Help with Geometry Gym!!

Replies to This Discussion

Permalink Reply by Chris Tietjen on March 12, 2011 at 6:06pm

Check this out.

You  need the plugin to complete the definition.

 

Chris

• ▶ Reply

Permalink Reply by Valeria Sanchez Roji on March 12, 2011 at 6:13pm

Heyy.. thankss for that.. but i've already done that...  my problem is taht i don't know the name of the component... i already have geometry gym.... i hope somebody can help  me... thankss again

• ▶ Reply

Permalink Reply by Aaron Coffman on March 12, 2011 at 7:24pm

its called mesh inflate.  if you just double click on the canvas and quick type "inflate" it should come up.

• ▶ Reply

Permalink Reply by Valeria Sanchez Roji on March 13, 2011 at 4:43pm

Hi Aaron!

 

I think i found the command, but im not sure of what im doing wrong! Could you check out my deffinition and see if you can find what's wrong??

I added everithing necessary but it doesn't work!

 

Thank you!!!

Attachments:

• Mesh_Inflate.ghx, 103 KB

• ▶ Reply

Permalink Reply by Daniel Piker on March 13, 2011 at 4:54pm

Hi Valeria,

 

You might also want to try the mesh inflation in Kangaroo. It is fairly simple to operate, and can be easily combined with other forces, and interacted with live.

There are some examples here:

http://www.grasshopper3d.com/group/kangaroo/forum/topics/inflatable...

• ▶ Reply

Permalink Reply by Valeria Sanchez Roji on March 13, 2011 at 5:19pm

I tried to instalate mesh edit and i don't know why the program doesn't respond... the program says that there is an error.. but i don't know why..

• ▶ Reply

Permalink Reply by Daniel Piker on March 13, 2011 at 6:19pm

mesh edit ? do you mean UTO's mesh tools ? what error ?

• ▶ Reply

Permalink Reply by Jon Mirtschin on March 13, 2011 at 11:35pm

I haven't received a license request email from you, so the component will remain red until I send you a validated file.  If you are having difficulties with this, let me know which step is posing problems and I will clarify.

• ▶ Reply

Permalink Reply by Valeria Sanchez Roji on March 17, 2011 at 7:07pm

Sorry for not replied before, but i haven´t been able to.

I don´t have outlook! What can I do ?

• ▶ Reply

Permalink Reply by Jon Mirtschin on March 17, 2011 at 7:42pm

Hi Valeria,

 

The license request command also copies the data I need to windows clipboard, you can paste (Menu-Edit-Paste) into an email to me in an internet browser, jonm@geometrygym.com

 

Else, you can locate the license file GeomgymLicense.xml in either (C:\ProgramData\GeometryGym (Win7 or Vista) orC:\Documents and Settings\All Users\Application Data\GeometryGym ) , the folder is hidden by default so you may have to enable viewing system folders in Windows File Explorer Options menu (use ALT key to access).

 

I will be looking to make this easier for those that don't have email clients (such as outlook) installed.

 

Thanks,

Jon

 

• ▶ Reply

Permalink Reply by Jon Mirtschin on March 12, 2011 at 7:27pm

Hi Valeria,

If you have StructDrawRhino installed, then you should have been prompted to request a license for the plugin (rhino command sdrZZLicenseRequest ), installation instructions are outlined here:
http://www.grasshopper3d.com/group/geometrygym/forum/topics/install... I do work full time on the development of these tools, and rely on license fees for commercial use to do so.

Then, there the sample model shown in the clip can be downloaded here: http://geometrygym.blogspot.com/2010/05/mesh-inflation-in-grasshopp...

Let me know if this isn't clear.

Cheers,

Jon

• ▶ Reply

Permalink Reply by Valeria Sanchez Roji on March 13, 2011 at 4:52pm

Hi Jon!

 

Yes, i've been prompted to request a license, but i been told that for students there is a free version!?....What can i do to get the licence then!?

 

We are students from the ITESM (Tecnological Institute of Monterrey) and we are working on a project for Arq. Alejandro Rodriguez on parametric architecture.

 

Any kind of info is of great help!!

 

Thank you!

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page