Loading Error - "Unable to load DLL 'rhcommon_c...'

If Grasshopper fails on loading with the error message "... side-by-side configuration is incorrect ...", it means the runtimes on your Windows are not compatible with Grasshopper. This will only happen when running Grasshopper 0.8.0016 or later in Rhino version 4.0 (must be later than SR8). Follow these steps until Grasshopper loads successfully again.

First stage:

Install the Microsoft VC++ Runtimes 32-bit version: vcredist_x86.EXE

Second stage:

Update your Operating System from Microsoft Windows Updates.

Third Stage:

(If your are running a 64-bit version of Windows, typically on a Mac)

Install the 64-Bit version: vcredist_x64.EXE from the link above. Then install the 32-Bit version: vcredist_x86.EXE again.

Tags: Load, configuration, dll, loading, runtimes, side, side-by-side

▶ Reply to This

Replies to This Discussion

Permalink Reply by karthu karthik on May 23, 2012 at 6:45am

▶ Reply

Permalink Reply by Danny Boyes on May 23, 2012 at 6:53am

The message says it all. Download the latest Service Release for Rhino. It should be SR9, you will need your CD-Key that came with your Rhino Installation Disc. http://download.rhino3d.com/Rhino/4.0/sr/download/

▶ Reply

Permalink Reply by karthu karthik on May 23, 2012 at 6:56am

thanks a lot

▶ Reply

Permalink Reply by prachi bora on June 18, 2012 at 11:22pm

hey thanks a lot it helped in my case...:)

▶ Reply

Permalink Reply by Dominik Nuessen on July 27, 2012 at 1:31am

I had the same problem on several computers... Thank you David, it works now!

▶ Reply

Permalink Reply by Shieldsy on August 14, 2012 at 8:31pm

Hi David,

I have tried all of the above in various combinations and can't seem to get it working.

I am running Rhino 4.0 SR9 on via Bootcamp Windows 7, iMac.

Any help would be much appreciated.

Ben

▶ Reply

Permalink Reply by Danny Boyes on August 15, 2012 at 2:49am

Hi Ben,

can you confirm that the error message you get is the same as the one on this page. And that the files you used to update the c++ runtimes were the 2005 versions and obtained only from this page.