extruding subdivision mesh

Replies to This Discussion

Permalink Reply by Giulio Piacentino on October 21, 2009 at 11:23am

Hi Enrique,

well I'm glad you used this quick implementation of subdivisions. I really like your approach. I'm actually writing a more precise and native "column" operation, so hold on and it will be standard, just like frames. For the time being, I'd suggest this approach, which is a bit cumbersome but has an advantage: it's quicker (all operations as meshes).

The boolean union works out the total volume resulting from two closed meshes (same as Rhino's _MeshBooleanUnion) and does not work like Rhino's _Join command. So it cannot be used in this case. There is no such command like _Join for meshes in Gh at present, and we need to deconstruct and reconstruct the total topology.

Let me know what you think,

- Giulio
____________________________
giulio@mcneel.com
McNeel Europe - Barcelona

Attachments:

• extrude-005.ghx, 442 KB

• ▶ Reply

Permalink Reply by enrique soriano on October 21, 2009 at 11:31am

Yeah!!
brillliant / it looks yummy
as i supposed, keeping in meshes would speed it up.

grazie mille
enrique

• ▶ Reply

Permalink Reply by to] on October 21, 2009 at 1:08pm

hi piac

thanx for the great plugin it really saves so many hours with exporting
would be a pleasure to have a look onto your catmull-clark and frame code ;)
isn't their a possibility to just get the rhino meshoffset solidify command inside grasshopper?
maybe with a rhutil? , but i really like your approach of shifting the values

to]

• ▶ Reply

Permalink Reply by Giulio Piacentino on October 23, 2009 at 4:46am

Hi to],

it could be possible to use the RhUtil.RhinoMeshOffset(...), but that yields to the offset itself, and not the solidified version you can have with the Rhino command. So for now we can write it on our own in Grasshopper (nice counting exercise!). This definition also shows the source of inspiration for the name of the plugin, "WeaverBird" :)

- Giulio

• ▶ Reply

Permalink Reply by to] on October 23, 2009 at 5:18am

Hi giulio

oh i thought there is maybe a hidden command for the solidify then i keep the way i doing currently with counting (its really a nice job ;))
you are writing about "column operation", what are you planing?
and maybe when do you think to release that update on weaverbird?
maybe it would also not bad to get a access to the faces @ the frame command to move or extrude them like in 3dsmax (sublevel-style)
what do you think about that? or change their scale due to several influences

- to]

• ▶ Reply

Permalink Reply by Giulio Piacentino on October 26, 2009 at 1:02pm

Hi again to],

the column operation would be based on some dual in the http://en.wikipedia.org/wiki/Conway_polyhedron_notation . This means that it potentially could add faces with more than 4 vertices. I could tringulate these faces, but it would not really be a very neat solution. So I'd rather add user data to keep track of those extraordinary polygons. This is a long-term goal. For the next release of Grasshopper there will be a new version of WeaverBird and it will have some new components to facilitate working with meshes, as well as the component version of the definition above with parallel processing support. If you have other ideas I should not miss please let me know!

- Giulio

• ▶ Reply

Permalink Reply by to] on October 26, 2009 at 1:16pm

thanks giulio
oh perfect faces with more than 4 vertices...now rhino is closing the gap to 3dsmax and maya with polygon modeling
when do you and david plan to release the next gh version?
i will think about missing solution
- welding (alining mesh vertices i think inside rhino) would also be great for other to be implemented in gh

-to]

• ▶ Reply

Permalink Reply by Giulio Piacentino on October 26, 2009 at 1:27pm

Hey thank you to]. That's really for David to tell. I can only tell you about WeaverBird. Welding is easy in the SDK and it will be there (maybe in Gh itself).

- Giulio

• ▶ Reply

Permalink Reply by to] on October 26, 2009 at 2:36pm

to welding - i have already written it in vbnet but i thought for including it for others
the same to join meshes (.append)
best to] hope to test your tools soon

• ▶ Reply

Permalink Reply by Andrew Lyon on October 21, 2009 at 1:17pm

I get several io failures and it looks like I am missing some components when I try to open this. is there anythign I'm mising?

• ▶ Reply

Permalink Reply by Giulio Piacentino on October 23, 2009 at 4:48am

Hi Andrew,

this is probably because you need to have WeaverBird installed to open this file. See the installation instructions coming with the archive.

- Giulio

• ▶ Reply

Permalink Reply by Luis Fraguada on October 26, 2009 at 3:25am

That is great Giulio...just tossed a few different meshes in there and it operated on them like a charm.

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page