boats. Sometimes I'm a little tired of useless yachts for obnoxious millionaires...

• ▶ Reply

Permalink Reply by Danny Boyes on April 13, 2012 at 9:11am

Its even better, it's accident investigation :)

• ▶ Reply