generative modeling for Rhino
meta-ball mesh
How do I control the topography of the meta-ball? I'm getting something like this that is way too exaggerated. I'm trying to get a much less turbulent surface. I've attached my script.
Views: 593
- Attachments:
Replies to This Discussion
-
Permalink Reply by Tudor Cosmatu on -
Hello Liam,
I can't manage to open your file, it s giving me some error... but from what i can tell, you're not using sufficient points for the mesh to be created "correctly".
As i was saying, just a wild guess ;)
-
Permalink Reply by Liam Morrow on -
I used a lunchbox component and a weaver-bird component those might be giving you the problem. I'll try adding more points.
-
Permalink Reply by Liam Morrow on
-
the project is supposed to be a topography for the ceiling.
-
Permalink Reply by Tudor Cosmatu on
-
ok, i guess the lunchbox is not showing up for me.... can u post an image with the points you're using for the MeshFromPoints?
-
Permalink Reply by Liam Morrow on
-
-
Permalink Reply by Liam Morrow on
-
the divide curve component is good for the smaller iso curves but the larger ones have a large distance between points. I upped the divide curve to 50 pts and it got worse.
-
Permalink Reply by Tudor Cosmatu on
-
you could first give it a try with the length division, and divide all curves with the same length.
Another go at it would be to intersect all curves with a series of xz and yz planes giving you an "equally" spaced division of your curves
Translate
Search Grasshopper
Photos
Videos
© 2013 Created by Scott Davidson.
Powered by
