Bake Colored Geometry

Hi there, I was testing some designs with the image sampler over various surfaces I divided, and actually ended up liking the resulting design, but I can't seem to Bake the resulting geometry, at least not with the material i'm trying out. Any help would be appreciated.

Attachments:

ayuda1.png, 245 KB
Edificio 05-2.gh, 4.5 MB

▶ Reply to This

Replies to This Discussion

Permalink Reply by Michael Pryor on March 21, 2012 at 9:48am

you need this component called bake attributes. http://www.giuliopiacentino.com/grasshopper-tools/

▶ Reply

Permalink Reply by Danny Boyes on March 21, 2012 at 9:50am

Reverend Doctor Danny Rockefeller recommends you give Guilio's BakeAttributes Component a go.

PS forgive the "in joke" it really is a great component.

▶ Reply

Permalink Reply by taz on March 21, 2012 at 10:24am

Where's the pimp cane?

(The pimp handle is heavy)

▶ Reply

Permalink Reply by Danny Boyes on March 21, 2012 at 11:46am

Like this one:

▶ Reply

Permalink Reply by Ignacio España on March 21, 2012 at 10:07am

Thanks for the help guys. Now, I know this sounds really dumb, but i've been trying to make that component work since yesterday, but can't manage to figure it out :(

▶ Reply

Permalink Reply by Michael Pryor on March 21, 2012 at 10:27am

in object goes your geometry, in color goes the color pattern, in layer type a name of a layer you wish to bake to (it will make this as a new layer), in material plug a custom material component and set settings how you want, for gloss ect., plug a Boolean toggle into activate and switch it to true.

▶ Reply

Permalink Reply by Ignacio España on March 21, 2012 at 10:42am

I thought that's what I was doing, but can't get a result. No idea what is it that I'm plugging the wrong way/not plugin.

Attachments:

ayuda2.png, 216 KB
ayuda2.gh, 4.5 MB

▶ Reply

Permalink Reply by Michael Pryor on March 21, 2012 at 11:02am

I don't have gh at the moment but I can tell a few things, for color the input should be what ever the same data is that creates the preview, I also see some orange components maybe that is an issue, lastly from experience I have learned in bake attributes isn't working it is most likely you are not matching your data/ lists correctly. Also, you need to name a layer in the layer input.

▶ Reply

Permalink Reply by Danny Boyes on March 21, 2012 at 11:15am

Yes the orange components were the fault.

Attached is a corrected version so that you can see the mistake.

But there is also an improved version that removes the duplication aspect and shows the BakeAttributes connected up. You don't need to supply a Layer as it will default to "Default" but if you have renamed this or have it hidden then you will not see any results.

REMEMBER TO SET THE TOGGLE TO FALSE AFTER IT HAS BAKED!

PS I had to change the image as it seemed to not work as intended

Attachments: