Grasshopper

generative modeling for Rhino

design small building in grasshopper

hello all

I am trying to design modular building has cube shape and each cube has double surface in top and buttom and the cubes should be like this pic http://www.grasshopper3d.com/photo/pensilina-432?xg_source=activity. i have started the definition but i'm not sure if i can get the same shape.

The attached image is an example of what I am trying to emulate.

Thank you.

Views: 741

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by lucas cañada on December 17, 2011 at 3:59pm

try this deffinition, longitudinal structure isn´t in this approach. Cheers

Attachments:
Permalink Reply by shatha T on December 17, 2011 at 4:42pm

Thanks Lucas,

that's really helpful, i'm trying to have double surface because the building extend system from both side.
how can i separate between these components as pic and have double surface.

I'm now trying to understand the definition.

Attachments:
Permalink Reply by Chris Tietjen on December 17, 2011 at 9:00pm

You should be able to set this up to have individual control of as many segments as you wish.  I'm not sure what you mean by 'double surface'.  Are you talking about a shell, ie. an inner and outer surface for each segment or do you mean something else?

Chris

Attachments:
Permalink Reply by shatha T on December 18, 2011 at 4:55am

thanks chris

yes it is inner and outer surface for each segment. The attached image is explain what i mean with double surface 

the outer surface has ability to separate to have more space inside the building.

sorry for bad explain i'm new in grasshopper.

Permalink Reply by Chris Tietjen on December 18, 2011 at 7:40am

Here's a screencast showing a solution for one segment.

Attachments:
Permalink Reply by shatha T on December 18, 2011 at 1:07pm

thanks Chris yes this what i'm looking for the double surface and the way for extend 

Thank you

Permalink Reply by lucas cañada on December 18, 2011 at 12:21pm

still didnt try the "double surface". Hope helps ;)

Attachments:
Permalink Reply by shatha T on December 18, 2011 at 1:14pm

hello lucas

that is great details thank you so much. 

I'm still trying to understand the definitions.

Permalink Reply by lucas cañada on December 18, 2011 at 1:56pm
Begin with last one. When I arrive home i will group components to try show you how it works(its quite dissordered
Permalink Reply by lucas cañada on December 18, 2011 at 2:33pm

ask all you need! Cheers

Attachments:
Permalink Reply by shatha T on December 18, 2011 at 2:56pm

Thank you for your response that is really great.
sorry i have many questions
- if i want to use just one segment as pic what should i do?
- how can i implement this definition with Chris's solution for double surface on top? 

Thank you :)

Permalink Reply by lucas cañada on December 18, 2011 at 5:05pm

try another way. See you tomorrow

Attachments:

RSS

Translate

Search Grasshopper

Photos

  • Add Photos
  • View All

Videos

  • Add Videos
  • View All

© 2013   Created by Scott Davidson.   Powered by

Badges  |  Report an Issue  |  Terms of Service