Grasshopper

generative modeling for Rhino

Intersection doesn't work propertly!!!

Hello. I have a problem with my def. When i work in GH everything seems ok, but when i bake it, something goes wrong. I tried a lot of ways to solve this problem, but it has not gone. I need to solve it as fast as i can, and i beg for your help. Thank you :)

 

Tags: intersection, substraction

Views: 25

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by TiM on January 22, 2010 at 1:45am

This is what i get

Permalink Reply by David Rutten on January 22, 2010 at 2:44am
Tim,

looks like the mesher is getting confused. Grasshopper most likely uses different meshing settings than your Rhino document, so if there's a discrepancy, it's probably due to this difference.

If you post the actual geometry, we can have a look at why it is meshing incorrectly.

--
David Rutten
david@mcneel.com
Poprad, Slovakia
Permalink Reply by TiM on January 22, 2010 at 4:31am
Hello, David. I don't understand you. What geometry? I've attached my def - that's all i have. This geometry was made from the GH cilynder...
Permalink Reply by luca.pavarin on January 22, 2010 at 5:43am
You need to increase your mesh setting!
Permalink Reply by TiM on January 22, 2010 at 5:57am
are you talking about the amount of faces of this geometry or what?
Permalink Reply by luca.pavarin on January 22, 2010 at 6:05am
In Rhino, go to: Tools -> Options -> Mesh, and change the render mesh quality (custom).
It should work!
Permalink Reply by TiM on January 22, 2010 at 7:44am
Luca, you are my savior! Everything works!!!! Thank you, Luca! Thank you, David! Good luck to you!

RSS

Translate

Search Grasshopper

Members

Photos

  • Add Photos
  • View All

© 2012   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service